[PATCH v4 4/4] drm/bridge: ti-sn65dsi83: Add vcc supply regulator support

[Jagan Teki]

On Thu, Nov 18, 2021 at 2:50 PM Alexander Stein
<alexander.stein at ew.tq-group.com> wrote:
>
> VCC needs to be enabled before releasing the enable GPIO.
>
> Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> ---
>  drivers/gpu/drm/bridge/ti-sn65dsi83.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi83.c b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> index 065610edc37a..54d18e82ed74 100644
> --- a/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> +++ b/drivers/gpu/drm/bridge/ti-sn65dsi83.c
> @@ -33,6 +33,7 @@
>  #include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_bridge.h>
> @@ -143,6 +144,7 @@ struct sn65dsi83 {
>         struct mipi_dsi_device          *dsi;
>         struct drm_bridge               *panel_bridge;
>         struct gpio_desc                *enable_gpio;
> +       struct regulator                *vcc;
>         int                             dsi_lanes;
>         bool                            lvds_dual_link;
>         bool                            lvds_dual_link_even_odd_swap;
> @@ -337,6 +339,12 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge,
>         u16 val;
>         int ret;
>
> +       ret = regulator_enable(ctx->vcc);
> +       if (ret) {
> +               dev_err(ctx->dev, "Failed to enable vcc\n");
> +               return;
> +       }

Better check the vcc and enable it since it is an optional one.

Jagan.