Habanalabs, Ask for the linux firmware code which loads by coprocesseor

[Oded Gabbay]

On Tue, Dec 7, 2021 at 9:19 AM Cai Huoqing <cai.huoqing at linux.dev> wrote:
>
> Hi Oded Gabbay and habanalabs folks.
>
> I'm insterested in this kind of AI acceralator.
>
> After scanning the driver code.
> It seems that there are a linux firmware which is loaded by
> coprocessor(an slave cpu ?).
> shows in the code.
>
> ./goya/goya.c:74:#define GOYA_LINUX_FW_FILE     "habanalabs/goya/goya-fit.itb"
> ./goya/goya.c:2436:     return hl_fw_load_fw_to_device(hdev, GOYA_LINUX_FW_FILE, dst, 0, 0);
> ./goya/goya.c:2507:     fw_loader->linux_img.image_name = GOYA_LINUX_FW_FILE;
> ./gaudi/gaudi.c:63:#define GAUDI_LINUX_FW_FILE  "habanalabs/gaudi/gaudi-fit.itb"
> ./gaudi/gaudi.c:3945:   return hl_fw_load_fw_to_device(hdev, GAUDI_LINUX_FW_FILE, dst, 0, 0);
> ./gaudi/gaudi.c:4011:   fw_loader->linux_img.image_name = GAUDI_LINUX_FW_FILE;
>
> And the host driver(/driver/misc/habanalabs) communicate with the slave firmware
> by MMIO or share memory, right?
>
> If that, would you mind provide the source code of linux firmware
> to avoid the confusion from code reading.
Hi Cai,

You can download the source code from:
https://vault.habana.ai/artifactory/misc/hl-linux.bz2

>
> BTW, where can I find the register description datasheet
We don't supply this information.
Thanks,
Oded