[PATCH 09/17] soc: mediatek: apu: Add Apu power driver
Flora Fu
flora.fu at mediatek.com
Fri Dec 10 17:25:57 UTC 2021
Add APU power driver to support for subsys clock
and regulator controller.
Add MT8192 platform APU power driver's platform data.
Signed-off-by: Flora Fu <flora.fu at mediatek.com>
---
drivers/soc/mediatek/apusys/Kconfig | 23 +
drivers/soc/mediatek/apusys/Makefile | 5 +
drivers/soc/mediatek/apusys/apu-pwr-dbg.c | 167 ++++++
drivers/soc/mediatek/apusys/apu-pwr-ipi.c | 377 +++++++++++++
drivers/soc/mediatek/apusys/apu-pwr.c | 613 ++++++++++++++++++++++
drivers/soc/mediatek/apusys/apu-pwr.h | 260 +++++++++
6 files changed, 1445 insertions(+)
create mode 100644 drivers/soc/mediatek/apusys/apu-pwr-dbg.c
create mode 100644 drivers/soc/mediatek/apusys/apu-pwr-ipi.c
create mode 100644 drivers/soc/mediatek/apusys/apu-pwr.c
create mode 100644 drivers/soc/mediatek/apusys/apu-pwr.h
diff --git a/drivers/soc/mediatek/apusys/Kconfig b/drivers/soc/mediatek/apusys/Kconfig
index 332e323e02ae..1daf73c74c17 100644
--- a/drivers/soc/mediatek/apusys/Kconfig
+++ b/drivers/soc/mediatek/apusys/Kconfig
@@ -11,4 +11,27 @@ config MTK_APU_PM
APU power domain shall be enabled before accessing the
internal sub modules.
+config MTK_APU
+ tristate "MediaTek APUSYS Support"
+ select REGMAP
+ select MAILBOX
+ select MTK_APU_MBOX
+ select MTK_APU_RPROC
+ select MTK_SCP
+ help
+ Say yes here to add support for the APU tinysys and enable
+ sub modules include apu power and middleware.
+ The tinysys firmware is loaded and booted from Kernel side through
+ rproc framework. The related sub modules in application processor
+ use IPI to communicate with APU tinysys.
+
+config MTK_APU_DEBUG
+ tristate "MediaTek APUSYS debug functions"
+ depends on MTK_APU
+ help
+ Say yes here to enable debug features in APU.
+ The debug configuration will enable kernel driver debug and register a
+ logger for retrieving debug logs from remote processor.
+ Disable it if you don't need them.
+
endif # MTK_APUSYS
diff --git a/drivers/soc/mediatek/apusys/Makefile b/drivers/soc/mediatek/apusys/Makefile
index 8821c0f0b7b7..8fff18d63dc1 100644
--- a/drivers/soc/mediatek/apusys/Makefile
+++ b/drivers/soc/mediatek/apusys/Makefile
@@ -1,2 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_MTK_APU_PM) += mtk-apu-pm.o
+
+obj-$(CONFIG_MTK_APU) += mtk_apu_pwr.o
+mtk_apu_pwr-objs += apu-pwr.o
+mtk_apu_pwr-objs += apu-pwr-ipi.o
+mtk_apu_pwr-$(CONFIG_MTK_APU_DEBUG) += apu-pwr-dbg.o
diff --git a/drivers/soc/mediatek/apusys/apu-pwr-dbg.c b/drivers/soc/mediatek/apusys/apu-pwr-dbg.c
new file mode 100644
index 000000000000..ee81271cbb2c
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-pwr-dbg.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/seq_file.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+
+#include "apu-pwr.h"
+
+#define DEBUG_MAX_ARGS_NUM (5)
+
+struct dentry *apu_power_debugfs;
+
+static int apu_power_set_parameter(struct apu_power *apupwr,
+ enum APU_POWER_PARAM param,
+ u32 argc, u32 *args)
+{
+ struct device *dev = apupwr->dev;
+ int ret = 0;
+
+ switch (param) {
+ case POWER_PARAM_FIX_OPP:
+ if (args[0] == 0) {
+ apu_update_fixed_opp_by_reg(dev, 0xffffffff);
+ apu_power_notify_uP_opp_limit(apupwr,
+ OPP_LIMIT_FIX_OPP);
+ }
+ break;
+ case POWER_PARAM_DVFS_DEBUG:
+ if (args[0] >= 0 && args[0] <= 0xffffffff) {
+ apu_update_fixed_opp_by_reg(dev, args[0]);
+ apu_power_notify_uP_opp_limit(apupwr,
+ OPP_LIMIT_DVFS_DEBUG);
+ }
+ break;
+ case POWER_PARAM_ULOG_LEVEL:
+ ret = (argc == 1) ? 0 : -EINVAL;
+ if (ret) {
+ dev_err(dev,
+ "invalid argument, expected:1, received:%d\n",
+ argc);
+ goto out;
+ }
+ apupwr->dbg_option = POWER_PARAM_ULOG_LEVEL;
+ apupwr->ulog_level = args[0];
+ apu_power_set_ulog_level(apupwr, args[0]);
+ break;
+
+ default:
+ dev_err(dev, "unsupport the power parameter:%d\n", param);
+ break;
+ }
+
+out:
+ return ret;
+}
+
+static int apu_power_dbg_show(struct seq_file *s, void *unused)
+{
+ struct apu_power *apupwr = (struct apu_power *)s->private;
+ u32 ulog_level = apupwr->ulog_level;
+ u32 dbg_option = apupwr->dbg_option;
+
+ switch (dbg_option) {
+ case POWER_PARAM_ULOG_LEVEL:
+ seq_printf(s, "ulog_level = %d\n", ulog_level);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int apu_power_dbg_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, apu_power_dbg_show, inode->i_private);
+}
+
+static ssize_t apu_power_dbg_write(struct file *filp,
+ const char __user *buffer,
+ size_t count, loff_t *f_pos)
+{
+ struct apu_power *obj = file_inode(filp)->i_private;
+ char *tmp, *token, *cursor;
+ int ret, i;
+ enum APU_POWER_PARAM param;
+ unsigned int args[DEBUG_MAX_ARGS_NUM];
+
+ tmp = kzalloc(count + 1, GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ ret = copy_from_user(tmp, buffer, count);
+ if (ret) {
+ dev_err(obj->dev, "copy_from_user failed, ret=%d\n", ret);
+ goto out;
+ }
+
+ tmp[count] = '\0';
+ cursor = tmp;
+
+ /* parse a command */
+ token = strsep(&cursor, " ");
+ if (strcmp(token, "fix_opp") == 0) {
+ param = POWER_PARAM_FIX_OPP;
+ } else if (strcmp(token, "dvfs_debug") == 0) {
+ param = POWER_PARAM_DVFS_DEBUG;
+ } else if (strcmp(token, "ulog") == 0) {
+ param = POWER_PARAM_ULOG_LEVEL;
+ } else {
+ ret = -EINVAL;
+ dev_err(obj->dev, "no power param[%s]!\n", token);
+ goto out;
+ }
+
+ /* parse arguments */
+ for (i = 0;
+ i < DEBUG_MAX_ARGS_NUM && (token = strsep(&cursor, " ")); i++) {
+ ret = kstrtouint(token, 0, &args[i]);
+ if (ret) {
+ dev_err(obj->dev, "fail to parse args[%d]\n", i);
+ goto out;
+ }
+ }
+
+ apu_power_set_parameter(obj, param, i, args);
+ ret = count;
+out:
+ kfree(tmp);
+ return ret;
+}
+
+static const struct file_operations apu_power_dbg_fops = {
+ .open = apu_power_dbg_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+ .write = apu_power_dbg_write,
+};
+
+void apu_power_debugfs_init(struct apu_power *apupwr)
+{
+ int ret;
+
+ apu_power_debugfs = debugfs_create_dir("apu_power",
+ apupwr->dbg_root);
+ ret = IS_ERR_OR_NULL(apu_power_debugfs);
+ if (ret) {
+ dev_err(apupwr->dev, "failed to create debug dir.\n");
+ apu_power_debugfs = NULL;
+ }
+
+ debugfs_create_file("power", (0644),
+ apu_power_debugfs, apupwr, &apu_power_dbg_fops);
+}
+
+void apu_power_debugfs_exit(void)
+{
+ debugfs_remove_recursive(apu_power_debugfs);
+}
diff --git a/drivers/soc/mediatek/apusys/apu-pwr-ipi.c b/drivers/soc/mediatek/apusys/apu-pwr-ipi.c
new file mode 100644
index 000000000000..c7bbcd1de73d
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-pwr-ipi.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+#include "apu-pwr.h"
+
+#define APU_TX_MSG_TIMEOUT 1000
+#define RX_MAGIC0 0xaabb
+#define RX_MAGIC1 0xccdd
+
+#define to_rpmsg_driver(__drv) container_of(__drv, struct rpmsg_driver, drv)
+#define tx_to_apu_power(__d) \
+ container_of(__d, struct apu_power, tx_rpmsg_driver)
+#define rx_to_apu_power(__d) \
+ container_of(__d, struct apu_power, rx_rpmsg_driver)
+
+struct apu_power_rpmsg {
+ struct rpmsg_device *rpdev;
+ struct rpmsg_endpoint *ept;
+ struct mutex lock; /* wait remote msg */
+ struct completion comp;
+ int initialized;
+ struct power_ipi_cmd_reply ipi_rply;
+};
+
+static int apu_power_tx_send(struct apu_power *apupwr,
+ struct power_cmd_AP *pcmd,
+ u32 *data0, u32 *data1)
+{
+ struct rpmsg_device *rpdev = apupwr->tx_rpmsg_device;
+ struct apu_power_rpmsg *power_rpmsg = dev_get_drvdata(&rpdev->dev);
+ struct power_ipi_cmd_AP ipi_cmd_send;
+ struct timespec64 ts64;
+ unsigned long timeout = msecs_to_jiffies(APU_TX_MSG_TIMEOUT);
+ u64 timestamp;
+ int ret = 0;
+
+ if (!power_rpmsg || !power_rpmsg->initialized) {
+ dev_err(&rpdev->dev, "%s: rpmsg not valid\n", __func__);
+ ret = -EINVAL;
+ return ret;
+ }
+
+ memset(&ipi_cmd_send, 0, sizeof(struct power_ipi_cmd_AP));
+ ktime_get_real_ts64(&ts64);
+ timestamp = ((ts64.tv_sec & 0xFFF) * USEC_PER_SEC) +
+ (ts64.tv_nsec / NSEC_PER_USEC);
+ ipi_cmd_send.cmd_sn = (u32)timestamp;
+ ipi_cmd_send.pwr_cmd = *pcmd;
+
+ /* transport normal raw data */
+ ipi_cmd_send.data0 = *data0;
+ ipi_cmd_send.data1 = *data1;
+
+ mutex_lock(&power_rpmsg->lock);
+ reinit_completion(&power_rpmsg->comp);
+
+ ret = rpmsg_send(power_rpmsg->ept,
+ (void *)&ipi_cmd_send, sizeof(ipi_cmd_send));
+ if (ret) {
+ dev_err(&rpdev->dev,
+ "%s: failed to send msg to remote, ret=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+ ret = wait_for_completion_interruptible_timeout(&power_rpmsg->comp,
+ timeout);
+ if (ret <= 0) {
+ dev_err(&rpdev->dev,
+ "%s waiting for ack interrupted or timeout, ret=%d\n",
+ __func__, ret);
+ goto out;
+ }
+
+out:
+ mutex_unlock(&power_rpmsg->lock);
+ return ret;
+}
+
+void apu_power_set_ulog_level(struct apu_power *apupwr,
+ int level)
+{
+ struct power_cmd_AP pwr_cmd;
+ u32 data0;
+ u32 data1;
+
+ memset(&pwr_cmd, 0, sizeof(struct power_cmd_AP));
+ memset(&data0, 0, sizeof(u32));
+ memset(&data1, 0, sizeof(u32));
+
+ pwr_cmd.req_id = CHANGE_LOG_LEVEL;
+ data0 = level;
+ apu_power_tx_send(apupwr, &pwr_cmd, &data0, &data1);
+}
+
+void apu_power_notify_uP_opp_limit(struct apu_power *apupwr,
+ enum request_id_AP req)
+{
+ struct power_cmd_AP pwr_cmd;
+ u32 data0;
+ u32 data1;
+
+ memset(&pwr_cmd, 0, sizeof(struct power_cmd_AP));
+ memset(&data0, 0, sizeof(u32));
+ memset(&data1, 0, sizeof(u32));
+
+ pwr_cmd.req_id = req;
+ switch (pwr_cmd.req_id) {
+ case OPP_LIMIT_THERM:
+ case OPP_LIMIT_FIX_OPP:
+ case OPP_LIMIT_DVFS_DEBUG:
+ break;
+ default:
+ return;
+ }
+
+ apu_power_tx_send(apupwr, &pwr_cmd, &data0, &data1);
+}
+
+static int apu_power_rx_callback(struct rpmsg_device *rpdev, void *data,
+ int len, void *priv, u32 src)
+{
+ struct apu_power_rpmsg *power_rpmsg = dev_get_drvdata(&rpdev->dev);
+ struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
+ struct apu_power *apupwr = rx_to_apu_power(rpdrv);
+ int ret = 0;
+ struct device *dev = &rpdev->dev;
+ struct power_ipi_cmd_uP *received_data = NULL;
+ struct power_ipi_cmd_reply reply_data;
+ static u32 prev_cmd_sn;
+ u32 cmd_sn;
+ struct power_cmd_uP pwr_cmd;
+ u32 data0;
+ u32 data1;
+
+ if (!len) {
+ dev_warn(dev, "apu power rpmsg received empty cmd");
+ return -EINVAL;
+ }
+
+ received_data = data;
+ cmd_sn = received_data->cmd_sn;
+ pwr_cmd = received_data->pwr_cmd;
+ data0 = received_data->data0;
+ data1 = received_data->data1;
+
+ if (cmd_sn != prev_cmd_sn)
+ prev_cmd_sn = cmd_sn;
+ else
+ return -EINVAL;
+
+ switch (pwr_cmd.req_id) {
+ case CHANGE_DEV_CLKSRC:
+ /*
+ * received_data.data0 : user
+ * received_data.data1 : on
+ */
+ if (data1 == 1)
+ ret = apu_enable_dev_clksrc(apupwr->dev, data0);
+ else
+ apu_disable_dev_clksrc(apupwr->dev, data0);
+ break;
+ case CHANGE_DEV_CLOCK:
+ /*
+ * received_data.data0 : target_freq
+ * received_data.data1 : volt_domain
+ */
+ ret = apu_set_clk_freq(apupwr->dev, data0, data1);
+ break;
+ case CHANGE_SYS_VCORE:
+ /*
+ * received_data.data0 : user
+ * received_data.data1 : vcore_opp
+ */
+ ret = apu_config_vcore_volt(apupwr->dev, data1);
+ break;
+ default:
+ dev_err(dev, "invalid request id:%d (cmd_sn:0x%08x)\n",
+ pwr_cmd.req_id,
+ cmd_sn);
+ return -EINVAL;
+ }
+
+ /* prepare reply data to remote */
+ memset(&reply_data, 0, sizeof(struct power_ipi_cmd_reply));
+ reply_data.cmd_sn = cmd_sn;
+ reply_data.data0 = RX_MAGIC0;
+ reply_data.data1 = RX_MAGIC1;
+
+ /* send reply data to remote (no blocking) */
+ ret = rpmsg_send(power_rpmsg->ept,
+ (void *)&reply_data, sizeof(reply_data));
+ if (ret)
+ dev_err(dev, "%s: failed to send msg to remote, ret=%d\n",
+ __func__, ret);
+
+ return ret;
+}
+
+static int apu_power_rx_probe(struct rpmsg_device *rpdev)
+{
+ struct device *dev = &rpdev->dev;
+ struct rpmsg_channel_info chinfo = {};
+ struct rpmsg_endpoint *ept;
+ struct apu_power_rpmsg *power_rpmsg;
+ struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
+ struct apu_power *apupwr = rx_to_apu_power(rpdrv);
+
+ power_rpmsg = devm_kzalloc(dev,
+ sizeof(struct apu_power_rpmsg), GFP_KERNEL);
+ if (!power_rpmsg)
+ return -ENOMEM;
+
+ strscpy(chinfo.name, rpdev->id.name, RPMSG_NAME_SIZE);
+ chinfo.src = rpdev->src;
+ chinfo.dst = RPMSG_ADDR_ANY;
+ ept = rpmsg_create_ept(rpdev, apu_power_rx_callback, NULL, chinfo);
+ if (!ept) {
+ dev_err(dev, "failed to create ept\n");
+ return -ENODEV;
+ }
+
+ init_completion(&power_rpmsg->comp);
+ mutex_init(&power_rpmsg->lock);
+ power_rpmsg->ept = ept;
+ power_rpmsg->rpdev = rpdev;
+ power_rpmsg->initialized = 1;
+ memset(&power_rpmsg->ipi_rply, 0x0,
+ sizeof(struct power_ipi_cmd_reply));
+ dev_set_drvdata(dev, power_rpmsg);
+ apupwr->rx_rpmsg_device = rpdev;
+
+ return 0;
+}
+
+static void apu_power_rx_remove(struct rpmsg_device *rpdev)
+{
+ struct apu_power_rpmsg *power_rpmsg = dev_get_drvdata(&rpdev->dev);
+ struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
+ struct apu_power *apupwr = rx_to_apu_power(rpdrv);
+
+ rpmsg_destroy_ept(power_rpmsg->ept);
+ apupwr->rx_rpmsg_device = NULL;
+}
+
+static int apu_power_tx_callback(struct rpmsg_device *rpdev, void *data,
+ int len, void *priv, u32 src)
+{
+ struct device *dev = &rpdev->dev;
+ struct apu_power_rpmsg *power_rpmsg = dev_get_drvdata(&rpdev->dev);
+
+ if (!len) {
+ dev_err(dev, "apu power rpmsg received empty rply");
+ complete(&power_rpmsg->comp);
+ return -EINVAL;
+ }
+
+ memcpy(&power_rpmsg->ipi_rply, data,
+ sizeof(struct power_ipi_cmd_reply));
+ complete(&power_rpmsg->comp);
+
+ return 0;
+}
+
+static int apu_power_tx_probe(struct rpmsg_device *rpdev)
+{
+ struct device *dev = &rpdev->dev;
+ struct rpmsg_channel_info chinfo = {};
+ struct rpmsg_endpoint *ept;
+ struct apu_power_rpmsg *power_rpmsg;
+ struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
+ struct apu_power *apupwr = tx_to_apu_power(rpdrv);
+
+ power_rpmsg = devm_kzalloc(dev,
+ sizeof(struct apu_power_rpmsg), GFP_KERNEL);
+ if (!power_rpmsg)
+ return -ENOMEM;
+
+ strscpy(chinfo.name, rpdev->id.name, RPMSG_NAME_SIZE);
+ chinfo.src = rpdev->src;
+ chinfo.dst = RPMSG_ADDR_ANY;
+ ept = rpmsg_create_ept(rpdev, apu_power_tx_callback, NULL, chinfo);
+ if (!ept) {
+ dev_err(dev, "failed to create ept\n");
+ return -ENODEV;
+ }
+
+ init_completion(&power_rpmsg->comp);
+ mutex_init(&power_rpmsg->lock);
+ power_rpmsg->ept = ept;
+ power_rpmsg->rpdev = rpdev;
+ power_rpmsg->initialized = 1;
+ memset(&power_rpmsg->ipi_rply, 0x0,
+ sizeof(struct power_ipi_cmd_reply));
+ dev_set_drvdata(dev, power_rpmsg);
+ apupwr->tx_rpmsg_device = rpdev;
+
+ return 0;
+}
+
+static void apu_power_tx_remove(struct rpmsg_device *rpdev)
+{
+ struct apu_power_rpmsg *power_rpmsg = dev_get_drvdata(&rpdev->dev);
+ struct rpmsg_driver *rpdrv = to_rpmsg_driver(rpdev->dev.driver);
+ struct apu_power *apupwr = tx_to_apu_power(rpdrv);
+
+ rpmsg_destroy_ept(power_rpmsg->ept);
+ apupwr->tx_rpmsg_device = NULL;
+}
+
+static const struct of_device_id apupwr_tx_rpmsg_of_match[] = {
+ { .compatible = "mediatek,apupwr-tx-rpmsg"},
+ {},
+};
+
+static const struct of_device_id apupwr_rx_rpmsg_of_match[] = {
+ { .compatible = "mediatek,apupwr-rx-rpmsg"},
+ {},
+};
+
+static struct rpmsg_driver pwr_tx_rpmsg_drv = {
+ .drv = {
+ .name = "apupwr-tx-rpmsg",
+ .owner = THIS_MODULE,
+ .of_match_table = apupwr_tx_rpmsg_of_match,
+ },
+ .probe = apu_power_tx_probe,
+ .remove = apu_power_tx_remove,
+};
+
+static struct rpmsg_driver pwr_rx_rpmsg_drv = {
+ .drv = {
+ .name = "apupwr-rx-rpmsg",
+ .owner = THIS_MODULE,
+ .of_match_table = apupwr_rx_rpmsg_of_match,
+ },
+ .probe = apu_power_rx_probe,
+ .remove = apu_power_rx_remove,
+};
+
+int apu_power_ipi_init(struct apu_power *apupwr)
+{
+ int ret = 0;
+
+ apupwr->tx_rpmsg_driver = pwr_tx_rpmsg_drv;
+ ret = register_rpmsg_driver(&apupwr->tx_rpmsg_driver);
+ if (ret)
+ return ret;
+
+ apupwr->rx_rpmsg_driver = pwr_rx_rpmsg_drv;
+ ret = register_rpmsg_driver(&apupwr->rx_rpmsg_driver);
+ if (ret)
+ goto err;
+
+ return 0;
+err:
+ unregister_rpmsg_driver(&apupwr->tx_rpmsg_driver);
+ return ret;
+}
+
+void apu_power_ipi_exit(struct apu_power *apupwr)
+{
+ unregister_rpmsg_driver(&apupwr->tx_rpmsg_driver);
+ unregister_rpmsg_driver(&apupwr->rx_rpmsg_driver);
+}
diff --git a/drivers/soc/mediatek/apusys/apu-pwr.c b/drivers/soc/mediatek/apusys/apu-pwr.c
new file mode 100644
index 000000000000..e8e54a767aff
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-pwr.c
@@ -0,0 +1,613 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include "apu-pwr.h"
+
+static const char *mt8192_apu_clks[CLK_NUM] = {
+ [CLK_TOP_DSP_SEL] = "clk_top_dsp_sel",
+ [CLK_TOP_DSP1_SEL] = "clk_top_dsp1_sel",
+ [CLK_TOP_DSP1_NPUPLL_SEL] = "clk_top_dsp1_npupll_sel",
+ [CLK_TOP_DSP2_SEL] = "clk_top_dsp2_sel",
+ [CLK_TOP_DSP2_NPUPLL_SEL] = "clk_top_dsp2_npupll_sel",
+ [CLK_TOP_DSP5_SEL] = "clk_top_dsp5_sel",
+ [CLK_TOP_DSP5_APUPLL_SEL] = "clk_top_dsp5_apupll_sel",
+ [CLK_TOP_IPU_IF_SEL] = "clk_top_ipu_if_sel",
+ [CLK_CLK26M] = "clk_top_clk26m",
+ [CLK_TOP_MAINPLL_D4_D2] = "clk_top_mainpll_d4_d2",
+ [CLK_TOP_UNIVPLL_D4_D2] = "clk_top_univpll_d4_d2",
+ [CLK_TOP_UNIVPLL_D6_D2] = "clk_top_univpll_d6_d2",
+ [CLK_TOP_MMPLL_D6] = "clk_top_mmpll_d6",
+ [CLK_TOP_MMPLL_D5] = "clk_top_mmpll_d5",
+ [CLK_TOP_MMPLL_D4] = "clk_top_mmpll_d4",
+ [CLK_TOP_UNIVPLL_D5] = "clk_top_univpll_d5",
+ [CLK_TOP_UNIVPLL_D4] = "clk_top_univpll_d4",
+ [CLK_TOP_UNIVPLL_D3] = "clk_top_univpll_d3",
+ [CLK_TOP_MAINPLL_D6] = "clk_top_mainpll_d6",
+ [CLK_TOP_MAINPLL_D4] = "clk_top_mainpll_d4",
+ [CLK_TOP_MAINPLL_D3] = "clk_top_mainpll_d3",
+ [CLK_TOP_TVDPLL] = "clk_top_tvdpll_ck",
+ [CLK_TOP_APUPLL] = "clk_top_apupll_ck",
+ [CLK_TOP_NPUPLL] = "clk_top_npupll_ck",
+ [CLK_APMIXED_APUPLL] = "clk_apmixed_apupll_rate",
+ [CLK_APMIXED_NPUPLL] = "clk_apmixed_npupll_rate",
+};
+
+static void apu_power_reg_init(struct device *dev)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ const struct apupwr_plat_reg *plat_regs;
+ void __iomem *spare_base;
+
+ spare_base = apupwr->spare_base;
+ plat_regs = apupwr->plat_data->plat_regs;
+
+ writel(0xffffffff, spare_base + plat_regs->opp_user);
+ writel(0xffffffff, spare_base + plat_regs->opp_curr);
+ writel(0xffffffff, spare_base + plat_regs->opp_thermal);
+}
+
+static int apu_power_regulator_init(struct device *dev)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret;
+
+ apupwr->vvpu_reg_id = devm_regulator_get_optional(dev, "vvpu");
+ if (IS_ERR(apupwr->vvpu_reg_id)) {
+ ret = PTR_ERR(apupwr->vvpu_reg_id);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get vvpu regulator");
+
+ return ret;
+ }
+
+ apupwr->vmdla_reg_id = devm_regulator_get_optional(dev, "vmdla");
+ if (IS_ERR(apupwr->vmdla_reg_id)) {
+ ret = PTR_ERR(apupwr->vmdla_reg_id);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to get vmdla regulator");
+
+ return ret;
+ }
+
+ ret = regulator_enable(apupwr->vvpu_reg_id);
+ if (ret)
+ return ret;
+
+ ret = regulator_enable(apupwr->vmdla_reg_id);
+ if (ret)
+ return ret;
+
+ return ret;
+}
+
+static void apu_power_regulator_exit(struct device *dev)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+
+ if (apupwr->vvpu_reg_id) {
+ if (regulator_disable(apupwr->vvpu_reg_id))
+ dev_err(apupwr->dev, "disable vvpu fail\n");
+ }
+
+ if (apupwr->vmdla_reg_id) {
+ if (regulator_disable(apupwr->vmdla_reg_id))
+ dev_err(apupwr->dev, "disable mdla fail\n");
+ }
+}
+
+static int mt8192_apu_clock_init(struct device *dev)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int i = 0;
+
+ apupwr->clk = devm_kcalloc(dev, CLK_NUM,
+ sizeof(*apupwr->clk), GFP_KERNEL);
+ if (!apupwr->clk)
+ return -ENOMEM;
+
+ for (i = 0; i < CLK_NUM; i++) {
+ apupwr->clk[i] = devm_clk_get(dev, mt8192_apu_clks[i]);
+ if (IS_ERR(apupwr->clk[i])) {
+ dev_warn(dev, "%s devm_clk_get %s fail\n",
+ __func__,
+ mt8192_apu_clks[i]);
+ apupwr->clk[i] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static int mt8192_enable_vpu_clksrc(struct apu_power *apupwr)
+{
+ int ret;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP1_SEL]);
+ if (ret)
+ goto dsp1_sel_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP2_SEL]);
+ if (ret)
+ goto dsp2_sel_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_NPUPLL]);
+ if (ret)
+ goto npupll_sel_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP1_NPUPLL_SEL]);
+ if (ret)
+ goto dsp1_npupll_sel_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP2_NPUPLL_SEL]);
+ if (ret)
+ goto dsp2_npupll_sel_err;
+
+ return 0;
+
+dsp2_npupll_sel_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP1_NPUPLL_SEL]);
+dsp1_npupll_sel_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_NPUPLL]);
+npupll_sel_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP2_SEL]);
+dsp2_sel_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP1_SEL]);
+dsp1_sel_err:
+ dev_err(apupwr->dev, "failed to enable vpu clk src\n");
+ return ret;
+}
+
+static int mt8192_enable_mdla_clksrc(struct apu_power *apupwr)
+{
+ int ret;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP5_SEL]);
+ if (ret)
+ goto dsp5_sel_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_APUPLL]);
+ if (ret)
+ goto apupll_err;
+
+ ret = clk_prepare_enable(apupwr->clk[CLK_TOP_DSP5_APUPLL_SEL]);
+ if (ret)
+ goto dsp5_apupll_sel_err;
+
+ return 0;
+
+dsp5_apupll_sel_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_APUPLL]);
+apupll_err:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP5_APUPLL_SEL]);
+dsp5_sel_err:
+ dev_err(apupwr->dev, "failed to enable mdla clk src\n");
+ return ret;
+}
+
+static int mt8192_apu_enable_dev_clksrc(struct device *dev, enum DVFS_USER user)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+
+ switch (user) {
+ case VPU0:
+ case VPU1:
+ ret = mt8192_enable_vpu_clksrc(apupwr);
+ break;
+ case MDLA0:
+ ret = mt8192_enable_mdla_clksrc(apupwr);
+ break;
+ default:
+ dev_err(dev, "%s illegal DVFS_USER: %d\n", __func__, user);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void mt8192_apu_disable_dev_clksrc(struct device *dev,
+ enum DVFS_USER user)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+
+ switch (user) {
+ case VPU0:
+ case VPU1:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP2_NPUPLL_SEL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP1_NPUPLL_SEL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_NPUPLL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP2_SEL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP1_SEL]);
+ break;
+ case MDLA0:
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP5_APUPLL_SEL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_APUPLL]);
+ clk_disable_unprepare(apupwr->clk[CLK_TOP_DSP5_SEL]);
+ break;
+ default:
+ dev_err(dev, "%s illegal DVFS_USER: %d\n", __func__, user);
+ }
+}
+
+static struct clk *find_clk_by_domain(struct device *dev,
+ enum DVFS_VOLTAGE_DOMAIN domain)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+
+ switch (domain) {
+ case V_APU_CONN:
+ return apupwr->clk[CLK_TOP_DSP_SEL];
+
+ case V_VPU0:
+ return apupwr->clk[CLK_TOP_DSP1_SEL];
+
+ case V_VPU1:
+ return apupwr->clk[CLK_TOP_DSP2_SEL];
+
+ case V_MDLA0:
+ return apupwr->clk[CLK_TOP_DSP5_SEL];
+
+ case V_VCORE:
+ return apupwr->clk[CLK_TOP_IPU_IF_SEL];
+
+ default:
+ dev_err(dev, "%s fail to find clk !\n", __func__);
+ return NULL;
+ }
+}
+
+static int mt8192_apu_set_clk_freq(struct device *dev,
+ enum DVFS_FREQ freq,
+ enum DVFS_VOLTAGE_DOMAIN domain)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+ struct clk *clk_src = NULL;
+ struct clk *clk_target = NULL;
+
+ switch (freq) {
+ case DVFS_FREQ_00_026000_F:
+ clk_src = apupwr->clk[CLK_CLK26M];
+ break;
+
+ case DVFS_FREQ_00_208000_F:
+ clk_src = apupwr->clk[CLK_TOP_UNIVPLL_D6_D2];
+ break;
+
+ case DVFS_FREQ_00_273000_F:
+ clk_src = apupwr->clk[CLK_TOP_MAINPLL_D4_D2];
+ break;
+
+ case DVFS_FREQ_00_312000_F:
+ clk_src = apupwr->clk[CLK_TOP_UNIVPLL_D4_D2];
+ break;
+
+ case DVFS_FREQ_00_499200_F:
+ clk_src = apupwr->clk[CLK_TOP_UNIVPLL_D5];
+ break;
+
+ case DVFS_FREQ_00_546000_F:
+ clk_src = apupwr->clk[CLK_TOP_MAINPLL_D4];
+ break;
+
+ case DVFS_FREQ_00_624000_F:
+ clk_src = apupwr->clk[CLK_TOP_UNIVPLL_D4];
+ break;
+
+ case DVFS_FREQ_00_687500_F:
+ clk_src = apupwr->clk[CLK_TOP_MMPLL_D4];
+ break;
+
+ case DVFS_FREQ_00_728000_F:
+ clk_src = apupwr->clk[CLK_TOP_MAINPLL_D3];
+ break;
+
+ case DVFS_FREQ_00_832000_F:
+ clk_src = apupwr->clk[CLK_TOP_UNIVPLL_D3];
+ break;
+
+ case DVFS_FREQ_NOT_SUPPORT:
+ default:
+ clk_src = apupwr->clk[CLK_CLK26M];
+ dev_warn(dev, "%s wrong freq : %d, force assign 26M\n",
+ __func__, freq);
+ }
+
+ clk_target = find_clk_by_domain(dev, domain);
+ if (clk_target) {
+ ret = clk_set_parent(clk_target, clk_src);
+ if (ret) {
+ dev_err(dev, "%s fail p1 fail\n", __func__);
+ return ret;
+ }
+ switch (domain) {
+ case V_VPU0:
+ clk_target = apupwr->clk[CLK_TOP_DSP1_NPUPLL_SEL];
+ clk_src = apupwr->clk[CLK_TOP_DSP1_SEL];
+ break;
+
+ case V_VPU1:
+ clk_target = apupwr->clk[CLK_TOP_DSP2_NPUPLL_SEL];
+ clk_src = apupwr->clk[CLK_TOP_DSP2_SEL];
+ break;
+
+ case V_MDLA0:
+ clk_target = apupwr->clk[CLK_TOP_DSP5_APUPLL_SEL];
+ clk_src = apupwr->clk[CLK_TOP_DSP5_SEL];
+ break;
+
+ default:
+ break;
+ }
+ ret = clk_set_parent(clk_target, clk_src);
+ if (ret) {
+ dev_err(dev, "%s fail p2 fail\n", __func__);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+static int apu_clock_init(struct device *dev)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (!apupwr->plat_data->ops)
+ return ret;
+
+ if (apupwr->plat_data->ops->clock_init)
+ ret = apupwr->plat_data->ops->clock_init(dev);
+
+ return ret;
+}
+
+int apu_enable_dev_clksrc(struct device *dev, enum DVFS_USER user)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (!apupwr->plat_data->ops)
+ return ret;
+
+ if (apupwr->plat_data->ops->enable_dev_clksrc)
+ ret = apupwr->plat_data->ops->enable_dev_clksrc(dev, user);
+
+ return ret;
+}
+
+void apu_disable_dev_clksrc(struct device *dev, enum DVFS_USER user)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+
+ if (!apupwr->plat_data->ops)
+ return;
+
+ if (apupwr->plat_data->ops->disable_dev_clksrc)
+ apupwr->plat_data->ops->disable_dev_clksrc(dev, user);
+}
+
+int apu_set_clk_freq(struct device *dev,
+ enum DVFS_FREQ freq,
+ enum DVFS_VOLTAGE_DOMAIN domain)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (!apupwr->plat_data->ops)
+ return ret;
+
+ if (apupwr->plat_data->ops->set_clk_freq)
+ ret = apupwr->plat_data->ops->set_clk_freq(dev,
+ freq, domain);
+
+ return ret;
+}
+
+void apu_update_fixed_opp_by_reg(struct device *dev,
+ u32 opp_limit_stat)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ const struct apupwr_plat_reg *plat_regs;
+ void __iomem *spare_base;
+
+ spare_base = apupwr->spare_base;
+ plat_regs = apupwr->plat_data->plat_regs;
+ writel(opp_limit_stat, spare_base + plat_regs->opp_user);
+}
+
+void apu_check_curr_opp_by_reg(struct device *dev,
+ enum DVFS_USER specify_usr)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ const struct apupwr_plat_reg *plat_regs;
+ void __iomem *spare_base;
+ u32 curr_opp_stat;
+
+ spare_base = apupwr->spare_base;
+ plat_regs = apupwr->plat_data->plat_regs;
+
+ curr_opp_stat = readl(spare_base + plat_regs->opp_curr);
+ dev_info(dev, "%s user:%d curr opp:%d\n",
+ __func__, specify_usr, curr_opp_stat);
+}
+
+void apu_update_thermal_opp_by_reg(struct device *dev,
+ enum DVFS_USER user, int therm_opp)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ const struct apupwr_plat_reg *plat_regs;
+ void __iomem *spare_base;
+ u32 curr_therm_stat;
+
+ spare_base = apupwr->spare_base;
+ plat_regs = apupwr->plat_data->plat_regs;
+
+ curr_therm_stat = readl(spare_base + plat_regs->opp_thermal);
+ curr_therm_stat &= ~(0xf << user);
+ curr_therm_stat |= ((therm_opp & 0xf) << user);
+
+ writel(curr_therm_stat, spare_base + plat_regs->opp_thermal);
+}
+
+int apu_config_vcore_volt(struct device *dev, enum DVFS_VOLTAGE volt)
+{
+ struct apu_power *apupwr = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (apupwr->plat_data->ops->set_vcore)
+ ret = apupwr->plat_data->ops->set_vcore(dev, volt);
+
+ return ret;
+}
+
+static int apu_power_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct apu_power *apupwr;
+ struct resource *res;
+ int ret = 0;
+
+ apupwr = devm_kzalloc(dev, sizeof(struct apu_power), GFP_KERNEL);
+ if (!apupwr)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, apupwr);
+
+ apupwr->dev = &pdev->dev;
+ apupwr->plat_data = device_get_match_data(dev);
+ res = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM, "apu_spare");
+ apupwr->spare_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(apupwr->spare_base)) {
+ dev_err(dev, "Unable to ioremap spare_base\n");
+ apupwr->spare_base = NULL;
+ return PTR_ERR(apupwr->spare_base);
+ }
+
+ /* prepare registers */
+ apu_power_reg_init(dev);
+
+ /* prepare regulators */
+ ret = apu_power_regulator_init(dev);
+ if (ret)
+ goto err_regulator;
+
+ /* prepare clocks */
+ ret = apu_clock_init(dev);
+ if (ret)
+ goto err_regulator;
+
+ /* debugfs */
+ apupwr->dbg_root = NULL;
+ apu_power_debugfs_init(apupwr);
+
+ /* init remote ipi channel */
+ ret = apu_power_ipi_init(apupwr);
+ if (ret) {
+ dev_err(dev, "failed to rpmsg channel\n");
+ goto err_exit;
+ }
+
+ ret = devm_of_platform_populate(&pdev->dev);
+ if (ret < 0)
+ dev_err(&pdev->dev, "Fail to populate child nodes: %d\n", ret);
+
+ pm_runtime_enable(dev);
+
+ return 0;
+
+err_exit:
+ apu_power_ipi_exit(apupwr);
+ apu_power_debugfs_exit();
+err_regulator:
+ apu_power_regulator_exit(dev);
+
+ return ret;
+}
+
+static int apu_power_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct apu_power *apupwr = platform_get_drvdata(pdev);
+
+ if (!apupwr)
+ return -ENODEV;
+
+ pm_runtime_disable(dev);
+ apu_power_ipi_exit(apupwr);
+ apu_power_debugfs_exit();
+ apu_power_regulator_exit(dev);
+ return 0;
+}
+
+static const struct apupwr_plat_reg mt8192_pwr_reg = {
+ .opp_user = 0x40,
+ .opp_thermal = 0x44,
+ .opp_curr = 0x48,
+ .opp_mask = 0xF,
+};
+
+static struct apupwr_plat_ops mt8192_pwr_ops = {
+ .clock_init = mt8192_apu_clock_init,
+ .enable_dev_clksrc = mt8192_apu_enable_dev_clksrc,
+ .disable_dev_clksrc = mt8192_apu_disable_dev_clksrc,
+ .set_clk_freq = mt8192_apu_set_clk_freq,
+ .set_vcore = NULL,
+};
+
+static struct apupwr_plat_data mt8192_apu_power_data = {
+ .dvfs_user = MDLA0,
+ .plat_regs = &mt8192_pwr_reg,
+ .ops = &mt8192_pwr_ops,
+};
+
+static const struct of_device_id apu_power_of_match[] = {
+ {
+ .compatible = "mediatek,mt8192-apu-power",
+ .data = &mt8192_apu_power_data
+ }, {
+ /* Terminator */
+ },
+};
+MODULE_DEVICE_TABLE(of, apu_power_of_match);
+
+static struct platform_driver apu_power_driver = {
+ .probe = apu_power_probe,
+ .remove = apu_power_remove,
+ .driver = {
+ .name = "apusys_power",
+ .of_match_table = of_match_ptr(apu_power_of_match),
+ },
+};
+
+static int __init apu_power_drv_init(void)
+{
+ return platform_driver_register(&apu_power_driver);
+}
+
+static void __exit apu_power_drv_exit(void)
+{
+ platform_driver_unregister(&apu_power_driver);
+}
+
+module_init(apu_power_drv_init);
+module_exit(apu_power_drv_exit);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("apu power driver");
diff --git a/drivers/soc/mediatek/apusys/apu-pwr.h b/drivers/soc/mediatek/apusys/apu-pwr.h
new file mode 100644
index 000000000000..4b6d90d5f206
--- /dev/null
+++ b/drivers/soc/mediatek/apusys/apu-pwr.h
@@ -0,0 +1,260 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef APU_PWR_H
+#define APU_PWR_H
+
+#include <linux/platform_device.h>
+#include <linux/rpmsg.h>
+
+enum DVFS_USER {
+ VPU0 = 0,
+ VPU1,
+ MDLA0,
+ MDLA1,
+ APUSYS_DVFS_USER_NUM,
+};
+
+enum DVFS_VOLTAGE_DOMAIN {
+ V_VPU0 = 0,
+ V_VPU1,
+ V_MDLA0,
+ V_APU_CONN,
+ V_VCORE,
+ APUSYS_BUCK_DOMAIN_NUM,
+};
+
+enum DVFS_USER_TYPE {
+ TYPE_VPU,
+ TYPE_MDLA,
+ DVFS_USER_TYPE_NUM,
+ TYPE_UNKNOWN,
+};
+
+/* mt8192 apu clocks*/
+enum {
+ CLK_TOP_DSP_SEL = 0,
+ CLK_TOP_DSP1_SEL,
+ CLK_TOP_DSP1_NPUPLL_SEL,
+ CLK_TOP_DSP2_SEL,
+ CLK_TOP_DSP2_NPUPLL_SEL,
+ CLK_TOP_DSP5_SEL,
+ CLK_TOP_DSP5_APUPLL_SEL,
+ CLK_TOP_IPU_IF_SEL,
+ CLK_CLK26M,
+ CLK_TOP_MAINPLL_D4_D2,
+ CLK_TOP_UNIVPLL_D4_D2,
+ CLK_TOP_UNIVPLL_D6_D2,
+ CLK_TOP_MMPLL_D6,
+ CLK_TOP_MMPLL_D5,
+ CLK_TOP_MMPLL_D4,
+ CLK_TOP_UNIVPLL_D5,
+ CLK_TOP_UNIVPLL_D4,
+ CLK_TOP_UNIVPLL_D3,
+ CLK_TOP_MAINPLL_D6,
+ CLK_TOP_MAINPLL_D4,
+ CLK_TOP_MAINPLL_D3,
+ CLK_TOP_TVDPLL,
+ CLK_TOP_APUPLL,
+ CLK_TOP_NPUPLL,
+ CLK_APMIXED_APUPLL,
+ CLK_APMIXED_NPUPLL,
+ CLK_NUM
+};
+
+enum DVFS_VOLTAGE {
+ DVFS_VOLT_NOT_SUPPORT = 0,
+ DVFS_VOLT_00_550000_V = 550000,
+ DVFS_VOLT_00_575000_V = 575000,
+ DVFS_VOLT_00_600000_V = 600000,
+ DVFS_VOLT_00_650000_V = 650000,
+ DVFS_VOLT_00_700000_V = 700000,
+ DVFS_VOLT_00_725000_V = 725000,
+ DVFS_VOLT_00_750000_V = 750000,
+ DVFS_VOLT_00_775000_V = 775000,
+ DVFS_VOLT_00_800000_V = 800000,
+ DVFS_VOLT_00_825000_V = 825000,
+ DVFS_VOLT_MAX = 825000 + 1,
+};
+
+enum DVFS_FREQ {
+ DVFS_FREQ_NOT_SUPPORT = 0,
+ DVFS_FREQ_00_026000_F = 26000,
+ DVFS_FREQ_00_208000_F = 208000,
+ DVFS_FREQ_00_273000_F = 273000,
+ DVFS_FREQ_00_312000_F = 312000,
+ DVFS_FREQ_00_499200_F = 499200,
+ DVFS_FREQ_00_525000_F = 525000,
+ DVFS_FREQ_00_546000_F = 546000,
+ DVFS_FREQ_00_594000_F = 594000,
+ DVFS_FREQ_00_624000_F = 624000,
+ DVFS_FREQ_00_688000_F = 688000,
+ DVFS_FREQ_00_687500_F = 687500,
+ DVFS_FREQ_00_728000_F = 728000,
+ DVFS_FREQ_00_800000_F = 800000,
+ DVFS_FREQ_00_832000_F = 832000,
+ DVFS_FREQ_00_960000_F = 960000,
+ DVFS_FREQ_00_1100000_F = 1100000,
+ DVFS_FREQ_MAX,
+};
+
+enum APU_POWER_PARAM {
+ POWER_PARAM_FIX_OPP,
+ POWER_PARAM_DVFS_DEBUG,
+ POWER_PARAM_GET_POWER_REG,
+ POWER_PARAM_POWER_STRESS,
+ POWER_PARAM_OPP_TABLE,
+ POWER_PARAM_CURR_STATUS,
+ POWER_PARAM_LOG_LEVEL,
+ POWER_PARAM_ULOG_LEVEL,
+};
+
+struct apu_dev_power_data {
+ int dev_type;
+ int dev_core;
+ void *pdata;
+};
+
+struct apupwr_plat_reg {
+ u32 opp_user;
+ u32 opp_thermal;
+ u32 opp_curr;
+ u32 opp_mask;
+};
+
+struct apupwr_plat_ops {
+ int (*clock_init)(struct device *dev);
+ int (*enable_dev_clksrc)(struct device *dev, enum DVFS_USER user);
+ void (*disable_dev_clksrc)(struct device *dev, enum DVFS_USER user);
+ int (*set_clk_freq)(struct device *dev, enum DVFS_FREQ freq,
+ enum DVFS_VOLTAGE_DOMAIN domain);
+ int (*set_vcore)(struct device *dev, enum DVFS_VOLTAGE volt);
+};
+
+struct apupwr_plat_data {
+ u32 flags;
+ int dvfs_user;
+ const struct apupwr_plat_reg *plat_regs;
+ const struct apupwr_plat_ops *ops;
+};
+
+struct apu_power {
+ struct device *dev;
+ void __iomem *spare_base;
+ const struct apupwr_plat_data *plat_data;
+ struct clk **clk;
+ struct regulator *vvpu_reg_id;
+ struct regulator *vmdla_reg_id;
+
+ /* rpmsg device for power ipi */
+ struct rpmsg_driver tx_rpmsg_driver;
+ struct rpmsg_device *tx_rpmsg_device;
+ struct rpmsg_driver rx_rpmsg_driver;
+ struct rpmsg_device *rx_rpmsg_device;
+
+ /*debug*/
+ struct dentry *dbg_root;
+ u32 dbg_option;
+ u32 ulog_level;
+};
+
+/* request send from AP to uP */
+enum request_id_AP {
+ DVFS_STAT_UPDATE = 0,
+ OPP_LIMIT_THERM,
+ OPP_LIMIT_FIX_OPP,
+ OPP_LIMIT_DVFS_DEBUG,
+ CHANGE_LOG_LEVEL,
+ STRESS_TEST,
+};
+
+/* request send from uP to AP */
+enum request_id_uP {
+ CHANGE_DEV_CLKSRC = 0,
+ CHANGE_DEV_CLOCK,
+ CHANGE_SYS_VCORE,
+ SYNC_STAT_UP_POWER,
+ SYNC_STAT_DEV_POWER,
+ DUMP_POWER_INFO,
+};
+
+/* power cmd format (from AP to uP) */
+struct power_cmd_AP {
+ u32 req_id:4,
+ reserved0:4,
+ reserved1:4,
+ reserved2:4,
+ reserved3:4,
+ reserved4:4,
+ reserved5:4,
+ need_handle_ack:4;
+};
+
+/* ipi cmd format (from AP to uP) */
+struct power_ipi_cmd_AP {
+ u32 cmd_sn;
+ struct power_cmd_AP pwr_cmd;
+ u32 data0;
+ u32 data1;
+};
+
+/*power cmd format (from uP to AP) */
+struct power_cmd_uP {
+ u32 req_id:4,
+ dev_id:4,
+ target_opp:4,
+ reserved0:4,
+ reserved1:4,
+ reserved2:4,
+ reserved3:4,
+ need_handle_ack:4;
+};
+
+/* ipi cmd format (from uP to AP) */
+struct power_ipi_cmd_uP {
+ u32 cmd_sn;
+ struct power_cmd_uP pwr_cmd;
+ u32 data0;
+ u32 data1;
+};
+
+/* reply to remote that we are completed */
+struct power_ipi_cmd_reply {
+ u32 cmd_sn;
+ u32 data0;
+ u32 data1;
+ u32 reserved3[61];
+};
+
+int apu_enable_dev_clksrc(struct device *dev, enum DVFS_USER);
+void apu_disable_dev_clksrc(struct device *dev, enum DVFS_USER);
+int apu_set_clk_freq(struct device *dev,
+ enum DVFS_FREQ freq,
+ enum DVFS_VOLTAGE_DOMAIN domain);
+
+void apu_update_fixed_opp_by_reg(struct device *dev,
+ u32 opp_limit_stat);
+void apu_check_curr_opp_by_reg(struct device *dev,
+ enum DVFS_USER specify_usr);
+void apu_update_thermal_opp_by_reg(struct device *dev,
+ enum DVFS_USER user, int therm_opp);
+
+int apu_config_vcore_volt(struct device *dev, enum DVFS_VOLTAGE volt);
+
+int apu_power_ipi_init(struct apu_power *apupwr);
+void apu_power_ipi_exit(struct apu_power *apupwr);
+void apu_power_set_ulog_level(struct apu_power *apupwr,
+ int level);
+void apu_power_notify_uP_opp_limit(struct apu_power *apu_power,
+ enum request_id_AP req);
+
+#if IS_ENABLED(CONFIG_MTK_APU_DEBUG)
+void apu_power_debugfs_init(struct apu_power *apupwr);
+void apu_power_debugfs_exit(void);
+#else
+static inline void apu_power_debugfs_init(struct apu_power *apupwr) { }
+static inline void apu_power_debugfs_exit(void) { }
+#endif
+#endif
--
2.18.0
More information about the dri-devel
mailing list