[PATCH v2 12/14] drm/vc4: hdmi: Take bpp into account for the scrambler
Maxime Ripard
maxime at cerno.tech
Wed Dec 15 12:44:04 UTC 2021
The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.
Let's leverage the new function to compute the clock rate in the
scrambler setup code.
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++----
drivers/gpu/drm/vc4/vc4_hdmi.h | 5 +++++
2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index effc2d42e320..be640b8be58c 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -99,9 +99,17 @@
#define HDMI_14_MAX_TMDS_CLK (340 * 1000 * 1000)
-static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
+
+static unsigned long long
+vc4_hdmi_encoder_compute_mode_clock(const struct drm_display_mode *mode,
+ unsigned int bpc);
+
+static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode,
+ unsigned int bpc)
{
- return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK;
+ unsigned long long clock = vc4_hdmi_encoder_compute_mode_clock(mode, bpc);
+
+ return clock > HDMI_14_MAX_TMDS_CLK;
}
static bool vc4_hdmi_is_full_range_rgb(struct vc4_hdmi *vc4_hdmi,
@@ -272,7 +280,7 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
struct drm_display_mode *mode;
list_for_each_entry(mode, &connector->probed_modes, head) {
- if (vc4_hdmi_mode_needs_scrambling(mode)) {
+ if (vc4_hdmi_mode_needs_scrambling(mode, 8)) {
drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
}
@@ -613,7 +621,7 @@ static void vc4_hdmi_enable_scrambling(struct drm_encoder *encoder)
if (!vc4_hdmi_supports_scrambling(encoder, mode))
return;
- if (!vc4_hdmi_mode_needs_scrambling(mode))
+ if (!vc4_hdmi_mode_needs_scrambling(mode, vc4_hdmi->output_bpc))
return;
drm_scdc_set_high_tmds_clock_ratio(vc4_hdmi->ddc, true);
@@ -1256,6 +1264,7 @@ static void vc4_hdmi_encoder_atomic_mode_set(struct drm_encoder *encoder,
struct vc4_hdmi *vc4_hdmi = encoder_to_vc4_hdmi(encoder);
mutex_lock(&vc4_hdmi->mutex);
+ vc4_hdmi->output_bpc = conn_state->max_bpc;
memcpy(&vc4_hdmi->saved_adjusted_mode,
&crtc_state->adjusted_mode,
sizeof(vc4_hdmi->saved_adjusted_mode));
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 2b6aaafc020a..31b7d27deb8e 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -216,6 +216,11 @@ struct vc4_hdmi {
* the scrambler on? Protected by @mutex.
*/
bool scdc_enabled;
+
+ /**
+ * @output_bpc: BPC currently being used. Protected by @mutex.
+ */
+ unsigned int output_bpc;
};
static inline struct vc4_hdmi *
--
2.33.1
More information about the dri-devel
mailing list