[Intel-gfx] [PATCH 4/4] drm/i915: Improve long running OCL w/a for GuC submission
Daniele Ceraolo Spurio
daniele.ceraolospurio at intel.com
Thu Dec 16 01:11:26 UTC 2021
On 12/10/2021 10:58 PM, John.C.Harrison at Intel.com wrote:
> From: John Harrison <John.C.Harrison at Intel.com>
>
> A workaround was added to the driver to allow OpenCL workloads to run
> 'forever' by disabling pre-emption on the RCS engine for Gen12.
> It is not totally unbound as the heartbeat will kick in eventually
> and cause a reset of the hung engine.
>
> However, this does not work well in GuC submission mode. In GuC mode,
> the pre-emption timeout is how GuC detects hung contexts and triggers
> a per engine reset. Thus, disabling the timeout means also losing all
> per engine reset ability. A full GT reset will still occur when the
> heartbeat finally expires, but that is a much more destructive and
> undesirable mechanism.
>
> The purpose of the workaround is actually to give OpenCL tasks longer
> to reach a pre-emption point after a pre-emption request has been
> issued. This is necessary because Gen12 does not support mid-thread
> pre-emption and OpenCL can have long running threads.
>
> So, rather than disabling the timeout completely, just set it to a
> 'long' value. Likewise, bump the heartbeat interval. That gives the
> OpenCL thread sufficient time to reach a pre-emption point without
> being killed off either by the GuC or by the heartbeat.
>
> Signed-off-by: John Harrison <John.C.Harrison at Intel.com>
On the approach and the code:
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio at intel.com>
Please get an ack from the interested parties on the actual numbers used
for the timeouts (they look big enough to me, but I'm not familiar with
the compute use-case).
Daniele
> ---
> drivers/gpu/drm/i915/gt/intel_engine_cs.c | 42 +++++++++++++++++++++--
> 1 file changed, 39 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/intel_engine_cs.c b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
> index 352254e001b4..26af8d60fe2b 100644
> --- a/drivers/gpu/drm/i915/gt/intel_engine_cs.c
> +++ b/drivers/gpu/drm/i915/gt/intel_engine_cs.c
> @@ -382,9 +382,45 @@ static int intel_engine_setup(struct intel_gt *gt, enum intel_engine_id id,
> engine->props.timeslice_duration_ms =
> CONFIG_DRM_I915_TIMESLICE_DURATION;
>
> - /* Override to uninterruptible for OpenCL workloads. */
> - if (GRAPHICS_VER(i915) == 12 && engine->class == RENDER_CLASS)
> - engine->props.preempt_timeout_ms = 0;
> + /*
> + * Mid-thread pre-emption is not available in Gen12. Unfortunately,
> + * some OpenCL workloads run quite long threads. That means they get
> + * reset due to not pre-empting in a timely manner.
> + * The execlist solution was to disable pre-emption completely.
> + * However, pre-emption timeouts are the way GuC detects hung contexts
> + * and triggers engine resets. Thus, without pre-emption, there is no
> + * per engine reset. And full GT reset is much more intrusive. So keep
> + * the timeout for GuC submission platforms and just bump it to be
> + * much larger. Also bump the heartbeat timeout to match, otherwise
> + * the heartbeat can expire before the pre-emption can timeout and
> + * thus trigger a full GT reset anyway.
> + */
> + if (GRAPHICS_VER(i915) == 12 && engine->class == RENDER_CLASS) {
> + if (intel_uc_wants_guc_submission(>->uc)) {
> + const unsigned long min_preempt = 7500;
> + const unsigned long min_beat = 5000;
> +
> + if (engine->props.preempt_timeout_ms &&
> + engine->props.preempt_timeout_ms < min_preempt) {
> + drm_info(>->i915->drm, "Bumping pre-emption timeout from %ld to %ld on %s to allow slow compute pre-emption\n",
> + engine->props.preempt_timeout_ms,
> + min_preempt, engine->name);
> +
> + engine->props.preempt_timeout_ms = min_preempt;
> + }
> +
> + if (engine->props.heartbeat_interval_ms &&
> + engine->props.heartbeat_interval_ms < min_beat) {
> + drm_info(>->i915->drm, "Bumping heartbeat interval from %ld to %ld on %s to allow slow compute pre-emption\n",
> + engine->props.heartbeat_interval_ms,
> + min_beat, engine->name);
> +
> + engine->props.heartbeat_interval_ms = min_beat;
> + }
> + } else {
> + engine->props.preempt_timeout_ms = 0;
> + }
> + }
>
> engine->defaults = engine->props; /* never to change again */
>
More information about the dri-devel
mailing list