[PATCH] drm: adv7511: override i2c address of cec before accessing it

Antonio Borneo antonio.borneo at foss.st.com
Sat Dec 18 18:28:04 UTC 2021


Commit 680532c50bca ("drm: adv7511: Add support for
i2c_new_secondary_device") allows a device tree node to override
the default addresses of the secondary i2c devices. This is useful
for solving address conflicts on the i2c bus.

In adv7511_init_cec_regmap() the new i2c address of cec device is
read from device tree and immediately accessed, well before it is
written in the proper register to override the default address.
This can cause an i2c error during probe and a consequent probe
failure.

Once the new i2c address is read from the device tree, override
the default address before any attempt to access the cec.

Tested with adv7533 and stm32mp157f.

Signed-off-by: Antonio Borneo <antonio.borneo at foss.st.com>
Fixes: 680532c50bca ("drm: adv7511: Add support for i2c_new_secondary_device")
---
To: Andrzej Hajda <a.hajda at samsung.com>
To: Neil Armstrong <narmstrong at baylibre.com>
To: Robert Foss <robert.foss at linaro.org>
To: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
To: Jonas Karlman <jonas at kwiboo.se>
To: Jernej Skrabec <jernej.skrabec at gmail.com>
To: David Airlie <airlied at linux.ie>
To: Daniel Vetter <daniel at ffwll.ch>
To: Kieran Bingham <kieran.bingham+renesas at ideasonboard.com>
To: dri-devel at lists.freedesktop.org
Cc: linux-kernel at vger.kernel.org
Cc: linux-stm32 at st-md-mailman.stormreply.com
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 76555ae64e9c..629e05286fd9 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1048,6 +1048,10 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
 						ADV7511_CEC_I2C_ADDR_DEFAULT);
 	if (IS_ERR(adv->i2c_cec))
 		return PTR_ERR(adv->i2c_cec);
+
+	regmap_write(adv->regmap, ADV7511_REG_CEC_I2C_ADDR,
+		     adv->i2c_cec->addr << 1);
+
 	i2c_set_clientdata(adv->i2c_cec, adv);
 
 	adv->regmap_cec = devm_regmap_init_i2c(adv->i2c_cec,
@@ -1252,9 +1256,6 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
 	if (ret)
 		goto err_i2c_unregister_packet;
 
-	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
-		     adv7511->i2c_cec->addr << 1);
-
 	INIT_WORK(&adv7511->hpd_work, adv7511_hpd_work);
 
 	if (i2c->irq) {

base-commit: fc74881c28d314b10efac016ef49df4ff40b8b97
-- 
2.34.1



More information about the dri-devel mailing list