[PATCH 3/5] drm/msm/dsi_pll_10nm: Fix bad VCO rate calculation and prescaler

Rob Clark robdclark at gmail.com
Mon Feb 1 17:31:42 UTC 2021


On Mon, Feb 1, 2021 at 9:18 AM Rob Clark <robdclark at gmail.com> wrote:
>
> On Mon, Feb 1, 2021 at 9:05 AM Rob Clark <robdclark at gmail.com> wrote:
> >
> > On Mon, Feb 1, 2021 at 7:47 AM Rob Clark <robdclark at gmail.com> wrote:
> > >
> > > On Mon, Feb 1, 2021 at 2:11 AM AngeloGioacchino Del Regno
> > > <angelogioacchino.delregno at somainline.org> wrote:
> > > >
> > > > Il 31/01/21 20:50, Rob Clark ha scritto:
> > > > > On Sat, Jan 9, 2021 at 5:51 AM AngeloGioacchino Del Regno
> > > > > <angelogioacchino.delregno at somainline.org> wrote:
> > > > >>
> > > > >> The VCO rate was being miscalculated due to a big overlook during
> > > > >> the process of porting this driver from downstream to upstream:
> > > > >> here we are really recalculating the rate of the VCO by reading
> > > > >> the appropriate registers and returning a real frequency, while
> > > > >> downstream the driver was doing something entirely different.
> > > > >>
> > > > >> In our case here, the recalculated rate was wrong, as it was then
> > > > >> given back to the set_rate function, which was erroneously doing
> > > > >> a division on the fractional value, based on the prescaler being
> > > > >> either enabled or disabled: this was actually producing a bug for
> > > > >> which the final VCO rate was being doubled, causing very obvious
> > > > >> issues when trying to drive a DSI panel because the actual divider
> > > > >> value was multiplied by two!
> > > > >>
> > > > >> To make things work properly, remove the multiplication of the
> > > > >> reference clock by two from function dsi_pll_calc_dec_frac and
> > > > >> account for the prescaler enablement in the vco_recalc_rate (if
> > > > >> the prescaler is enabled, then the hardware will divide the rate
> > > > >> by two).
> > > > >>
> > > > >> This will make the vco_recalc_rate function to pass the right
> > > > >> frequency to the (clock framework) set_rate function when called,
> > > > >> which will - in turn - program the right values in both the
> > > > >> DECIMAL_DIV_START_1 and the FRAC_DIV_START_{LOW/MID/HIGH}_1
> > > > >> registers, finally making the PLL to output the right clock.
> > > > >>
> > > > >> Also, while at it, remove the prescaler TODO by also adding the
> > > > >> possibility of disabling the prescaler on the PLL (it is in the
> > > > >> PLL_ANALOG_CONTROLS_ONE register).
> > > > >> Of course, both prescaler-ON and OFF cases were tested.
> > > > >
> > > > > This somehow breaks things on sc7180 (display gets stuck at first
> > > > > frame of splash screen).  (This is a setup w/ an ti-sn65dsi86 dsi->eDP
> > > > > bridge)
> > > > >
> > > >
> > > > First frame of the splash means that something is "a bit" wrong...
> > > > ...like the DSI clock is a little off.
> > > >
> > > > I don't have such hardware, otherwise I would've tried... but what you
> > > > describe is a bit strange.
> > > > Is there any other older qcom platform using this chip? Any other
> > > > non-qcom platform? Is the driver for the SN65DSI86 surely fine?
> > > > Anyway, as you know, I would never propose untested patches nor
> > > > partially working ones for any reason: I'm sorry that this happened.
> > >
> > > I don't think there is anything publicly avail w/ sc7180 (yet.. but very soon)
> > >
> > > The ti-sn65dsi86 bridge is used on a bunch of 845/850 devices (like
> > > the snapdragon windows laptops).. and I think also the older 835
> > > laptops.. ofc that doesn't mean that there isn't some bug, but I'd
> > > guess maybe more likely that there is some small difference in DSI vs
> > > older devices, or some cmd vs video mode difference.
> > >
> > > Anyways, seems like the screen did eventually recover so that gives me
> > > a bit of confidence to bisect this series, which I'll do a bit later
> > > today.
> >
> > fwiw, this series minus this patch, and everything looks ok.. let me
> > take a closer look at what changes with this patch
>
> Btw, it looks like upstream, config->disable_prescaler is always
> false.. I don't suppose you have anything WIP that changes this?

fwiw, this is the clk_summary diff with and without this patch:

------------------
270,282c270,282
<     dsi0_pll_out_div_clk              1        1        0
887039941          0     0  50000         Y
<        dsi0_pll_post_out_div_clk       0        0        0
221759985          0     0  50000         Y
<        dsi0_pll_bit_clk               2        2        0
887039941          0     0  50000         Y
<           dsi0_pclk_mux               1        1        0
887039941          0     0  50000         Y
<              dsi0_phy_pll_out_dsiclk       1        1        0
147839991          0     0  50000         Y
<                 disp_cc_mdss_pclk0_clk_src       1        1        0
  147839991          0     0  50000         Y
<                    disp_cc_mdss_pclk0_clk       1        1        0
 147839991          0     0  50000         Y
<           dsi0_pll_by_2_bit_clk       0        0        0
443519970          0     0  50000         Y
<           dsi0_phy_pll_out_byteclk       1        1        0
110879992          0     0  50000         Y
<              disp_cc_mdss_byte0_clk_src       2        2        0
110879992          0     0  50000         Y
<                 disp_cc_mdss_byte0_div_clk_src       1        1
  0    55439996          0     0  50000         Y
<                    disp_cc_mdss_byte0_intf_clk       1        1
  0    55439996          0     0  50000         Y
<                 disp_cc_mdss_byte0_clk       1        1        0
110879992          0     0  50000         Y
---
>     dsi0_pll_out_div_clk              1        1        0   887039978          0     0  50000         Y
>        dsi0_pll_post_out_div_clk       0        0        0   221759994          0     0  50000         Y
>        dsi0_pll_bit_clk               2        2        0   887039978          0     0  50000         Y
>           dsi0_pclk_mux               1        1        0   887039978          0     0  50000         Y
>              dsi0_phy_pll_out_dsiclk       1        1        0   147839997          0     0  50000         Y
>                 disp_cc_mdss_pclk0_clk_src       1        1        0   147839997          0     0  50000         Y
>                    disp_cc_mdss_pclk0_clk       1        1        0   147839997          0     0  50000         Y
>           dsi0_pll_by_2_bit_clk       0        0        0   443519989          0     0  50000         Y
>           dsi0_phy_pll_out_byteclk       1        1        0   110879997          0     0  50000         Y
>              disp_cc_mdss_byte0_clk_src       2        2        0   110879997          0     0  50000         Y
>                 disp_cc_mdss_byte0_div_clk_src       1        1        0    55439999          0     0  50000         Y
>                    disp_cc_mdss_byte0_intf_clk       1        1        0    55439999          0     0  50000         Y
>                 disp_cc_mdss_byte0_clk       1        1        0   110879997          0     0  50000         Y
------------------


> >
> > > > In any case, just to be perfectly transparent, while being here waiting
> > > > for review, this patch series got tested on more smartphones, even ones
> > > > that I don't personally own, with different displays.
> > > >
> > > > For your reference, here's a list (all MSM8998..):
> > > > - OnePlus 5               (1920x1080)
> > > > - F(x)Tec Pro 1           (2160x1080)
> > > > - Sony Xperia XZ1 Compact (1280x720)
> > > > - Sony Xperia XZ1         (1920x1080)
> > > > - Sony Xperia XZ Premium  (3840x2160)
> > > >
> > >
> > > Yeah, no worries, I wasn't trying to imply that the patch was untested.
> > >
> > > Out of curiosity, are any of those video mode panels?
> > >
> > > >
> > > > > Also, something (I assume DSI related) that I was testing on
> > > > > msm-next-staging seems to have effected the colors on the panel (ie.
> > > > > they are more muted).. which seems to persist across reboots (ie. when
> > > >
> > > > So much "fun". This makes me think something about the PCC block doing
> > > > the wrong thing (getting misconfigured).
> > > >
> > > > > switching back to a good kernel), and interestingly if I reboot from a
> > > > > good kernel I see part of the login prompt (or whatever was previously
> > > > > on-screen) in the firmware ui screen !?!  (so maybe somehow triggered
> > > > > the display to think it is in PSR mode??)
> > > > >
> > > >
> > > >  From a fast read, the SN65DSI86 is on I2C.. giving it a wrong dsi clock
> > > > cannot produce (logically, at least) this, so I say that it is very
> > > > unlikely for this to be a consequence of the 10nm pll fixes...
> > > >
> > >
> > > Note that the bridge can also be programmed via dsi cmd mode packets,
> > > which I believe is the case on the 835 laptops (or at least one of
> > > them).. but all the things I have are using i2c as the control path.
> > >
> > > > ...unless the bootloader is not configuring the DSI rates, but that's
> > > > also veeeeery unlikely (it always does, or it always does not).
> > >
> > > I haven't looked at the bootloader display code, but booting back to
> > > an old/good kernel didn't change anything..  even powering off didn't.
> > > But the ghost image seemed to fade after some time, and by the next
> > > morning it was fine.  Which is strange. (But tbf, I'm more a gpu guy
> > > who works on display only when necessary.. ie. a gpu without a display
> > > isn't so much fun ;-))
> > >
> > > > > Not sure if that is caused by these patches, but if I can figure out
> > > > > how to get the panel back to normal I can bisect.  I think for now
> > > > > I'll drop this series.  Possibly it could be a
> > > > > two-wrongs-makes-a-right situation that had things working before, but
> > > > > I think someone from qcom who knows the DSI IP should take a look.
> > > > >
> > > >
> > > > I would be happy if someone from Qualcomm takes a look: after all, there
> > > > is no documentation and they're the only ones that can verify this kind
> > > > of stuff. Please, Qualcomm.
> > >
> > > Hopefully someone can take a look.
> > >
> > > > Besides that, if there's anything I can help with to solve this riddle,
> > > > I'm here for you.
> > >
> > > Thanks, like I said I'll try applying the patches one by one and see
> > > if I can narrow down what made the panel go funny, and we can go from
> > > there
> > >
> > > BR,
> > > -R
> > >
> > > > Yours,
> > > > -- Angelo
> > > >
> > > > > BR,
> > > > > -R
> > > > >
> > > > >
> > > > >> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at somainline.org>
> > > > >> ---
> > > > >>   drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c | 22 +++++++++-------------
> > > > >>   1 file changed, 9 insertions(+), 13 deletions(-)
> > > > >>
> > > > >> diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > > > >> index 8b66e852eb36..5be562dfbf06 100644
> > > > >> --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > > > >> +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_10nm.c
> > > > >> @@ -165,11 +165,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_10nm *pll)
> > > > >>
> > > > >>          pll_freq = pll->vco_current_rate;
> > > > >>
> > > > >> -       if (config->disable_prescaler)
> > > > >> -               divider = fref;
> > > > >> -       else
> > > > >> -               divider = fref * 2;
> > > > >> -
> > > > >> +       divider = fref;
> > > > >>          multiplier = 1 << config->frac_bits;
> > > > >>          dec_multiple = div_u64(pll_freq * multiplier, divider);
> > > > >>          dec = div_u64_rem(dec_multiple, multiplier, &frac);
> > > > >> @@ -266,9 +262,11 @@ static void dsi_pll_ssc_commit(struct dsi_pll_10nm *pll)
> > > > >>
> > > > >>   static void dsi_pll_config_hzindep_reg(struct dsi_pll_10nm *pll)
> > > > >>   {
> > > > >> +       struct dsi_pll_config *config = &pll->pll_configuration;
> > > > >>          void __iomem *base = pll->mmio;
> > > > >> +       u32 val = config->disable_prescaler ? 0x0 : 0x80;
> > > > >>
> > > > >> -       pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, 0x80);
> > > > >> +       pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_ONE, val);
> > > > >>          pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_TWO, 0x03);
> > > > >>          pll_write(base + REG_DSI_10nm_PHY_PLL_ANALOG_CONTROLS_THREE, 0x00);
> > > > >>          pll_write(base + REG_DSI_10nm_PHY_PLL_DSM_DIVIDER, 0x00);
> > > > >> @@ -499,17 +497,15 @@ static unsigned long dsi_pll_10nm_vco_recalc_rate(struct clk_hw *hw,
> > > > >>          frac |= ((pll_read(base + REG_DSI_10nm_PHY_PLL_FRAC_DIV_START_HIGH_1) &
> > > > >>                    0x3) << 16);
> > > > >>
> > > > >> -       /*
> > > > >> -        * TODO:
> > > > >> -        *      1. Assumes prescaler is disabled
> > > > >> -        */
> > > > >>          multiplier = 1 << config->frac_bits;
> > > > >> -       pll_freq = dec * (ref_clk * 2);
> > > > >> -       tmp64 = (ref_clk * 2 * frac);
> > > > >> +       pll_freq = dec * ref_clk;
> > > > >> +       tmp64 = ref_clk * frac;
> > > > >>          pll_freq += div_u64(tmp64, multiplier);
> > > > >> -
> > > > >>          vco_rate = pll_freq;
> > > > >>
> > > > >> +       if (config->disable_prescaler)
> > > > >> +               vco_rate = div_u64(vco_rate, 2);
> > > > >> +
> > > > >>          DBG("DSI PLL%d returning vco rate = %lu, dec = %x, frac = %x",
> > > > >>              pll_10nm->id, (unsigned long)vco_rate, dec, frac);
> > > > >>
> > > > >> --
> > > > >> 2.29.2
> > > > >>
> > > >


More information about the dri-devel mailing list