[PATCH 2/2] drm/aspeed: Use dt matching for default register values

Jeremy Kerr jk at ozlabs.org
Tue Feb 2 04:46:52 UTC 2021


Hi Joel,

> There are minor differences in the values for the threshold value and
> the scan line size between families of ASPEED SoC. Additionally the
> SCU register for the output control differs between families.
> 
> This adds device tree matching to parameterise these values, allowing
> us to add support for the AST2400 now, and in the future the AST2600.

Looks good to me. Two super minor things:

> --- a/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> +++ b/drivers/gpu/drm/aspeed/aspeed_gfx_crtc.c
> @@ -60,7 +60,8 @@ static void aspeed_gfx_enable_controller(struct
> aspeed_gfx *priv)
>         u32 ctrl2 = readl(priv->base + CRT_CTRL2);
>  
>         /* SCU2C: set DAC source for display output to Graphics CRT (GFX) */
> -       regmap_update_bits(priv->scu, 0x2c, BIT(16), BIT(16));
> +       regmap_update_bits(priv->scu, priv->dac_reg, BIT(16), BIT(16));

The comment references SCU2C; but you've implied that this will
change...

> @@ -228,7 +258,7 @@ static ssize_t dac_mux_store(struct device *dev,
> struct device_attribute *attr,
>         if (val > 3)
>                 return -EINVAL;
>  
> -       rc = regmap_update_bits(priv->scu, ASPEED_SCU_MISC_CTRL, 0x30000, val << 16);
> +       rc = regmap_update_bits(priv->scu, priv->dac_reg, 0x30000, val << 16);
>         if (rc < 0)
>                 return 0;
>  
> @@ -241,7 +271,7 @@ static ssize_t dac_mux_show(struct device *dev,
> struct device_attribute *attr, c
>         u32 reg;
>         int rc;
>  
> -       rc = regmap_read(priv->scu, ASPEED_SCU_MISC_CTRL, &reg);
> +       rc = regmap_read(priv->scu, priv->dac_reg, &reg);
>         if (rc)
>                 return rc;

You've removed the only uses of ASPEED_SCU_MISC_CTRL here, maybe drop
the #define too?

Regardless:

Reviewed-by: Jeremy Kerr <jk at ozlabs.org>

Cheers,


Jeremy




More information about the dri-devel mailing list