[PATCH rdma-core v7 4/6] pyverbs: Add dma-buf based MR support

Xiong, Jianxin jianxin.xiong at intel.com
Wed Feb 3 16:57:04 UTC 2021


> -----Original Message-----
> From: Leon Romanovsky <leon at kernel.org>
> Sent: Tuesday, February 02, 2021 10:03 PM
> To: Daniel Vetter <daniel at ffwll.ch>
> Cc: Xiong, Jianxin <jianxin.xiong at intel.com>; Jason Gunthorpe <jgg at ziepe.ca>; Gal Pressman <galpress at amazon.com>; Yishai Hadas
> <yishaih at nvidia.com>; linux-rdma <linux-rdma at vger.kernel.org>; Edward Srouji <edwards at nvidia.com>; dri-devel <dri-
> devel at lists.freedesktop.org>; Christian Koenig <christian.koenig at amd.com>; Doug Ledford <dledford at redhat.com>; Vetter, Daniel
> <daniel.vetter at intel.com>
> Subject: Re: [PATCH rdma-core v7 4/6] pyverbs: Add dma-buf based MR support
> 

<...>

> > > > > > > > +#include <drm/drm.h>
> > > > > > > > +#include <drm/i915_drm.h> #include <drm/amdgpu_drm.h>
> > > > > > > > +#include <drm/radeon_drm.h>
> > > > > > >
> > > > > > > I assume these should come from the kernel headers package, right?
> > > > > >
> > > > > > This is gross, all kernel headers should be placed in
> > > > > > kernel-headers/* and "update" script needs to be extended to take drm/* files too :(.
> > > > >
> > > > > drm kernel headers are in the libdrm package. You need that
> > > > > anyway for doing the ioctls (if you don't hand-roll the restarting yourself).
> > > > >
> > > > > Also our userspace has gone over to just outright copying the
> > > > > driver headers. Not the generic headers, but for the rendering
> > > > > side of gpus, which is the topic here, there's really not much generic stuff.
> > > > >
> > > > > > Jianxin, are you fixing it?
> > > > >
> > > > > So fix is either to depend upon libdrm for building, or have
> > > > > copies of the headers included in the package for the
> > > > > i915/amdgpu/radeon headers (drm/drm.h probably not so good idea).
> > > >
> > > > We should have a cmake test to not build the drm parts if it can't be built, and pyverbs should skip the tests.
> > > >
> > >
> > > Yes, I will add a test for that. Also, on SLES, the headers could be under /usr/include/libdrm instead of /usr/include/drm. The make test
> should check that and use proper path.
> >
> > Please use pkgconfig for this, libdrm installs a .pc file to make sure
> > you can find the right headers.
> 
> rdma-core uses cmake build system and in our case cmake find_library() is preferable over pkgconfig.

Only the headers are needed, and they could be installed via either the libdrm-devel package or the kernel-headers package. The cmake find_path() command is more suitable here.
 
> 
> Thanks
> 
> > -Daniel
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch


More information about the dri-devel mailing list