[PATCH v2] drm/qxl: do not run release if qxl failed to init
Tong Zhang
ztong0001 at gmail.com
Thu Feb 4 16:30:50 UTC 2021
if qxl_device_init() fail, drm device will not be registered,
in this case, do not run qxl_drm_release()
[ 5.258534] ==================================================================
[ 5.258931] BUG: KASAN: user-memory-access in qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.259388] Write of size 8 at addr 00000000000014dc by task modprobe/95
[ 5.259754]
[ 5.259842] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc6-00007-g88bb507a74ea #62
[ 5.260309] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda54
[ 5.260917] Call Trace:
[ 5.261056] dump_stack+0x7d/0xa3
[ 5.261245] kasan_report.cold+0x10c/0x10e
[ 5.261475] ? qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.261789] check_memory_region+0x17c/0x1e0
[ 5.262029] qxl_destroy_monitors_object+0x42/0xa0 [qxl]
[ 5.262332] qxl_modeset_fini+0x9/0x20 [qxl]
[ 5.262595] qxl_drm_release+0x22/0x30 [qxl]
[ 5.262841] drm_dev_release+0x32/0x50
[ 5.263047] release_nodes+0x39e/0x410
[ 5.263253] ? devres_release+0x40/0x40
[ 5.263462] really_probe+0x2ea/0x420
[ 5.263664] driver_probe_device+0x6d/0xd0
[ 5.263888] device_driver_attach+0x82/0x90
[ 5.264116] ? device_driver_attach+0x90/0x90
[ 5.264353] __driver_attach+0x60/0x100
[ 5.264563] ? device_driver_attach+0x90/0x90
[ 5.264801] bus_for_each_dev+0xe1/0x140
[ 5.265014] ? subsys_dev_iter_exit+0x10/0x10
[ 5.265251] ? klist_node_init+0x61/0x80
[ 5.265464] bus_add_driver+0x254/0x2a0
[ 5.265673] driver_register+0xd3/0x150
[ 5.265882] ? 0xffffffffc0048000
[ 5.266064] do_one_initcall+0x84/0x250
[ 5.266274] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 5.266596] ? unpoison_range+0xf/0x30
[ 5.266801] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 5.267082] ? unpoison_range+0xf/0x30
[ 5.267287] ? unpoison_range+0xf/0x30
[ 5.267491] do_init_module+0xf8/0x350
[ 5.267697] load_module+0x3fe6/0x4340
[ 5.267902] ? vm_unmap_ram+0x1d0/0x1d0
[ 5.268115] ? module_frob_arch_sections+0x20/0x20
[ 5.268375] ? __do_sys_finit_module+0x108/0x170
[ 5.268624] __do_sys_finit_module+0x108/0x170
[ 5.268865] ? __ia32_sys_init_module+0x40/0x40
[ 5.269111] ? file_open_root+0x200/0x200
[ 5.269330] ? do_sys_open+0x85/0xe0
[ 5.269527] ? filp_open+0x50/0x50
[ 5.269714] ? exit_to_user_mode_prepare+0xfc/0x130
[ 5.269978] do_syscall_64+0x33/0x40
[ 5.270176] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 5.270450] RIP: 0033:0x7fa3f685bcf7
[ 5.270646] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d1
[ 5.271634] RSP: 002b:00007ffca83048d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 5.272037] RAX: ffffffffffffffda RBX: 0000000001e94a70 RCX: 00007fa3f685bcf7
[ 5.272416] RDX: 0000000000000000 RSI: 0000000001e939e0 RDI: 0000000000000003
[ 5.272794] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000001
[ 5.273171] R10: 00007fa3f68bf300 R11: 0000000000000246 R12: 0000000001e939e0
[ 5.273550] R13: 0000000000000000 R14: 0000000001e93bd0 R15: 0000000000000001
[ 5.273928] ==================================================================
Signed-off-by: Tong Zhang <ztong0001 at gmail.com>
---
v2: use qdev->ddev.mode_config.funcs instead of dev->registered, since
mode_config.funcs will only be set if qxl_modeset_init() returns 0
drivers/gpu/drm/qxl/qxl_drv.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/gpu/drm/qxl/qxl_drv.c b/drivers/gpu/drm/qxl/qxl_drv.c
index 6e7f16f4cec7..839d9e7a5765 100644
--- a/drivers/gpu/drm/qxl/qxl_drv.c
+++ b/drivers/gpu/drm/qxl/qxl_drv.c
@@ -144,6 +144,8 @@ static void qxl_drm_release(struct drm_device *dev)
* reodering qxl_modeset_fini() + qxl_device_fini() calls is
* non-trivial though.
*/
+ if (!qdev->ddev.mode_config.funcs)
+ return;
qxl_modeset_fini(qdev);
qxl_device_fini(qdev);
}
--
2.25.1
More information about the dri-devel
mailing list