[RFC][PATCH v6 6/7] dma-buf: system_heap: Add drm pagepool support to system heap

John Stultz john.stultz at linaro.org
Fri Feb 5 08:06:20 UTC 2021


Utilize the drm pagepool code to speed up allocation
performance.

This is similar to the ION pagepool usage, but tries to
utilize generic code instead of a custom implementation.

Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Christian Koenig <christian.koenig at amd.com>
Cc: Sumit Semwal <sumit.semwal at linaro.org>
Cc: Liam Mark <lmark at codeaurora.org>
Cc: Chris Goldsworthy <cgoldswo at codeaurora.org>
Cc: Laura Abbott <labbott at kernel.org>
Cc: Brian Starkey <Brian.Starkey at arm.com>
Cc: Hridya Valsaraju <hridya at google.com>
Cc: Suren Baghdasaryan <surenb at google.com>
Cc: Sandeep Patil <sspatil at google.com>
Cc: Daniel Mentz <danielmentz at google.com>
Cc: Ørjan Eide <orjan.eide at arm.com>
Cc: Robin Murphy <robin.murphy at arm.com>
Cc: Ezequiel Garcia <ezequiel at collabora.com>
Cc: Simon Ser <contact at emersion.fr>
Cc: James Jones <jajones at nvidia.com>
Cc: linux-media at vger.kernel.org
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz at linaro.org>
---
v2:
* Fix build issue caused by selecting PAGE_POOL w/o NET
  as Reported-by: kernel test robot <lkp at intel.com>
v3:
* Simplify the page zeroing logic a bit by using kmap_atomic
  instead of vmap as suggested by Daniel Mentz
v5:
* Shift away from networking page pool completely to
  dmabuf page pool implementation
v6:
* Switch again to using the drm_page_pool code shared w/
  ttm_pool
---
 drivers/dma-buf/heaps/Kconfig       |  1 +
 drivers/dma-buf/heaps/system_heap.c | 56 +++++++++++++++++++++++++++--
 2 files changed, 54 insertions(+), 3 deletions(-)

diff --git a/drivers/dma-buf/heaps/Kconfig b/drivers/dma-buf/heaps/Kconfig
index f7aef8bc7119..7e28934e0def 100644
--- a/drivers/dma-buf/heaps/Kconfig
+++ b/drivers/dma-buf/heaps/Kconfig
@@ -4,6 +4,7 @@ config DMABUF_HEAPS_DEFERRED_FREE
 config DMABUF_HEAPS_SYSTEM
 	bool "DMA-BUF System Heap"
 	depends on DMABUF_HEAPS
+	select DRM_PAGE_POOL
 	help
 	  Choose this option to enable the system dmabuf heap. The system heap
 	  is backed by pages from the buddy allocator. If in doubt, say Y.
diff --git a/drivers/dma-buf/heaps/system_heap.c b/drivers/dma-buf/heaps/system_heap.c
index 17e0e9a68baf..6d39e9f32e36 100644
--- a/drivers/dma-buf/heaps/system_heap.c
+++ b/drivers/dma-buf/heaps/system_heap.c
@@ -21,6 +21,8 @@
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
 
+#include <drm/page_pool.h>
+
 static struct dma_heap *sys_heap;
 
 struct system_heap_buffer {
@@ -53,6 +55,7 @@ static gfp_t order_flags[] = {HIGH_ORDER_GFP, LOW_ORDER_GFP, LOW_ORDER_GFP};
  */
 static const unsigned int orders[] = {8, 4, 0};
 #define NUM_ORDERS ARRAY_SIZE(orders)
+struct drm_page_pool *pools[NUM_ORDERS];
 
 static struct sg_table *dup_sg_table(struct sg_table *table)
 {
@@ -281,18 +284,49 @@ static void system_heap_vunmap(struct dma_buf *dmabuf, struct dma_buf_map *map)
 	dma_buf_map_clear(map);
 }
 
+static int system_heap_free_pages(struct page *p, unsigned int order)
+{
+	__free_pages(p, order);
+	return 1 << order;
+}
+
+static int system_heap_zero_buffer(struct system_heap_buffer *buffer)
+{
+	struct sg_table *sgt = &buffer->sg_table;
+	struct sg_page_iter piter;
+	struct page *p;
+	void *vaddr;
+	int ret = 0;
+
+	for_each_sgtable_page(sgt, &piter, 0) {
+		p = sg_page_iter_page(&piter);
+		vaddr = kmap_atomic(p);
+		memset(vaddr, 0, PAGE_SIZE);
+		kunmap_atomic(vaddr);
+	}
+
+	return ret;
+}
+
 static void system_heap_dma_buf_release(struct dma_buf *dmabuf)
 {
 	struct system_heap_buffer *buffer = dmabuf->priv;
 	struct sg_table *table;
 	struct scatterlist *sg;
-	int i;
+	int i, j;
+
+	/* Zero the buffer pages before adding back to the pool */
+	system_heap_zero_buffer(buffer);
 
 	table = &buffer->sg_table;
 	for_each_sg(table->sgl, sg, table->nents, i) {
 		struct page *page = sg_page(sg);
 
-		__free_pages(page, compound_order(page));
+		for (j = 0; j < NUM_ORDERS; j++) {
+			if (compound_order(page) == orders[j])
+				break;
+		}
+		drm_page_pool_add(pools[j], page);
 	}
 	sg_free_table(table);
 	kfree(buffer);
@@ -323,7 +357,9 @@ static struct page *alloc_largest_available(unsigned long size,
 		if (max_order < orders[i])
 			continue;
 
-		page = alloc_pages(order_flags[i], orders[i]);
+		page = drm_page_pool_fetch(pools[i]);
+		if (!page)
+			page = alloc_pages(order_flags[i], orders[i]);
 		if (!page)
 			continue;
 		return page;
@@ -428,6 +464,20 @@ static const struct dma_heap_ops system_heap_ops = {
 static int system_heap_create(void)
 {
 	struct dma_heap_export_info exp_info;
+	int i;
+
+	for (i = 0; i < NUM_ORDERS; i++) {
+		pools[i] = drm_page_pool_create(orders[i],
+						system_heap_free_pages);
+		if (IS_ERR(pools[i])) {
+			int j;
+
+			pr_err("%s: page pool creation failed!\n", __func__);
+			for (j = 0; j < i; j++)
+				drm_page_pool_destroy(pools[j]);
+			return PTR_ERR(pools[i]);
+		}
+	}
 
 	exp_info.name = "system";
 	exp_info.ops = &system_heap_ops;
-- 
2.25.1



More information about the dri-devel mailing list