[PATCH v2 3/3] drm/panfrost: Stay in the threaded MMU IRQ handler until we've handled all IRQs
Boris Brezillon
boris.brezillon at collabora.com
Fri Feb 5 11:17:57 UTC 2021
Doing a hw-irq -> threaded-irq round-trip is counter-productive, stay
in the threaded irq handler as long as we can.
v2:
* Rework the loop to avoid a goto
Signed-off-by: Boris Brezillon <boris.brezillon at collabora.com>
---
drivers/gpu/drm/panfrost/panfrost_mmu.c | 26 +++++++++++++------------
1 file changed, 14 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_mmu.c b/drivers/gpu/drm/panfrost/panfrost_mmu.c
index 21e552d1ac71..0581186ebfb3 100644
--- a/drivers/gpu/drm/panfrost/panfrost_mmu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_mmu.c
@@ -578,22 +578,20 @@ static irqreturn_t panfrost_mmu_irq_handler_thread(int irq, void *data)
{
struct panfrost_device *pfdev = data;
u32 status = mmu_read(pfdev, MMU_INT_RAWSTAT);
- int i, ret;
+ int ret;
- for (i = 0; status; i++) {
- u32 mask = BIT(i) | BIT(i + 16);
+ while (status) {
+ u32 as = ffs(status | (status >> 16)) - 1;
+ u32 mask = BIT(as) | BIT(as + 16);
u64 addr;
u32 fault_status;
u32 exception_type;
u32 access_type;
u32 source_id;
- if (!(status & mask))
- continue;
-
- fault_status = mmu_read(pfdev, AS_FAULTSTATUS(i));
- addr = mmu_read(pfdev, AS_FAULTADDRESS_LO(i));
- addr |= (u64)mmu_read(pfdev, AS_FAULTADDRESS_HI(i)) << 32;
+ fault_status = mmu_read(pfdev, AS_FAULTSTATUS(as));
+ addr = mmu_read(pfdev, AS_FAULTADDRESS_LO(as));
+ addr |= (u64)mmu_read(pfdev, AS_FAULTADDRESS_HI(as)) << 32;
/* decode the fault status */
exception_type = fault_status & 0xFF;
@@ -604,8 +602,8 @@ static irqreturn_t panfrost_mmu_irq_handler_thread(int irq, void *data)
/* Page fault only */
ret = -1;
- if ((status & mask) == BIT(i) && (exception_type & 0xF8) == 0xC0)
- ret = panfrost_mmu_map_fault_addr(pfdev, i, addr);
+ if ((status & mask) == BIT(as) && (exception_type & 0xF8) == 0xC0)
+ ret = panfrost_mmu_map_fault_addr(pfdev, as, addr);
if (ret)
/* terminal fault, print info about the fault */
@@ -617,7 +615,7 @@ static irqreturn_t panfrost_mmu_irq_handler_thread(int irq, void *data)
"exception type 0x%X: %s\n"
"access type 0x%X: %s\n"
"source id 0x%X\n",
- i, addr,
+ as, addr,
"TODO",
fault_status,
(fault_status & (1 << 10) ? "DECODER FAULT" : "SLAVE FAULT"),
@@ -626,6 +624,10 @@ static irqreturn_t panfrost_mmu_irq_handler_thread(int irq, void *data)
source_id);
status &= ~mask;
+
+ /* If we received new MMU interrupts, process them before returning. */
+ if (!status)
+ status = mmu_read(pfdev, MMU_INT_RAWSTAT);
}
mmu_write(pfdev, MMU_INT_MASK, ~0);
--
2.26.2
More information about the dri-devel
mailing list