[PATCH v3 2/4] drm_dp_mst_topology: use correct AUX channel

Ville Syrjälä ville.syrjala at linux.intel.com
Fri Feb 5 13:24:20 UTC 2021


On Fri, Feb 05, 2021 at 04:17:51PM +1100, Sam McNally wrote:
> On Thu, 4 Feb 2021 at 21:19, Hans Verkuil <hverkuil at xs4all.nl> wrote:
> >
> > On 01/02/2021 23:13, Ville Syrjälä wrote:
> > > On Wed, Sep 23, 2020 at 12:13:53PM +1000, Sam McNally wrote:
> > >> From: Hans Verkuil <hans.verkuil at cisco.com>
> > >>
> > >> For adapters behind an MST hub use the correct AUX channel.
> > >>
> > >> Signed-off-by: Hans Verkuil <hans.verkuil at cisco.com>
> > >> [sammc at chromium.org: rebased, removing redundant changes]
> > >> Signed-off-by: Sam McNally <sammc at chromium.org>
> > >> ---
> > >>
> > >> (no changes since v1)
> > >>
> > >>  drivers/gpu/drm/drm_dp_mst_topology.c | 36 +++++++++++++++++++++++++++
> > >>  1 file changed, 36 insertions(+)
> > >>
> > >> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> > >> index 15b6cc39a754..0d753201adbd 100644
> > >> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> > >> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> > >> @@ -2255,6 +2255,9 @@ drm_dp_mst_topology_unlink_port(struct drm_dp_mst_topology_mgr *mgr,
> > >>      drm_dp_mst_topology_put_port(port);
> > >>  }
> > >>
> > >> +static ssize_t
> > >> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg);
> > >> +
> > >>  static struct drm_dp_mst_port *
> > >>  drm_dp_mst_add_port(struct drm_device *dev,
> > >>                  struct drm_dp_mst_topology_mgr *mgr,
> > >> @@ -2271,9 +2274,13 @@ drm_dp_mst_add_port(struct drm_device *dev,
> > >>      port->port_num = port_number;
> > >>      port->mgr = mgr;
> > >>      port->aux.name = "DPMST";
> > >> +    mutex_init(&port->aux.hw_mutex);
> > >> +    mutex_init(&port->aux.cec.lock);
> > >>      port->aux.dev = dev->dev;
> > >>      port->aux.is_remote = true;
> > >>
> > >> +    port->aux.transfer = drm_dp_mst_aux_transfer;
> > >> +
> > >
> > > This was supposed to be handled via higher levels checking for
> > > is_remote==true.
> >
> > Ah, I suspect this patch can be dropped entirely: it predates commit 2f221a5efed4
> > ("drm/dp_mst: Add MST support to DP DPCD R/W functions").
> >
> > It looks like that commit basically solved what this older patch attempts to do
> > as well.
> >
> > Sam, can you test if it works without this patch?
> 
> It almost just works; drm_dp_cec uses whether aux.transfer is non-null
> to filter out non-DP connectors. Using aux.is_remote as another signal
> indicating a DP connector seems plausible. We can drop this patch.

Why would anyone even call this stuff on a non-DP connector?
And where did they even get the struct drm_dp_aux to do so?

> Thanks all!
> >
> > Regards,
> >
> >         Hans
> >
> > >
> > >>      /* initialize the MST downstream port's AUX crc work queue */
> > >>      drm_dp_remote_aux_init(&port->aux);
> > >>
> > >> @@ -3503,6 +3510,35 @@ static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr,
> > >>      return 0;
> > >>  }
> > >>
> > >> +static ssize_t
> > >> +drm_dp_mst_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg)
> > >> +{
> > >> +    struct drm_dp_mst_port *port =
> > >> +            container_of(aux, struct drm_dp_mst_port, aux);
> > >> +    int ret;
> > >> +
> > >> +    switch (msg->request & ~DP_AUX_I2C_MOT) {
> > >> +    case DP_AUX_NATIVE_WRITE:
> > >> +    case DP_AUX_I2C_WRITE:
> > >> +    case DP_AUX_I2C_WRITE_STATUS_UPDATE:
> > >> +            ret = drm_dp_send_dpcd_write(port->mgr, port, msg->address,
> > >> +                                         msg->size, msg->buffer);
> > >
> > > That doesn't make sense to me. I2c writes and DPCD writes
> > > are definitely not the same thing.
> > >
> > > aux->transfer is a very low level thing. I don't think it's the
> > > correct level of abstraction for sideband.
> > >
> > >> +            break;
> > >> +
> > >> +    case DP_AUX_NATIVE_READ:
> > >> +    case DP_AUX_I2C_READ:
> > >> +            ret = drm_dp_send_dpcd_read(port->mgr, port, msg->address,
> > >> +                                        msg->size, msg->buffer);
> > >> +            break;
> > >> +
> > >> +    default:
> > >> +            ret = -EINVAL;
> > >> +            break;
> > >> +    }
> > >> +
> > >> +    return ret;
> > >> +}
> > >> +
> > >>  static int drm_dp_get_vc_payload_bw(u8 dp_link_bw, u8  dp_link_count)
> > >>  {
> > >>      if (dp_link_bw == 0 || dp_link_count == 0)
> > >> --
> > >> 2.28.0.681.g6f77f65b4e-goog
> > >>
> > >> _______________________________________________
> > >> dri-devel mailing list
> > >> dri-devel at lists.freedesktop.org
> > >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > >
> >

-- 
Ville Syrjälä
Intel


More information about the dri-devel mailing list