[PATCH 2/3] drm/dp_helper: Define options for FRL training for HDMI2.1 PCON
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Thu Feb 11 06:56:25 UTC 2021
On 2/6/2021 1:30 AM, Ville Syrjälä wrote:
> On Thu, Feb 04, 2021 at 12:18:41PM +0530, Ankit Nautiyal wrote:
>> Currently the FRL training mode (Concurrent, Sequential) and
>> training type (Normal, Extended) are not defined properly and
>> are passed as bool values in drm_helpers for pcon
>> configuration for FRL training.
>>
>> This patch:
>> -Defines FRL training type and link bring up sequence mode as enum.
>> -Fixes the drm_helpers for FRL Training configuration to use these enums.
>> -Modifies the calls to the above drm_helpers in i915/intel_dp as per the
>> above change.
>>
>> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
>> ---
>> drivers/gpu/drm/drm_dp_helper.c | 18 +++++-----
>> drivers/gpu/drm/i915/display/intel_dp.c | 10 +++---
>> include/drm/drm_dp_helper.h | 46 +++++++++++++++++++++++--
>> 3 files changed, 56 insertions(+), 18 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c
>> index eedbb48815b7..2ca4ab5af470 100644
>> --- a/drivers/gpu/drm/drm_dp_helper.c
>> +++ b/drivers/gpu/drm/drm_dp_helper.c
>> @@ -2635,14 +2635,13 @@ EXPORT_SYMBOL(drm_dp_pcon_is_frl_ready);
>> * drm_dp_pcon_frl_configure_1() - Set HDMI LINK Configuration-Step1
>> * @aux: DisplayPort AUX channel
>> * @max_frl_gbps: maximum frl bw to be configured between PCON and HDMI sink
>> - * @concurrent_mode: true if concurrent mode or operation is required,
>> - * false otherwise.
>> + * @frl_mode: FRL Training mode, it can be either Concurrent or Sequential.
>> *
>> * Returns 0 if success, else returns negative error code.
>> */
>>
>> int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
>> - bool concurrent_mode)
>> + enum dp_pcon_frl_train_mode frl_mode)
>> {
>> int ret;
>> u8 buf;
>> @@ -2651,7 +2650,7 @@ int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
>> if (ret < 0)
>> return ret;
>>
>> - if (concurrent_mode)
>> + if (frl_mode == DP_PCON_FRL_MODE_CONCURRENT)
>> buf |= DP_PCON_ENABLE_CONCURRENT_LINK;
>> else
>> buf &= ~DP_PCON_ENABLE_CONCURRENT_LINK;
>> @@ -2694,21 +2693,20 @@ EXPORT_SYMBOL(drm_dp_pcon_frl_configure_1);
>> * drm_dp_pcon_frl_configure_2() - Set HDMI Link configuration Step-2
>> * @aux: DisplayPort AUX channel
>> * @max_frl_mask : Max FRL BW to be tried by the PCON with HDMI Sink
>> - * @extended_train_mode : true for Extended Mode, false for Normal Mode.
>> - * In Normal mode, the PCON tries each frl bw from the max_frl_mask starting
>> - * from min, and stops when link training is successful. In Extended mode, all
>> - * frl bw selected in the mask are trained by the PCON.
>> + * @frl_type : FRL training type, can be Extended, or Normal.
>> *
>> * Returns 0 if success, else returns negative error code.
>> */
>> int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
>> - bool extended_train_mode)
>> + enum dp_pcon_frl_train_type frl_type)
>> {
>> int ret;
>> u8 buf = max_frl_mask;
>>
>> - if (extended_train_mode)
>> + if (frl_type == DP_PCON_FRL_TRAIN_EXTENDED)
>> buf |= DP_PCON_FRL_LINK_TRAIN_EXTENDED;
>> + else
>> + buf &= ~DP_PCON_FRL_LINK_TRAIN_EXTENDED;
> These names are annoyingly close to each other. Prettu much
> guaranteed to mix them up at some point. We should try to come
> up something a bit more distinctive for the enum, or just forget
> the enum and use the register values directly.
Agreed. Sent next version of the patch, dropping the enum and used only
appropriate register values.
Thanks & Regards,
Ankit
>>
>> ret = drm_dp_dpcd_writeb(aux, DP_PCON_HDMI_LINK_CONFIG_2, buf);
>> if (ret < 0)
>> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
>> index 2b83f0f433a2..1962d6dd8641 100644
>> --- a/drivers/gpu/drm/i915/display/intel_dp.c
>> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
>> @@ -2560,10 +2560,6 @@ static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp)
>>
>> static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
>> {
>> -#define PCON_EXTENDED_TRAIN_MODE (1 > 0)
>> -#define PCON_CONCURRENT_MODE (1 > 0)
>> -#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE
>> -#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE
>> #define TIMEOUT_FRL_READY_MS 500
>> #define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000
>>
>> @@ -2597,10 +2593,12 @@ static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp)
>> return -ETIMEDOUT;
>>
>> max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw);
>> - ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE);
>> + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw,
>> + DP_PCON_FRL_MODE_SEQUENTIAL);
>> if (ret < 0)
>> return ret;
>> - ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE);
>> + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask,
>> + DP_PCON_FRL_TRAIN_NORMAL);
>> if (ret < 0)
>> return ret;
>> ret = drm_dp_pcon_frl_enable(&intel_dp->aux);
>> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
>> index edffd1dcca3e..c3f56e87a5ec 100644
>> --- a/include/drm/drm_dp_helper.h
>> +++ b/include/drm/drm_dp_helper.h
>> @@ -1646,6 +1646,48 @@ enum dp_content_type {
>> DP_CONTENT_TYPE_GAME = 0x04,
>> };
>>
>> +/**
>> + * enum dp_pcon_frl_train_type - drm DP PCON FRL Training Type
>> + *
>> + * This enum is used to select FRL training type for FRL training between
>> + * an HDMI2.1 PCON and an HDMI2.1 sink.
>> + *
>> + * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
>> + * Sec 6.1 Table-3.
>> + * In Normal FRL training, the PCON tries each frl bw from the MAX FRL MASK
>> + * starting from min, and stops when link training is successful.
>> + * In Extended FRL training, all frl bw selected in the mask are trained by the
>> + * PCON.
>> + *
>> + * @DP_PCON_FRL_TRAIN_NORMAL: FRL training type Normal
>> + * @DP_PCON_FRL_TRAIN_EXTENDED: FRL training type Extended
>> + */
>> +enum dp_pcon_frl_train_type {
>> + DP_PCON_FRL_TRAIN_NORMAL = 0,
>> + DP_PCON_FRL_TRAIN_EXTENDED = 1,
>> +};
>> +
>> +/**
>> + * enum dp_pcon_frl_train_mode - drm DP PCON FRL Training Mode
>> + *
>> + * This enum is used to select mode for FRL Link bringup between an HDMI2.1
>> + * PCON and an HDMI2.1 sink.
>> + *
>> + * It is based on VESA DP-to-HDMI Protocol Converter (PCON) Specification
>> + * Sec 6.1 Table-3.
>> + * In Concurrent Mode, the FRL link bring up can be done along with DP Link
>> + * training. In Sequential mode, the FRL link bring up is done prior to the
>> + * DP Link training.
>> + *
>> + * @DP_PCON_FRL_MODE_SEQUENTIAL: Sequential Training mode
>> + * @DP_PCON_FRL_MODE_CONCURRENT: Concurrent Training mode
>> + */
>> +
>> +enum dp_pcon_frl_train_mode {
>> + DP_PCON_FRL_MODE_SEQUENTIAL = 0,
>> + DP_PCON_FRL_MODE_CONCURRENT = 1,
>> +};
>> +
>> /**
>> * struct drm_dp_vsc_sdp - drm DP VSC SDP
>> *
>> @@ -2149,9 +2191,9 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE],
>> int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd);
>> bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux);
>> int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps,
>> - bool concurrent_mode);
>> + enum dp_pcon_frl_train_mode frl_mode);
>> int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask,
>> - bool extended_train_mode);
>> + enum dp_pcon_frl_train_type frl_type);
>> int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux);
>> int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux);
>>
>> --
>> 2.29.2
More information about the dri-devel
mailing list