[PATCH] drm/prime: Only call dma_map_sgtable() for devices with DMA support
Daniel Vetter
daniel at ffwll.ch
Tue Feb 23 10:14:12 UTC 2021
On Mon, Feb 22, 2021 at 06:30:35PM +0100, Noralf Trønnes wrote:
>
>
> Den 22.02.2021 08.54, skrev Thomas Zimmermann:
> > Hi
> >
> > Am 20.02.21 um 14:02 schrieb Noralf Trønnes:
> >>
> >>
> >> Den 19.02.2021 14.40, skrev Thomas Zimmermann:
> >>> Fixes a regression for udl and probably other USB-based drivers where
> >>> joining and mirroring displays fails.
> >>>
> >>> Joining displays requires importing a dma_buf from another DRM driver.
> >>> These devices don't support DMA and therefore have no DMA mask. Trying
> >>> to map imported buffers from a DMA-able memory zone fails with an error.
> >>> An example is shown below.
> >>>
> >>> [ 60.050199] ------------[ cut here ]------------
> >>> [ 60.055092] WARNING: CPU: 0 PID: 1403 at kernel/dma/mapping.c:190
> >>> dma_map_sg_attrs+0x8f/0xc0
> >>> [ 60.064331] Modules linked in: af_packet(E) rfkill(E) dmi_sysfs(E)
> >>> intel_rapl_msr(E) intel_rapl_common(E) snd_hda_codec_realtek(E)
> >>> snd_hda_codec_generic(E) ledtrig_audio(E) snd_hda_codec_hdmi(E)
> >>> x86_pkg_temp_thermal(E) intel_powerclam)
> >>> [ 60.064801] wmi(E) video(E) btrfs(E) blake2b_generic(E)
> >>> libcrc32c(E) crc32c_intel(E) xor(E) raid6_pq(E) sg(E) dm_multipath(E)
> >>> dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) msr(E)
> >>> efivarfs(E)
> >>> [ 60.170778] CPU: 0 PID: 1403 Comm: Xorg.bin Tainted: G
> >>> E 5.11.0-rc5-1-default+ #747
> >>> [ 60.179841] Hardware name: Dell Inc. OptiPlex 9020/0N4YC8, BIOS
> >>> A24 10/24/2018
> >>> [ 60.187145] RIP: 0010:dma_map_sg_attrs+0x8f/0xc0
> >>> [ 60.191822] Code: 4d 85 ff 75 2b 49 89 d8 44 89 e1 44 89 f2 4c 89
> >>> ee 48 89 ef e8 62 30 00 00 85 c0 78 36 5b 5d 41 5c 41 5d 41 5e 41 5f
> >>> c3 0f 0b <0f> 0b 31 c0 eb ed 49 8d 7f 50 e8 72 f5 2a 00 49 8b 47 50
> >>> 49 89 d8
> >>> [ 60.210770] RSP: 0018:ffffc90001d6fc18 EFLAGS: 00010246
> >>> [ 60.216062] RAX: 0000000000000000 RBX: 0000000000000020 RCX:
> >>> ffffffffb31e677b
> >>> [ 60.223274] RDX: dffffc0000000000 RSI: ffff888212c10600 RDI:
> >>> ffff8881b08a9488
> >>> [ 60.230501] RBP: ffff8881b08a9030 R08: 0000000000000020 R09:
> >>> ffff888212c10600
> >>> [ 60.237710] R10: ffffed10425820df R11: 0000000000000001 R12:
> >>> 0000000000000000
> >>> [ 60.244939] R13: ffff888212c10600 R14: 0000000000000008 R15:
> >>> 0000000000000000
> >>> [ 60.252155] FS: 00007f08ac2b2f00(0000) GS:ffff8887cbe00000(0000)
> >>> knlGS:0000000000000000
> >>> [ 60.260333] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> >>> [ 60.266150] CR2: 000055831c899be8 CR3: 000000015372e006 CR4:
> >>> 00000000001706f0
> >>> [ 60.273369] Call Trace:
> >>> [ 60.275845] drm_gem_map_dma_buf+0xb4/0x120
> >>> [ 60.280089] dma_buf_map_attachment+0x15d/0x1e0
> >>> [ 60.284688] drm_gem_prime_import_dev.part.0+0x5d/0x140
> >>> [ 60.289984] drm_gem_prime_fd_to_handle+0x213/0x280
> >>> [ 60.294931] ? drm_prime_destroy_file_private+0x30/0x30
> >>> [ 60.300224] drm_ioctl_kernel+0x131/0x180
> >>> [ 60.304291] ? drm_setversion+0x230/0x230
> >>> [ 60.308366] ? drm_prime_destroy_file_private+0x30/0x30
> >>> [ 60.313659] drm_ioctl+0x2f1/0x500
> >>> [ 60.317118] ? drm_version+0x150/0x150
> >>> [ 60.320903] ? lock_downgrade+0xa0/0xa0
> >>> [ 60.324806] ? do_vfs_ioctl+0x5f4/0x680
> >>> [ 60.328694] ? __fget_files+0x13e/0x210
> >>> [ 60.332591] ? ioctl_fiemap.isra.0+0x1a0/0x1a0
> >>> [ 60.337102] ? __fget_files+0x15d/0x210
> >>> [ 60.340990] __x64_sys_ioctl+0xb9/0xf0
> >>> [ 60.344795] do_syscall_64+0x33/0x80
> >>> [ 60.348427] entry_SYSCALL_64_after_hwframe+0x44/0xa9
> >>
> >> I'm working on a USB display driver and got the same splat (although
> >> from i915_gem_map_dma_buf) and silenced it using:
> >>
> >> ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(64));
> >>
> >> But I understand now that this is not the solution.
> >>
> >> Since the USB host controller can do DMA, would the following be an
> >> acceptable solution?
> >
> > Not all controllers can do DMA AFAIK, so it's maybe not reliable. I'll
> > send out another patch to address the issue later today.
> >
>
> I looked at your other attempt at fixing this and the discussion about
> how much work it is to fix this properly.
>
> For my use case I think I just won't support import on a USB controller
> without DMA:
>
> if (!usb->bus->controller->dma_mask)
> return -ENOSYS;
>
> A USB controller without DMA must be rare and I'll deal with that later
> should the need arise.
>
> Thanks for bringing this issue to my attention.
Yeah I think that's a reasonable short-term fix. Not perfect, but good
enough for years most likely :-)
-Daniel
>
> Noralf.
>
> > Best regards
> > Thomas
> >
> >>
> >> static struct drm_gem_object *gud_gem_prime_import(struct drm_device
> >> *drm, struct dma_buf *dma_buf)
> >> {
> >> struct usb_device *usb = gud_to_usb_device(to_gud_device(drm));
> >>
> >> drm_dbg_prime(drm, "usb->bus->controller=%s\n",
> >> dev_name(usb->bus->controller));
> >>
> >> return drm_gem_prime_import_dev(drm, dma_buf, usb->bus->controller);
> >> }
> >>
> >> static const struct drm_driver gud_drm_driver = {
> >> .gem_prime_import = gud_gem_prime_import,
> >> };
> >>
> >>
> >> Noralf.
> >>
> >>> [ 60.353542] RIP: 0033:0x7f08ac7b53cb
> >>> [ 60.357168] Code: 89 d8 49 8d 3c 1c 48 f7 d8 49 39 c4 72 b5 e8 1c
> >>> ff ff ff 85 c0 78 ba 4c 89 e0 5b 5d 41 5c c3 f3 0f 1e fa b8 10 00 00
> >>> 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 75 ba 0c 00 f7 d8 64
> >>> 89 01 48
> >>> [ 60.376108] RSP: 002b:00007ffeabc89fc8 EFLAGS: 00000246 ORIG_RAX:
> >>> 0000000000000010
> >>> [ 60.383758] RAX: ffffffffffffffda RBX: 00007ffeabc8a00c RCX:
> >>> 00007f08ac7b53cb
> >>> [ 60.390970] RDX: 00007ffeabc8a00c RSI: 00000000c00c642e RDI:
> >>> 000000000000000d
> >>> [ 60.398221] RBP: 00000000c00c642e R08: 000055831c691d00 R09:
> >>> 000055831b2ec010
> >>> [ 60.405446] R10: 00007f08acf6ada0 R11: 0000000000000246 R12:
> >>> 000055831c691d00
> >>> [ 60.412667] R13: 000000000000000d R14: 00000000007e9000 R15:
> >>> 0000000000000000
> >>> [ 60.419903] irq event stamp: 672893
> >>> [ 60.423441] hardirqs last enabled at (672913):
> >>> [<ffffffffb31b796d>] console_unlock+0x44d/0x500
> >>> [ 60.432230] hardirqs last disabled at (672922):
> >>> [<ffffffffb31b7963>] console_unlock+0x443/0x500
> >>> [ 60.441021] softirqs last enabled at (672940):
> >>> [<ffffffffb46003dd>] __do_softirq+0x3dd/0x554
> >>> [ 60.449634] softirqs last disabled at (672931):
> >>> [<ffffffffb44010f2>] asm_call_irq_on_stack+0x12/0x20
> >>> [ 60.458871] ---[ end trace f2f88696eb17806c ]---
> >>>
> >>> For the fix, we don't call dma_map_sgtable() for devices without the
> >>> DMA mask. Drivers for such devices have to map the imported buffer into
> >>> kernel address space and perfom the copy operation in software.
> >>>
> >>> Tested by joining/mirroring displays of udl and radeon un der Gnome/X11.
> >>>
> >>> Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
> >>> Fixes: 6eb0233ec2d0 ("usb: don't inherity DMA properties for USB
> >>> devices")
> >>> Cc: Christoph Hellwig <hch at lst.de>
> >>> Cc: Greg Kroah-Hartman <gregkh at linuxfoundation.org>
> >>> Cc: Alan Stern <stern at rowland.harvard.edu>
> >>> Cc: Johan Hovold <johan at kernel.org>
> >>> Cc: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
> >>> Cc: Sebastian Andrzej Siewior <bigeasy at linutronix.de>
> >>> Cc: "Ahmed S. Darwish" <a.darwish at linutronix.de>
> >>> Cc: Mathias Nyman <mathias.nyman at linux.intel.com>
> >>> Cc: Oliver Neukum <oneukum at suse.com>
> >>> Cc: Felipe Balbi <balbi at kernel.org>
> >>> Cc: Thomas Gleixner <tglx at linutronix.de>
> >>> Cc: <stable at vger.kernel.org> # v5.10+
> >>> ---
> >>> drivers/gpu/drm/drm_prime.c | 27 ++++++++++++++++++---------
> >>> 1 file changed, 18 insertions(+), 9 deletions(-)
> >>>
> >>> diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c
> >>> index 2a54f86856af..d5a39fe76b78 100644
> >>> --- a/drivers/gpu/drm/drm_prime.c
> >>> +++ b/drivers/gpu/drm/drm_prime.c
> >>> @@ -603,10 +603,15 @@ EXPORT_SYMBOL(drm_gem_map_detach);
> >>> * @attach: attachment whose scatterlist is to be returned
> >>> * @dir: direction of DMA transfer
> >>> *
> >>> - * Calls &drm_gem_object_funcs.get_sg_table and then maps the
> >>> scatterlist. This
> >>> - * can be used as the &dma_buf_ops.map_dma_buf callback. Should be
> >>> used together
> >>> + * Calls &drm_gem_object_funcs.get_sg_table and, if possible, maps
> >>> the scatterlist.
> >>> + * This can be used as the &dma_buf_ops.map_dma_buf callback. Should
> >>> be used together
> >>> * with drm_gem_unmap_dma_buf().
> >>> *
> >>> + * Devices on some peripheral busses, such as USB, cannot use DMA.
> >>> In this case,
> >>> + * pages in the scatterlist remain unmapped. Drivers for such
> >>> devices should acquire
> >>> + * a mapping with dma_buf_vmap() and implement copy operation via
> >>> bus-specific
> >>> + * interfaces.
> >>> + *
> >>> * Returns:sg_table containing the scatterlist to be returned;
> >>> returns ERR_PTR
> >>> * on error. May return -EINTR if it is interrupted by a signal.
> >>> */
> >>> @@ -627,12 +632,14 @@ struct sg_table *drm_gem_map_dma_buf(struct
> >>> dma_buf_attachment *attach,
> >>> if (IS_ERR(sgt))
> >>> return sgt;
> >>>
> >>> - ret = dma_map_sgtable(attach->dev, sgt, dir,
> >>> - DMA_ATTR_SKIP_CPU_SYNC);
> >>> - if (ret) {
> >>> - sg_free_table(sgt);
> >>> - kfree(sgt);
> >>> - sgt = ERR_PTR(ret);
> >>> + if (attach->dev->dma_mask) {
> >>> + ret = dma_map_sgtable(attach->dev, sgt, dir,
> >>> + DMA_ATTR_SKIP_CPU_SYNC);
> >>> + if (ret) {
> >>> + sg_free_table(sgt);
> >>> + kfree(sgt);
> >>> + sgt = ERR_PTR(ret);
> >>> + }
> >>> }
> >>>
> >>> return sgt;
> >>> @@ -654,7 +661,9 @@ void drm_gem_unmap_dma_buf(struct
> >>> dma_buf_attachment *attach,
> >>> if (!sgt)
> >>> return;
> >>>
> >>> - dma_unmap_sgtable(attach->dev, sgt, dir, DMA_ATTR_SKIP_CPU_SYNC);
> >>> + if (attach->dev->dma_mask)
> >>> + dma_unmap_sgtable(attach->dev, sgt, dir,
> >>> DMA_ATTR_SKIP_CPU_SYNC);
> >>> +
> >>> sg_free_table(sgt);
> >>> kfree(sgt);
> >>> }
> >>> --
> >>> 2.30.0
> >>>
> >> _______________________________________________
> >> dri-devel mailing list
> >> dri-devel at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >>
> >
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the dri-devel
mailing list