[PATCH 13/40] drm/amd/display/dc/calcs/dce_calcs: Move some large variables from the stack to the heap

Lee Jones lee.jones at linaro.org
Mon Jan 11 19:18:59 UTC 2021


Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c: In function ‘calculate_bandwidth’:
 drivers/gpu/drm/amd/amdgpu/../display/dc/calcs/dce_calcs.c:2016:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]

Cc: Harry Wentland <harry.wentland at amd.com>
Cc: Leo Li <sunpeng.li at amd.com>
Cc: Alex Deucher <alexander.deucher at amd.com>
Cc: "Christian König" <christian.koenig at amd.com>
Cc: David Airlie <airlied at linux.ie>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: Colin Ian King <colin.king at canonical.com>
Cc: amd-gfx at lists.freedesktop.org
Cc: dri-devel at lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
 .../gpu/drm/amd/display/dc/calcs/dce_calcs.c  | 21 +++++++++++++++----
 1 file changed, 17 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c b/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
index 158d927c03e55..a0c69fae40ced 100644
--- a/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
+++ b/drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
@@ -98,16 +98,16 @@ static void calculate_bandwidth(
 	int32_t num_cursor_lines;
 
 	int32_t i, j, k;
-	struct bw_fixed yclk[3];
-	struct bw_fixed sclk[8];
+	struct bw_fixed *yclk;
+	struct bw_fixed *sclk;
 	bool d0_underlay_enable;
 	bool d1_underlay_enable;
 	bool fbc_enabled;
 	bool lpt_enabled;
 	enum bw_defines sclk_message;
 	enum bw_defines yclk_message;
-	enum bw_defines tiling_mode[maximum_number_of_surfaces];
-	enum bw_defines surface_type[maximum_number_of_surfaces];
+	enum bw_defines *tiling_mode;
+	enum bw_defines *surface_type;
 	enum bw_defines voltage;
 	enum bw_defines pipe_check;
 	enum bw_defines hsr_check;
@@ -122,6 +122,14 @@ static void calculate_bandwidth(
 	int32_t number_of_displays_enabled_with_margin = 0;
 	int32_t number_of_aligned_displays_with_no_margin = 0;
 
+	yclk = kzalloc(sizeof(*yclk) * 3, GFP_KERNEL);
+	sclk = kzalloc(sizeof(*sclk) * 8, GFP_KERNEL);
+
+	tiling_mode = kzalloc(sizeof(*tiling_mode) *
+			      maximum_number_of_surfaces, GFP_KERNEL);
+	surface_type = kzalloc(sizeof(*surface_type) *
+			       maximum_number_of_surfaces, GFP_KERNEL);
+
 	yclk[low] = vbios->low_yclk;
 	yclk[mid] = vbios->mid_yclk;
 	yclk[high] = vbios->high_yclk;
@@ -2013,6 +2021,11 @@ static void calculate_bandwidth(
 			}
 		}
 	}
+
+	kfree(tiling_mode);
+	kfree(surface_type);
+	kfree(yclk);
+	kfree(sclk);
 }
 
 /*******************************************************************************
-- 
2.25.1



More information about the dri-devel mailing list