[PATCH v3 4/6] dt-bindings: display: rockchip: dw-hdmi: Convert binding to YAML
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Jan 11 23:09:50 UTC 2021
Hi Rob,
On Mon, Jan 11, 2021 at 05:01:36PM -0600, Rob Herring wrote:
> On Wed, Jan 06, 2021 at 05:17:55PM +0200, Laurent Pinchart wrote:
> > Hi Rob,
> >
> > Given that the maintainers property is mandatory in the schema, what's
> > the procedure when no maintainer steps up for a converter YAML binding ?
>
> Delete it if no one cares...
>
> Typically we just put a subsystem or platform maintainer.
Do you mean dropping dw_hdmi-rockchip.txt completely, even if it's in
use by a driver ?
> > On Tue, Jan 05, 2021 at 08:08:16AM +0200, Laurent Pinchart wrote:
> > > Convert the Rockchip HDMI TX text binding to YAML.
> > >
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > > ---
> > > Changes since v2:
> > >
> > > - Use Mark's @gmail.com e-mail address as the @rock-chips.com address
> > > bounces
> > >
> > > Changes since v1:
> > >
> > > - Drop pinctrl-0 and pinctrl-1
> > > - Use unevaluatedProperties instead of additionalProperties
> > > - Drop reg and interrupts as they're checked in the base schema
> > > - Rebase on top of OF graph schema, dropped redundant properties
> > > - Fix identation for enum entries
> > > - Tidy up clock names
> > > ---
> > > .../display/rockchip/dw_hdmi-rockchip.txt | 74 --------
> > > .../display/rockchip/rockchip,dw-hdmi.yaml | 158 ++++++++++++++++++
> > > 2 files changed, 158 insertions(+), 74 deletions(-)
> > > delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > > create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > > deleted file mode 100644
> > > index 3d32ce137e7f..000000000000
> > > --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > > +++ /dev/null
> > > @@ -1,74 +0,0 @@
> > > -Rockchip DWC HDMI TX Encoder
> > > -============================
> > > -
> > > -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > > -with a companion PHY IP.
> > > -
> > > -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> > > -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
> > > -following device-specific properties.
> > > -
> > > -
> > > -Required properties:
> > > -
> > > -- compatible: should be one of the following:
> > > - "rockchip,rk3228-dw-hdmi"
> > > - "rockchip,rk3288-dw-hdmi"
> > > - "rockchip,rk3328-dw-hdmi"
> > > - "rockchip,rk3399-dw-hdmi"
> > > -- reg: See dw_hdmi.txt.
> > > -- reg-io-width: See dw_hdmi.txt. Shall be 4.
> > > -- interrupts: HDMI interrupt number
> > > -- clocks: See dw_hdmi.txt.
> > > -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> > > -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
> > > - corresponding to the video input of the controller. The port shall have two
> > > - endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
> > > -- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
> > > -
> > > -Optional properties
> > > -
> > > -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
> > > - or the functionally-reduced I2C master contained in the DWC HDMI. When
> > > - connected to a system I2C master this property contains a phandle to that
> > > - I2C master controller.
> > > -- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
> > > -- clock-names: May contain "cec" as defined in dw_hdmi.txt.
> > > -- clock-names: May contain "grf", power for grf io.
> > > -- clock-names: May contain "vpll", external clock for some hdmi phy.
> > > -- phys: from general PHY binding: the phandle for the PHY device.
> > > -- phy-names: Should be "hdmi" if phys references an external phy.
> > > -
> > > -Optional pinctrl entry:
> > > -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
> > > - will switch to the unwedge pinctrl state for 10ms if it ever gets an
> > > - i2c timeout. It's intended that this unwedge pinctrl entry will
> > > - cause the SDA line to be driven low to work around a hardware
> > > - errata.
> > > -
> > > -Example:
> > > -
> > > -hdmi: hdmi at ff980000 {
> > > - compatible = "rockchip,rk3288-dw-hdmi";
> > > - reg = <0xff980000 0x20000>;
> > > - reg-io-width = <4>;
> > > - ddc-i2c-bus = <&i2c5>;
> > > - rockchip,grf = <&grf>;
> > > - interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > > - clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > > - clock-names = "iahb", "isfr";
> > > - ports {
> > > - hdmi_in: port {
> > > - #address-cells = <1>;
> > > - #size-cells = <0>;
> > > - hdmi_in_vopb: endpoint at 0 {
> > > - reg = <0>;
> > > - remote-endpoint = <&vopb_out_hdmi>;
> > > - };
> > > - hdmi_in_vopl: endpoint at 1 {
> > > - reg = <1>;
> > > - remote-endpoint = <&vopl_out_hdmi>;
> > > - };
> > > - };
> > > - };
> > > -};
> > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > > new file mode 100644
> > > index 000000000000..d3b2f87f152a
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > > @@ -0,0 +1,158 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Rockchip DWC HDMI TX Encoder
> > > +
> > > +maintainers:
> > > + - Mark Yao <markyao0591 at gmail.com>
> > > +
> > > +description: |
> > > + The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > > + with a companion PHY IP.
> > > +
> > > +allOf:
> > > + - $ref: ../bridge/synopsys,dw-hdmi.yaml#
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - rockchip,rk3228-dw-hdmi
> > > + - rockchip,rk3288-dw-hdmi
> > > + - rockchip,rk3328-dw-hdmi
> > > + - rockchip,rk3399-dw-hdmi
> > > +
> > > + reg-io-width:
> > > + const: 4
> > > +
> > > + clocks:
> > > + minItems: 2
> > > + maxItems: 5
> > > + items:
> > > + - {}
> > > + - {}
> > > + # The next three clocks are all optional, but shall be specified in this
> > > + # order when present.
> > > + - description: The HDMI CEC controller main clock
> > > + - description: Power for GRF IO
> > > + - description: External clock for some HDMI PHY
> > > +
> > > + clock-names:
> > > + minItems: 2
> > > + maxItems: 5
> > > + items:
> > > + - {}
> > > + - {}
> > > + - enum:
> > > + - cec
> > > + - grf
> > > + - vpll
> > > + - enum:
> > > + - grf
> > > + - vpll
> > > + - const: vpll
> > > +
> > > + ddc-i2c-bus:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description:
> > > + The HDMI DDC bus can be connected to either a system I2C master or the
> > > + functionally-reduced I2C master contained in the DWC HDMI. When connected
> > > + to a system I2C master this property contains a phandle to that I2C
> > > + master controller.
> > > +
> > > + phys:
> > > + maxItems: 1
> > > + description: The HDMI PHY
> > > +
> > > + phy-names:
> > > + const: hdmi
> > > +
> > > + pinctrl-names:
> > > + description:
> > > + The unwedge pinctrl entry shall drive the DDC SDA line low. This is
> > > + intended to work around a hardware errata that can cause the DDC I2C
> > > + bus to be wedged.
> > > + items:
> > > + - const: default
> > > + - const: unwedge
> > > +
> > > + ports:
> > > + $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > + properties:
> > > + port:
> > > + $ref: /schemas/graph.yaml#/$defs/port-base
> > > + unevaluatedProperties: false
> > > + description: Input of the DWC HDMI TX
> > > +
> > > + properties:
> > > + endpoint at 0:
> > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > > + unevaluatedProperties: false
> > > + description: Connection to the VOPB
> > > +
> > > + endpoint at 1:
> > > + $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > > + unevaluatedProperties: false
> > > + description: Connection to the VOPL
> > > +
> > > + required:
> > > + - endpoint at 0
> > > + - endpoint at 1
> > > +
> > > + required:
> > > + - port
> > > +
> > > + rockchip,grf:
> > > + $ref: /schemas/types.yaml#/definitions/phandle
> > > + description:
> > > + phandle to the GRF to mux vopl/vopb.
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - reg-io-width
> > > + - clocks
> > > + - clock-names
> > > + - interrupts
> > > + - ports
> > > + - rockchip,grf
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/clock/rk3288-cru.h>
> > > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > + #include <dt-bindings/interrupt-controller/irq.h>
> > > +
> > > + hdmi: hdmi at ff980000 {
> > > + compatible = "rockchip,rk3288-dw-hdmi";
> > > + reg = <0xff980000 0x20000>;
> > > + reg-io-width = <4>;
> > > + ddc-i2c-bus = <&i2c5>;
> > > + rockchip,grf = <&grf>;
> > > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > > + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > > + clock-names = "iahb", "isfr";
> > > +
> > > + ports {
> > > + port {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + hdmi_in_vopb: endpoint at 0 {
> > > + reg = <0>;
> > > + remote-endpoint = <&vopb_out_hdmi>;
> > > + };
> > > + hdmi_in_vopl: endpoint at 1 {
> > > + reg = <1>;
> > > + remote-endpoint = <&vopl_out_hdmi>;
> > > + };
> > > + };
> > > + };
> > > + };
> > > +
> > > +...
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list