[PATCH] drm/panfrost: Use delayed timer as default in devfreq profile

[Steven Price]

On 05/01/2021 16:41, Lukasz Luba wrote:
> Devfreq framework supports 2 modes for monitoring devices.
> Use delayed timer as default instead of deferrable timer
> in order to monitor the GPU status regardless of CPU idle.
> 
> Signed-off-by: Lukasz Luba <lukasz.luba at arm.com>

Looks reasonable to me.

Reviewed-by: Steven Price <steven.price at arm.com>

I'll apply to drm-misc-next.

> ---
> Hi all,
> 
> This is just a simple change but has impact on reliable polling mode
> with guaranteed sampling rate. The devfreq framework has 2 modes for
> checking the device status which updates the statistics. When the
> default mode is used (deferred work) it could happen that the
> framework won't check the device, if the CPU which was running devfreq
> code went idle. In deferred mode, the deferred timer is not fired,
> thus framework won't check the device status.
> 
> The log below is taken when glxgears was running. It can be seen that
> periodic checks are missing (should be every 50ms).
> 
> ----------------------------------------------------------------------
> 
> [  128.046555] panfrost ff9a0000.gpu: busy 18029406 total 67940380 26 % freq 200 MHz
> [  128.110538] panfrost ff9a0000.gpu: busy 7975930 total 63980997 12 % freq 200 MHz
> [  128.210606] panfrost ff9a0000.gpu: busy 21148792 total 100074440 21 % freq 200 MHz
> [  128.594638] panfrost ff9a0000.gpu: busy 53739467 total 384032219 13 % freq 200 MHz
> [  129.178749] panfrost ff9a0000.gpu: busy 89206245 total 584111500 15 % freq 200 MHz
> [  129.294601] panfrost ff9a0000.gpu: busy 16446118 total 115852915 14 % freq 200 MHz
> [  129.762616] panfrost ff9a0000.gpu: busy 71481587 total 468015722 15 % freq 200 MHz
> [  129.874762] panfrost ff9a0000.gpu: busy 15614112 total 112139938 13 % freq 200 MHz
> [  130.026585] panfrost ff9a0000.gpu: busy 21397620 total 151821546 14 % freq 200 MHz
> [  130.110536] panfrost ff9a0000.gpu: busy 21429365 total 83952016 25 % freq 200 MHz
> [  130.178524] panfrost ff9a0000.gpu: busy 16458197 total 67989072 24 % freq 200 MHz
> [  130.246528] panfrost ff9a0000.gpu: busy 9876225 total 68004030 14 % freq 200 MHz
> [  130.310529] panfrost ff9a0000.gpu: busy 9211725 total 64000524 14 % freq 200 MHz
> [  130.410528] panfrost ff9a0000.gpu: busy 21780828 total 99999250 21 % freq 200 MHz
> 
> ----------------------------------------------------------------------
> 
> It has impact on devfreq cooling and thermal governor. They rely on these
> statistics, but sometimes the data is stale.
> 
> This patch switches to more reliable devfreq mode, which uses delayed work.
> 
> Regards,
> Lukasz
> 
> 
>   drivers/gpu/drm/panfrost/panfrost_devfreq.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index f44d28fad085..56b3f5935703 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -76,6 +76,7 @@ static int panfrost_devfreq_get_dev_status(struct device *dev,
>   }
>   
>   static struct devfreq_dev_profile panfrost_devfreq_profile = {
> +	.timer = DEVFREQ_TIMER_DELAYED,
>   	.polling_ms = 50, /* ~3 frames */
>   	.target = panfrost_devfreq_target,
>   	.get_dev_status = panfrost_devfreq_get_dev_status,
>