[PATCH v4 1/7] ARM: dts: imx6q(dl): Move 'port' nodes under 'ports' for HDMI encoder

[Laurent Pinchart]

In preparation for the conversion of the DWC HDMI TX device tree
bindings to YAML, move the HDMI encoder's 'port' nodes under a 'ports'
node. The 'ports' node is optional in the OF graph implementation, but
YAML bindings require it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
---
 arch/arm/boot/dts/imx6q.dtsi   | 20 +++++++++++---------
 arch/arm/boot/dts/imx6qdl.dtsi | 25 ++++++++++++++-----------
 2 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 5277e3903291..8d209c1b3ca7 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -406,19 +406,21 @@ ipu2_csi1_mux_to_ipu2_csi1: endpoint {
 &hdmi {
 	compatible = "fsl,imx6q-hdmi";
 
-	port at 2 {
-		reg = <2>;
+	ports {
+		port at 2 {
+			reg = <2>;
 
-		hdmi_mux_2: endpoint {
-			remote-endpoint = <&ipu2_di0_hdmi>;
+			hdmi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_hdmi>;
+			};
 		};
-	};
 
-	port at 3 {
-		reg = <3>;
+		port at 3 {
+			reg = <3>;
 
-		hdmi_mux_3: endpoint {
-			remote-endpoint = <&ipu2_di1_hdmi>;
+			hdmi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_hdmi>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 6f59a99cbe82..82e01ce026ea 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -182,8 +182,6 @@ gpmi: nand-controller at 112000 {
 		};
 
 		hdmi: hdmi at 120000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
 			reg = <0x00120000 0x9000>;
 			interrupts = <0 115 0x04>;
 			gpr = <&gpr>;
@@ -192,19 +190,24 @@ hdmi: hdmi at 120000 {
 			clock-names = "iahb", "isfr";
 			status = "disabled";
 
-			port at 0 {
-				reg = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-				hdmi_mux_0: endpoint {
-					remote-endpoint = <&ipu1_di0_hdmi>;
+				port at 0 {
+					reg = <0>;
+
+					hdmi_mux_0: endpoint {
+						remote-endpoint = <&ipu1_di0_hdmi>;
+					};
 				};
-			};
 
-			port at 1 {
-				reg = <1>;
+				port at 1 {
+					reg = <1>;
 
-				hdmi_mux_1: endpoint {
-					remote-endpoint = <&ipu1_di1_hdmi>;
+					hdmi_mux_1: endpoint {
+						remote-endpoint = <&ipu1_di1_hdmi>;
+					};
 				};
 			};
 		};
-- 
Regards,

Laurent Pinchart