[PATCH v3 1/3] dt-bindings: display: mxsfb: Convert binding to YAML
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Fri Jan 15 22:23:02 UTC 2021
Convert the mxsfb binding to YAML. The deprecated binding is dropped, as
neither the DT sources nor the driver support it anymore. The converted
binding is named fsl,lcdif.yaml to match the usual bindings naming
scheme.
The compatible strings are messy, and DT sources use different kinds of
combination of documented and undocumented values. Keep it simple for
now, and update the example to make it valid. Aligning the binding with
the existing DT sources will be performed separately.
Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
Reviewed-by: Rob Herring <robh at kernel.org>
--
Changes since v2:
- Use OF graph schema
Changes since v1:
- Drop unneeded quotes in string
- Replace minItems with maxItems in conditional check
- Add blank line before ...
- Squash the rename in this commit
---
.../bindings/display/fsl,lcdif.yaml | 101 ++++++++++++++++++
.../devicetree/bindings/display/mxsfb.txt | 87 ---------------
MAINTAINERS | 2 +-
3 files changed, 102 insertions(+), 88 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/fsl,lcdif.yaml
delete mode 100644 Documentation/devicetree/bindings/display/mxsfb.txt
diff --git a/Documentation/devicetree/bindings/display/fsl,lcdif.yaml b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
new file mode 100644
index 000000000000..bbd47d80d253
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,lcdif.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,lcdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale/NXP i.MX LCD Interface (LCDIF)
+
+maintainers:
+ - Marek Vasut <marex at denx.de>
+ - Stefan Agner <stefan at agner.ch>
+
+description: |
+ (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs.
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-lcdif
+ - fsl,imx28-lcdif
+ - fsl,imx6sx-lcdif
+ - fsl,imx8mq-lcdif
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Pixel clock
+ - description: Bus clock
+ - description: Display AXI clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: pix
+ - const: axi
+ - const: disp_axi
+ minItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: The LCDIF output port
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+ - port
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: fsl,imx6sx-lcdif
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 3
+ clock-names:
+ minItems: 2
+ maxItems: 3
+ required:
+ - clock-names
+ else:
+ properties:
+ clocks:
+ maxItems: 1
+ clock-names:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6sx-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ display-controller at 2220000 {
+ compatible = "fsl,imx6sx-lcdif";
+ reg = <0x02220000 0x4000>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
+ <&clks IMX6SX_CLK_LCDIF_APB>,
+ <&clks IMX6SX_CLK_DISPLAY_AXI>;
+ clock-names = "pix", "axi", "disp_axi";
+
+ port {
+ endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
deleted file mode 100644
index c985871c46b3..000000000000
--- a/Documentation/devicetree/bindings/display/mxsfb.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale MXS LCD Interface (LCDIF)
-
-New bindings:
-=============
-Required properties:
-- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
- Should be "fsl,imx28-lcdif" for i.MX28.
- Should be "fsl,imx6sx-lcdif" for i.MX6SX.
- Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
-- reg: Address and length of the register set for LCDIF
-- interrupts: Should contain LCDIF interrupt
-- clocks: A list of phandle + clock-specifier pairs, one for each
- entry in 'clock-names'.
-- clock-names: A list of clock names. For MXSFB it should contain:
- - "pix" for the LCDIF block clock
- - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
-
-Required sub-nodes:
- - port: The connection to an encoder chip.
-
-Example:
-
- lcdif1: display-controller at 2220000 {
- compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
- reg = <0x02220000 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
- <&clks IMX6SX_CLK_LCDIF_APB>,
- <&clks IMX6SX_CLK_DISPLAY_AXI>;
- clock-names = "pix", "axi", "disp_axi";
-
- port {
- parallel_out: endpoint {
- remote-endpoint = <&panel_in_parallel>;
- };
- };
- };
-
-Deprecated bindings:
-====================
-Required properties:
-- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
- Should be "fsl,imx28-lcdif" for i.MX28.
-- reg: Address and length of the register set for LCDIF
-- interrupts: Should contain LCDIF interrupts
-- display: phandle to display node (see below for details)
-
-* display node
-
-Required properties:
-- bits-per-pixel: <16> for RGB565, <32> for RGB888/666.
-- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>.
-
-Required sub-node:
-- display-timings: Refer to binding doc display-timing.txt for details.
-
-Examples:
-
-lcdif at 80030000 {
- compatible = "fsl,imx28-lcdif";
- reg = <0x80030000 2000>;
- interrupts = <38 86>;
-
- display: display {
- bits-per-pixel = <32>;
- bus-width = <24>;
-
- display-timings {
- native-mode = <&timing0>;
- timing0: timing0 {
- clock-frequency = <33500000>;
- hactive = <800>;
- vactive = <480>;
- hfront-porch = <164>;
- hback-porch = <89>;
- hsync-len = <10>;
- vback-porch = <23>;
- vfront-porch = <10>;
- vsync-len = <10>;
- hsync-active = <0>;
- vsync-active = <0>;
- de-active = <1>;
- pixelclk-active = <0>;
- };
- };
- };
-};
diff --git a/MAINTAINERS b/MAINTAINERS
index d082757ca672..9d241b832aae 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12180,7 +12180,7 @@ M: Stefan Agner <stefan at agner.ch>
L: dri-devel at lists.freedesktop.org
S: Supported
T: git git://anongit.freedesktop.org/drm/drm-misc
-F: Documentation/devicetree/bindings/display/mxsfb.txt
+F: Documentation/devicetree/bindings/display/fsl,lcdif.yaml
F: drivers/gpu/drm/mxsfb/
MYLEX DAC960 PCI RAID Controller
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list