[PATCH v6 5/6] drm/imx: Introduce i.MX8qm/qxp DPU DRM
Laurentiu Palcu
laurentiu.palcu at oss.nxp.com
Mon Jan 25 13:48:06 UTC 2021
Hi Liu Ying,
Just some minor comments below.
On Thu, Jan 21, 2021 at 03:14:22PM +0800, Liu Ying wrote:
> This patch introduces i.MX8qm/qxp Display Processing Unit(DPU) DRM support.
>
> DPU is comprised of two main components that include a blit engine for
> 2D graphics accelerations(with composition support) and a display controller
> for display output processing, as well as a command sequencer. Outside of
> DPU, optional prefetch engines, a.k.a, Prefetch Resolve Gasket(PRG) and
> Display Prefetch Resolve(DPR), can fetch data from memory prior to some DPU
> fetchunits of blit engine and display controller. The prefetch engines
> support reading linear formats and resolving Vivante GPU tile formats.
>
> This patch adds kernel modesetting support for the display controller part.
> The driver supports two CRTCs per display controller, planes backed by
> four fetchunits(decode0/1, fetchlayer, fetchwarp), fetchunit allocation
> logic for the two CRTCs, prefetch engines(with tile resolving supported),
> plane upscaling/deinterlacing/yuv2rgb CSC/alpha blending and CRTC gamma
> correction. The registers of the controller is accessed without command
> sequencer involved, instead just by using CPU.
>
> Reference manual can be found at:
> https://www.nxp.com/webapp/Download?colCode=IMX8DQXPRM
>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v5->v6:
> * Do not use macros where possible. (Laurentiu)
> * Break dpu_plane_atomic_check() into some smaller functions. (Laurentiu)
> * Address some minor comments from Laurentiu.
> * Add dpu_crtc_err() helper marco to tell dmesg which CRTC generates error.
> * Drop calling dev_set_drvdata() from dpu_drm_bind/unbind() as it is done
> in dpu_drm_probe().
> * Some trivial tweaks.
>
> v4->v5:
> * Rebase up onto the latest drm-misc-next branch and remove the hook to
> drm_atomic_helper_legacy_gamma_set(), because it was dropped by the newly
> landed commit 'drm: automatic legacy gamma support'.
> * Remove a redundant blank line from dpu_plane_atomic_update().
>
> v3->v4:
> * No change.
>
> v2->v3:
> * Fix build warnings Reported-by: kernel test robot <lkp at intel.com>.
> * Drop build dependency on IMX_SCU, as dummy SCU functions have been added in
> header files by the patch 'firmware: imx: add dummy functions' which has
> landed in linux-next/master branch.
>
> v1->v2:
> * Add compatible for i.MX8qm DPU, as this is tested with i.MX8qm LVDS displays.
> (Laurentiu)
> * Fix PRG burst size and stride. (Laurentiu)
> * Put 'ports' OF node to fix the bail-out logic in dpu_drm_probe(). (Laurentiu)
>
> drivers/gpu/drm/imx/Kconfig | 1 +
> drivers/gpu/drm/imx/Makefile | 1 +
> drivers/gpu/drm/imx/dpu/Kconfig | 10 +
> drivers/gpu/drm/imx/dpu/Makefile | 10 +
> drivers/gpu/drm/imx/dpu/dpu-constframe.c | 171 +++++
> drivers/gpu/drm/imx/dpu/dpu-core.c | 1094 +++++++++++++++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-crtc.c | 967 +++++++++++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-crtc.h | 66 ++
> drivers/gpu/drm/imx/dpu/dpu-disengcfg.c | 117 +++
> drivers/gpu/drm/imx/dpu/dpu-dprc.c | 718 +++++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-dprc.h | 40 ++
> drivers/gpu/drm/imx/dpu/dpu-drv.c | 292 ++++++++
> drivers/gpu/drm/imx/dpu/dpu-drv.h | 28 +
> drivers/gpu/drm/imx/dpu/dpu-extdst.c | 299 ++++++++
> drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c | 294 ++++++++
> drivers/gpu/drm/imx/dpu/dpu-fetcheco.c | 224 ++++++
> drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c | 154 ++++
> drivers/gpu/drm/imx/dpu/dpu-fetchunit.c | 609 ++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-fetchunit.h | 191 +++++
> drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c | 250 +++++++
> drivers/gpu/drm/imx/dpu/dpu-framegen.c | 395 +++++++++++
> drivers/gpu/drm/imx/dpu/dpu-gammacor.c | 223 ++++++
> drivers/gpu/drm/imx/dpu/dpu-hscaler.c | 275 ++++++++
> drivers/gpu/drm/imx/dpu/dpu-kms.c | 540 ++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-kms.h | 23 +
> drivers/gpu/drm/imx/dpu/dpu-layerblend.c | 348 +++++++++
> drivers/gpu/drm/imx/dpu/dpu-plane.c | 799 +++++++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-plane.h | 56 ++
> drivers/gpu/drm/imx/dpu/dpu-prg.c | 433 ++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-prg.h | 45 ++
> drivers/gpu/drm/imx/dpu/dpu-prv.h | 233 ++++++
> drivers/gpu/drm/imx/dpu/dpu-tcon.c | 250 +++++++
> drivers/gpu/drm/imx/dpu/dpu-vscaler.c | 308 ++++++++
> drivers/gpu/drm/imx/dpu/dpu.h | 385 ++++++++++
> 34 files changed, 9849 insertions(+)
> create mode 100644 drivers/gpu/drm/imx/dpu/Kconfig
> create mode 100644 drivers/gpu/drm/imx/dpu/Makefile
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-constframe.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-core.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-disengcfg.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-extdst.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetcheco.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-framegen.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-gammacor.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-hscaler.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-layerblend.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prv.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-tcon.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-vscaler.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu.h
>
[...]
> diff --git a/drivers/gpu/drm/imx/dpu/dpu-core.c b/drivers/gpu/drm/imx/dpu/dpu-core.c
> new file mode 100644
> index 00000000..7dab6cc
> --- /dev/null
> +++ b/drivers/gpu/drm/imx/dpu/dpu-core.c
[...]
> +static int dpu_get_irqs(struct platform_device *pdev, struct dpu_soc *dpu)
> +{
> + unsigned int i, j;
> +
> + /* do not get the reserved irq */
> + for (i = 0, j = 0; i < DPU_IRQ_COUNT - 1; i++, j++) {
> + if (i == DPU_IRQ_RESERVED)
> + j++;
> +
> + dpu->irq[j] = platform_get_irq(pdev, i);
> + if (dpu->irq[j] < 0) {
> + dev_err_probe(dpu->dev, dpu->irq[j],
> + "failed to get irq\n");
> + return dpu->irq[i];
I think you want 'return dpu->irq[j]'.
> + }
> + }
> +
> + return 0;
> +}
[...]
> +static const struct dpu_irq_handler_map {
> + void (*handler)(struct irq_desc *desc);
> +} dpu_irq_handler_maps[DPU_IRQ_COUNT] = {
> + {}, /* 0 */
> + {}, /* 1 */
> + {}, /* 2 */
> + {dpu_extdst0_shdload_irq_handler}, /* 3 */
> + {}, /* 4 */
> + {}, /* 5 */
> + {dpu_extdst4_shdload_irq_handler}, /* 6 */
> + {}, /* 7 */
> + {}, /* 8 */
> + {dpu_extdst1_shdload_irq_handler}, /* 9 */
> + {}, /* 10 */
> + {}, /* 11 */
> + {dpu_extdst5_shdload_irq_handler}, /* 12 */
> + {}, /* 13 */
> + {}, /* 14 */
> + {dpu_disengcfg_shdload0_irq_handler}, /* 15 */
> + {dpu_disengcfg_framecomplete0_irq_handler}, /* 16 */
> + {dpu_disengcfg_seqcomplete0_irq_handler}, /* 17 */
> + {}, /* 18 */
> + {}, /* 19 */
> + {}, /* 20 */
> + {}, /* 21 */
> + {}, /* 22 */
> + {}, /* 23 */
> + {}, /* 24 */
> + {dpu_disengcfg_shdload1_irq_handler}, /* 25 */
> + {dpu_disengcfg_framecomplete1_irq_handler}, /* 26 */
> + {dpu_disengcfg_seqcomplete1_irq_handler}, /* 27 */
> + {}, /* 28 */
> + {}, /* 29 */
> + {}, /* 30 */
> + {}, /* 31 */
> + {}, /* 32 */
> + {}, /* 33 */
> + {}, /* 34 */
> + {/* reserved */}, /* 35 */
> + {}, /* 36 */
> + {}, /* 37 */
> + {}, /* 38 */
> + {}, /* 39 */
> + {}, /* 40 */
> + {}, /* 41 */
> + {}, /* 42 */
> + {}, /* 43 */
> + {}, /* 44 */
> + {}, /* 45 */
> + {}, /* 46 */
> + {}, /* 47 */
> + {}, /* 48 */
> +};
Why not make this an array of pointers to functions. Do we need a struct?
Something like:
static void (* const dpu_irq_handler[DPU_IRQ_COUNT])(struct irq_desc *) = {
[3] = dpu_extdst0_shdload_irq_handler,
[6] = dpu_extdst4_shdload_irq_handler,
...
};
[...]
> +static int
> +dpu_get_fetchunits_for_plane_grp(struct dpu_soc *dpu,
> + const struct dpu_units *us,
> + struct dpu_fetchunit ***fu,
> + unsigned int *cnt,
> + struct dpu_fetchunit *
> + (*get)(struct dpu_soc *dpu,
> + unsigned int id))
> +{
> + unsigned int fu_cnt = 0;
> + int i, j, ret;
> +
> + for (i = 0; i < us->cnt; i++) {
> + if (us->types[i] == DPU_DISP)
> + fu_cnt++;
> + }
> +
> + *cnt = fu_cnt;
> +
> + *fu = devm_kcalloc(dpu->dev, fu_cnt, sizeof(**fu), GFP_KERNEL);
> + if (!(*fu))
> + return -ENOMEM;
> +
> + for (i = 0, j = 0; i < us->cnt; i++) {
> + if (us->types[i] != DPU_DISP)
> + continue;
> +
> + (*fu)[j] = (*get)(dpu, us->ids[i]);
You can also call get() directly. No need to dereference function
pointers.
> + if (IS_ERR((*fu)[j])) {
> + ret = PTR_ERR((*fu)[j]);
> + dev_err(dpu->dev, "failed to get %s%d: %d\n",
> + us->name, us->ids[i], ret);
> + return ret;
> + }
> + j++;
> + }
> +
> + return 0;
> +}
[...]
> +static void
> +dpu_put_fetchunits_for_plane_grp(struct dpu_fetchunit ***fu,
> + unsigned int *cnt,
> + void (*put)(struct dpu_fetchunit *fu))
> +{
> + int i;
> +
> + for (i = 0; i < *cnt; i++)
> + (*put)((*fu)[i]);
Same here, you can call put() directly.
> +
> + *cnt = 0;
> +}
Thanks,
laurentiu
More information about the dri-devel
mailing list