[PATCH v3 4/4] drm/ingenic: Fix non-OSD mode

H. Nikolaus Schaller hns at goldelico.com
Mon Jan 25 18:56:46 UTC 2021


Hi Paul,

> Am 24.01.2021 um 10:47 schrieb H. Nikolaus Schaller <hns at goldelico.com>:
> 
> Hi Paul,
> 
>> Am 24.01.2021 um 10:43 schrieb Paul Cercueil <paul at crapouillou.net>:
>> 
>> Hi Nikolaus,
>> 
>> Le dim. 24 janv. 2021 à 10:30, H. Nikolaus Schaller <hns at goldelico.com> a écrit :
>>> Hi Paul,
>>> we observed the same issue on the jz4730 (which is almost identical
>>> to the jz4740 wrt. LCDC) and our solution [1] was simpler.
>>> It leaves the hwdesc f0 and f1 as they are and just takes f1 for really
>>> programming the first DMA descriptor if there is no OSD.
>> 
>> Disagreed. With your solution, it ends up using priv->f1 plane with hwdesc_f0. That's very confusing.
> 
> It is a tradeoff between code simplicity and confusion. Indeed difficult to decide. Fortunately I don't have to :)
> 
>> 
>>> We have tested on jz4730 and jz4780.
>> 
>> Could I get a tested-by then? :)
> 
> I'll test with our tree and test both SoC in the next days and give feedback.

Ok, works on both devices:

a) Skytone Alpha 400 compatible Letux 400 with not-yet-upstream jz4730 and internal panel
b) CI20 with external HDMI (tablet) and our not-yet-upstream HDMI code

So the hwdesc handling is as ok as it was with our patch. I'll keep a copy of yours in our
tree until it arrives upstream.

Tested-by: H. Nikolaus Schaller <hns at goldelico.com>

BR and thanks,
Nikolaus


> 
> BR and thanks,
> Nikolaus
> 
>> 
>> Cheers,
>> -Paul
>> 
>>> Maybe you want to consider that. Then I can officially post it.
>>> [1] https://github.com/goldelico/letux-kernel/commit/3be1de5fdabf2cc1c17f198ded3328cc6e4b9844
>>>> Am 24.01.2021 um 09:55 schrieb Paul Cercueil <paul at crapouillou.net>:
>>>> Even though the JZ4740 did not have the OSD mode, it had (according to
>>>> the documentation) two DMA channels, but there is absolutely no
>>>> information about how to select the second DMA channel.
>>>> Make the ingenic-drm driver work in non-OSD mode by using the
>>>> foreground0 plane (which is bound to the DMA0 channel) as the primary
>>>> plane, instead of the foreground1 plane, which is the primary plane
>>>> when in OSD mode.
>>>> Fixes: 3c9bea4ef32b ("drm/ingenic: Add support for OSD mode")
>>>> Cc: <stable at vger.kernel.org> # v5.8+
>>>> Signed-off-by: Paul Cercueil <paul at crapouillou.net>
>>>> Acked-by: Daniel Vetter <daniel.vetter at ffwll.ch>
>>>> ---
>>>> drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 11 +++++++----
>>>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>>> diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>> index b23011c1c5d9..59ce43862e16 100644
>>>> --- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>> +++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
>>>> @@ -554,7 +554,7 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
>>>> 		height = state->src_h >> 16;
>>>> 		cpp = state->fb->format->cpp[0];
>>>> -		if (priv->soc_info->has_osd && plane->type == DRM_PLANE_TYPE_OVERLAY)
>>>> +		if (!priv->soc_info->has_osd || plane->type == DRM_PLANE_TYPE_OVERLAY)
>>>> 			hwdesc = &priv->dma_hwdescs->hwdesc_f0;
>>>> 		else
>>>> 			hwdesc = &priv->dma_hwdescs->hwdesc_f1;
>>> we just replace this with
>>>               if (priv->soc_info->has_osd && plane->type != DRM_PLANE_TYPE_OVERLAY)
>>>                       hwdesc = &priv->dma_hwdescs->hwdesc_f1;
>>>               else
>>>                       hwdesc = &priv->dma_hwdescs->hwdesc_f0;
>>> and the remainder can stay as is.
>>>> @@ -826,6 +826,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>>>> 	const struct jz_soc_info *soc_info;
>>>> 	struct ingenic_drm *priv;
>>>> 	struct clk *parent_clk;
>>>> +	struct drm_plane *primary;
>>>> 	struct drm_bridge *bridge;
>>>> 	struct drm_panel *panel;
>>>> 	struct drm_encoder *encoder;
>>>> @@ -940,9 +941,11 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>>>> 	if (soc_info->has_osd)
>>>> 		priv->ipu_plane = drm_plane_from_index(drm, 0);
>>>> -	drm_plane_helper_add(&priv->f1, &ingenic_drm_plane_helper_funcs);
>>>> +	primary = priv->soc_info->has_osd ? &priv->f1 : &priv->f0;
>>>> -	ret = drm_universal_plane_init(drm, &priv->f1, 1,
>>>> +	drm_plane_helper_add(primary, &ingenic_drm_plane_helper_funcs);
>>>> +
>>>> +	ret = drm_universal_plane_init(drm, primary, 1,
>>>> 				       &ingenic_drm_primary_plane_funcs,
>>>> 				       priv->soc_info->formats_f1,
>>>> 				       priv->soc_info->num_formats_f1,
>>>> @@ -954,7 +957,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
>>>> 	drm_crtc_helper_add(&priv->crtc, &ingenic_drm_crtc_helper_funcs);
>>>> -	ret = drm_crtc_init_with_planes(drm, &priv->crtc, &priv->f1,
>>>> +	ret = drm_crtc_init_with_planes(drm, &priv->crtc, primary,
>>>> 					NULL, &ingenic_drm_crtc_funcs, NULL);
>>>> 	if (ret) {
>>>> 		dev_err(dev, "Failed to init CRTC: %i\n", ret);
>>>> --
>>>> 2.29.2
>>> BR and thanks,
>>> Nikolaus
>> 
>> 
> 



More information about the dri-devel mailing list