[PATCH 3/5] drm/gma500: Drop DRM_GMA3600 config option

[Thomas Zimmermann]

With support for the MID-related chips removed, only support for
desktop chips is left in the driver. So just build the complete
driver if DRM_GMA500 has been selected. Anyone who wants to enable
the Poulsbo code would probably also want the Cedarview code.

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
 drivers/gpu/drm/gma500/Kconfig   | 13 +++----------
 drivers/gpu/drm/gma500/Makefile  | 25 ++++++++++++-------------
 drivers/gpu/drm/gma500/psb_drv.c |  4 ++--
 3 files changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/gpu/drm/gma500/Kconfig b/drivers/gpu/drm/gma500/Kconfig
index 6f41b88cf076..02de5970d490 100644
--- a/drivers/gpu/drm/gma500/Kconfig
+++ b/drivers/gpu/drm/gma500/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 config DRM_GMA500
-	tristate "Intel GMA5/600 KMS Framebuffer"
+	tristate "Intel GMA500/3600/3650 KMS Framebuffer"
 	depends on DRM && PCI && X86 && MMU
 	select DRM_KMS_HELPER
 	select DRM_TTM
@@ -10,12 +10,5 @@ config DRM_GMA500
 	select INPUT if ACPI
 	help
 	  Say yes for an experimental 2D KMS framebuffer driver for the
-	  Intel GMA500 ('Poulsbo') and other Intel IMG based graphics
-	  devices.
-
-config DRM_GMA3600
-	bool "Intel GMA3600/3650 support (Experimental)"
-	depends on DRM_GMA500
-	help
-	  Say yes to include basic support for Intel GMA3600/3650 (Intel
-	  Cedar Trail) platforms.
+	  Intel GMA500 ('Poulsbo') and Intel GMA3600/3650 (Intel
+	  Cedar Trail).
diff --git a/drivers/gpu/drm/gma500/Makefile b/drivers/gpu/drm/gma500/Makefile
index b33dfef17849..04999757d402 100644
--- a/drivers/gpu/drm/gma500/Makefile
+++ b/drivers/gpu/drm/gma500/Makefile
@@ -6,33 +6,32 @@
 gma500_gfx-y += \
 	  accel_2d.o \
 	  backlight.o \
+	  blitter.o \
+	  cdv_device.o \
+	  cdv_intel_crt.o \
+	  cdv_intel_display.o \
+	  cdv_intel_dp.o \
+	  cdv_intel_hdmi.o \
+	  cdv_intel_lvds.o \
 	  framebuffer.o \
 	  gem.o \
+	  gma_device.o \
+	  gma_display.o \
 	  gtt.o \
 	  intel_bios.o \
-	  intel_i2c.o \
 	  intel_gmbus.o \
+	  intel_i2c.o \
 	  mmu.o \
-	  blitter.o \
 	  power.o \
+	  psb_device.o \
 	  psb_drv.o \
-	  gma_display.o \
-	  gma_device.o \
 	  psb_intel_display.o \
 	  psb_intel_lvds.o \
 	  psb_intel_modes.o \
 	  psb_intel_sdvo.o \
-	  psb_lid.o \
 	  psb_irq.o \
-	  psb_device.o
+	  psb_lid.o
 
 gma500_gfx-$(CONFIG_ACPI) +=  opregion.o \
 
-gma500_gfx-$(CONFIG_DRM_GMA3600) +=  cdv_device.o \
-	  cdv_intel_crt.o \
-	  cdv_intel_display.o \
-	  cdv_intel_hdmi.o \
-	  cdv_intel_lvds.o \
-	  cdv_intel_dp.o
-
 obj-$(CONFIG_DRM_GMA500) += gma500_gfx.o
diff --git a/drivers/gpu/drm/gma500/psb_drv.c b/drivers/gpu/drm/gma500/psb_drv.c
index c3653975a6c4..c396324ff763 100644
--- a/drivers/gpu/drm/gma500/psb_drv.c
+++ b/drivers/gpu/drm/gma500/psb_drv.c
@@ -48,9 +48,10 @@ static int psb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
  *                                  N2800
  */
 static const struct pci_device_id pciidlist[] = {
+	/* Poulsbo */
 	{ 0x8086, 0x8108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
 	{ 0x8086, 0x8109, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &psb_chip_ops },
-#if defined(CONFIG_DRM_GMA3600)
+	/* Cedartrail */
 	{ 0x8086, 0x0be0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
 	{ 0x8086, 0x0be1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
 	{ 0x8086, 0x0be2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
@@ -67,7 +68,6 @@ static const struct pci_device_id pciidlist[] = {
 	{ 0x8086, 0x0bed, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
 	{ 0x8086, 0x0bee, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
 	{ 0x8086, 0x0bef, PCI_ANY_ID, PCI_ANY_ID, 0, 0, (long) &cdv_chip_ops },
-#endif
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, pciidlist);
-- 
2.30.0