[PATCH v12] staging: fbtft: add tearing signal detect

[carlis]

On Fri, 29 Jan 2021 12:23:08 +0200
Andy Shevchenko <andy.shevchenko at gmail.com> wrote:

> On Fri, Jan 29, 2021 at 7:01 AM carlis <zhangxuezhi3 at gmail.com> wrote:
> > On Thu, 28 Jan 2021 16:33:02 +0200
> > Andy Shevchenko <andy.shevchenko at gmail.com> wrote:  
> > > On Thu, Jan 28, 2021 at 2:58 PM Carlis <zhangxuezhi3 at gmail.com>
> > > wrote:
> > >
> > > Thanks for your contribution, my comments below.
> > >  
> > > > From: zhangxuezhi <zhangxuezhi1 at yulong.com>  
> > >
> > > You probably have to configure your Git to use the same account
> > > for author and committer.  
> >
> > hi,you mean like below:
> >         Carlis <zhangxuezhi1 at yulong.com>
> > ?  
> 
> I meant that you shouldn't probably have a From: line in the commit
> message.
> 
> ...
> 
> > hi, i have modified it according to your suggestion like below:  
> 
> Please, go again thru my comments and comments from others and
> carefully address all of them everywhere in your contribution. If you
> have questions, ask them in reply in the corresponding context.
> 
> ...
> 
> > /**
> >  * init_tearing_effect_line() - init tearing effect line  
> 
> >  *  
> 
> For example, above was commented on and hasn't been addressed here.
> 
hi,here i can not get you.....
> >  * @par: FBTFT parameter object
> >  *
> >  * Return: 0 on success, < 0 if error occurred.
> >  */
> > static int init_tearing_effect_line(struct fbtft_par *par)
> > {
> >         struct device *dev = par->info->device;
> >         struct gpio_desc *te;
> >         int rc;
> >
> >         te = gpiod_get_optional(dev, "te", GPIOD_IN);
> >         if (IS_ERR(te))
> >                 return dev_err_probe(dev, PTR_ERR(te), "Failed to
> >         request te GPIO\n");
> >  
> 
> >         if (te) {  
> 
> This one is not like I suggested.
Why? My thinking is that if the TE is not configured and NULL is
returned, the initialization can still proceed.....
> 
> >                 par->irq_te = gpiod_to_irq(te);
> >                 gpiod_put(te);
> >  
> 
> >                 if (par->irq_te) {  
> 
> This is wrong.

Why? i have read gpiod_to_irq code, if an error occurs, a negative
value is returned, and zero is not possible,so I need this value to
determine if TE IRQ is configured

> 
> >                         rc = devm_request_irq(dev,
> >                                               par->irq_te,
> >                 panel_te_handler,
> >                                               IRQF_TRIGGER_RISING,
> >                 "TE_GPIO", par);  
> 
> Try to use less LOCs.
> 
> >                         if (rc)
> >                                 return dev_err_probe(dev, rc, "TE
> > IRQ request failed.\n");
> >
> >                         disable_irq_nosync(par->irq_te);
> >                         init_completion(&par->panel_te);  
> 
> >                 } else {
> >                         return dev_err_probe(dev, par->irq_te,
> > "gpiod to TE IRQ failed.\n");
> >                 }  
> 
> Again, it is not what had been suggested.
> 
> >         }
> >
> >         return 0;
> > }  
> 
> The rest is better, but we will see later on when you submit a new
> version (And I feel it won't be last).
>