[PATCH v2 09/22] drm/msm/dpu: remove dpu_hw_pipe_cdp_cfg from dpu_plane

[Dmitry Baryshkov]

Remove struct dpu_hw_pipe_cdp_cfg instance from dpu_plane, it is an
interim configuration structure. Allocate it on stack instead.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 14 +++++++-------
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h |  2 --
 2 files changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index 6f856aeaf6bc..fdae6520c2bb 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -1162,20 +1162,20 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
 				pstate->multirect_index);
 
 		if (pdpu->pipe_hw->ops.setup_cdp) {
-			struct dpu_hw_pipe_cdp_cfg *cdp_cfg = &pstate->cdp_cfg;
+			struct dpu_hw_pipe_cdp_cfg cdp_cfg;
 
-			memset(cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg));
+			memset(&cdp_cfg, 0, sizeof(struct dpu_hw_pipe_cdp_cfg));
 
-			cdp_cfg->enable = pdpu->catalog->perf.cdp_cfg
+			cdp_cfg.enable = pdpu->catalog->perf.cdp_cfg
 					[DPU_PERF_CDP_USAGE_RT].rd_enable;
-			cdp_cfg->ubwc_meta_enable =
+			cdp_cfg.ubwc_meta_enable =
 					DPU_FORMAT_IS_UBWC(fmt);
-			cdp_cfg->tile_amortize_enable =
+			cdp_cfg.tile_amortize_enable =
 					DPU_FORMAT_IS_UBWC(fmt) ||
 					DPU_FORMAT_IS_TILE(fmt);
-			cdp_cfg->preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64;
+			cdp_cfg.preload_ahead = DPU_SSPP_CDP_PRELOAD_AHEAD_64;
 
-			pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, cdp_cfg);
+			pdpu->pipe_hw->ops.setup_cdp(pdpu->pipe_hw, &cdp_cfg);
 		}
 	}
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
index 3e4ed8a33a3e..48366da5e86e 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h
@@ -23,7 +23,6 @@
  * @multirect_index: index of the rectangle of SSPP
  * @multirect_mode: parallel or time multiplex multirect mode
  * @pending:	whether the current update is still pending
- * @cdp_cfg:	CDP configuration
  * @plane_fetch_bw: calculated BW per plane
  * @plane_clk: calculated clk per plane
  */
@@ -36,7 +35,6 @@ struct dpu_plane_state {
 	uint32_t multirect_mode;
 	bool pending;
 
-	struct dpu_hw_pipe_cdp_cfg cdp_cfg;
 	u64 plane_fetch_bw;
 	u64 plane_clk;
 };
-- 
2.30.2