[PATCH] dma-buf: add kernel count for dma_buf
guangming.cao at mediatek.com
guangming.cao at mediatek.com
Wed Jul 14 12:03:05 UTC 2021
From: Guangming.Cao <guangming.cao at mediatek.com>
On Wed, 2021-07-14 at 12:43 +0200, Christian K鰊ig wrote:
> Am 14.07.21 um 11:44 schrieb guangming.cao at mediatek.com:
> > From: Guangming Cao <Guangming.Cao at mediatek.com>
> >
> > On Wed, 2021-07-14 at 10:46 +0200, Christian K鰊ig wrote:
> > > Am 14.07.21 um 09:11 schrieb guangming.cao at mediatek.com:
> > > > From: Guangming Cao <Guangming.Cao at mediatek.com>
> > > >
> > > > Add a refcount for kernel to prevent UAF(Use After Free) issue.
> > >
> > > Well NAK on so many levels.
> > >
> > > > We can assume a case like below:
> > > > 1. kernel space alloc dma_buf(file count = 1)
> > > > 2. kernel use dma_buf to get fd(file count = 1)
> > > > 3. userspace use fd to do mapping (file count = 2)
> > >
> > > Creating an userspace mapping increases the reference count for
> > > the
> > > underlying file object.
> > >
> > > See the implementation of mmap_region():
> > > ...
> > > vma->vm_file = get_file(file);
> > > error = call_mmap(file, vma);
> > > ...
> > >
> > > What can happen is the the underlying exporter redirects the mmap
> > > to
> > > a
> > > different file, e.g. TTM or GEM drivers do that all the time.
> > >
> > > But this is fine since then the VA mapping is independent of the
> > > DMA-
> > > buf.
> > >
> > > > 4. kernel call dma_buf_put (file count = 1)
> > > > 5. userpsace close buffer fd(file count = 0)
> > > > 6. at this time, buffer is released, but va is valid!!
> > > > So we still can read/write buffer via mmap va,
> > > > it maybe cause memory leak, or kernel exception.
> > > > And also, if we use "ls -ll" to watch corresponding
> > > > process
> > > > fd link info, it also will cause kernel exception.
> > > >
> > > > Another case:
> > > > Using dma_buf_fd to generate more than 1 fd, because
> > > > dma_buf_fd will not increase file count, thus, when
> > > > close
> > > > the second fd, it maybe occurs error.
> > >
> > > Each opened fd will increase the reference count so this is
> > > certainly
> > > not correct what you describe here.
> > >
> > > Regards,
> > > Christian.
> > >
> >
> > Yes, mmap will increase file count by calling get_file, so step[2]
> > ->
> > step[3], file count increase 1.
> >
> > But, dma_buf_fd() will not increase file count.
> > function "dma_buf_fd(struct dma_buf *dmabuf, int flags)" just get
> > an
> > unused fd, via call "get_unused_fd_flags(flags)", and call
> > "fd_install(fd, dmabuf->file)", it will let associated "struct
> > file*"
> > in task's fdt->fd[fd] points to this dma_buf.file, not increase the
> > file count of dma_buf.file.
> > I think this is confusing, I can get more than 1 fds via
> > dma_buf_fd,
> > but they don't need to close it because they don't increase file
> > count.
> >
> > However, dma_buf_put() can decrease file count at kernel side
> > directly.
> > If somebody write a ko to put file count of dma_buf.file many
> > times, it
> > will cause buffer freed earlier than except. At last on Android, I
> > think this is a little bit dangerous.
>
> dma_buf_fd() takes the dma_buf pointer and converts it into a fd. So
> the
> reference is consumed.
>
> That's why users of this interface make sure to get a separate
> reference, see drm_gem_prime_handle_to_fd() for example:
>
> ...
> out_have_handle:
> ret = dma_buf_fd(dmabuf, flags);
> /*
> * We must _not_ remove the buffer from the handle cache since
> the
> newly
> * created dma buf is already linked in the global obj->dma_buf
> pointer,
> * and that is invariant as long as a userspace gem handle
> exists.
> * Closing the handle will clean out the cache anyway, so we
> don't
> leak.
> */
> if (ret < 0) {
> goto fail_put_dmabuf;
> } else {
> *prime_fd = ret;
> ret = 0;
> }
>
> goto out;
>
> fail_put_dmabuf:
> dma_buf_put(dmabuf);
> out:
> ...
>
> You could submit a patch to improve the documentation and explicitly
> note on dma_buf_fd() that the reference is consumed, but all of this
> is
> working perfectly fine.
>
> Regards,
> Christian.
>
Thanks for your reply!
Yes, drm works fine because it fully understand what dma-buf api will
do. Improve the documentation is really good idea to prevent this case.
But, what I can't understand is, for kernel api exported to
corresponding users, we don't need to ensure all api is safe?
And for general cases, dma-buf framework also need to prevent this
case, isn't it, it will make dma-buf framework more strong?
BRs!
Guangming
> >
> > > > Solution:
> > > > Add a kernel count for dma_buf, and make sure the file
> > > > count
> > > > of dma_buf.file hold by kernel is 1.
> > > >
> > > > Notes: For this solution, kref couldn't work because kernel ref
> > > > maybe added from 0, but kref don't allow it.
> > > >
> > > > Signed-off-by: Guangming Cao <Guangming.Cao at mediatek.com>
> > > > ---
> > > > drivers/dma-buf/dma-buf.c | 23 +++++++++++++++++++----
> > > > include/linux/dma-buf.h | 6 ++++--
> > > > 2 files changed, 23 insertions(+), 6 deletions(-)
> > > >
> > > > diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-
> > > > buf.c
> > > > index 511fe0d217a0..04ee92aac8b9 100644
> > > > --- a/drivers/dma-buf/dma-buf.c
> > > > +++ b/drivers/dma-buf/dma-buf.c
> > > > @@ -62,6 +62,7 @@ static void dma_buf_release(struct dentry
> > > > *dentry)
> > > > if (unlikely(!dmabuf))
> > > > return;
> > > >
> > > > + WARN_ON(atomic64_read(&dmabuf->kernel_ref));
> > > > BUG_ON(dmabuf->vmapping_counter);
> > > >
> > > > /*
> > > > @@ -555,6 +556,7 @@ struct dma_buf *dma_buf_export(const struct
> > > > dma_buf_export_info *exp_info)
> > > > goto err_module;
> > > > }
> > > >
> > > > + atomic64_set(&dmabuf->kernel_ref, 1);
> > > > dmabuf->priv = exp_info->priv;
> > > > dmabuf->ops = exp_info->ops;
> > > > dmabuf->size = exp_info->size;
> > > > @@ -617,6 +619,9 @@ int dma_buf_fd(struct dma_buf *dmabuf, int
> > > > flags)
> > > >
> > > > fd_install(fd, dmabuf->file);
> > > >
> > > > + /* Add file cnt for each new fd */
> > > > + get_file(dmabuf->file);
> > > > +
> > > > return fd;
> > > > }
> > > > EXPORT_SYMBOL_GPL(dma_buf_fd);
> > > > @@ -626,12 +631,13 @@ EXPORT_SYMBOL_GPL(dma_buf_fd);
> > > > * @fd: [in] fd associated with the struct dma_buf to
> > > > be
> > > > returned
> > > > *
> > > > * On success, returns the struct dma_buf associated with an
> > > > fd;
> > > > uses
> > > > - * file's refcounting done by fget to increase refcount.
> > > > returns
> > > > ERR_PTR
> > > > - * otherwise.
> > > > + * dmabuf's ref refcounting done by kref_get to increase
> > > > refcount.
> > > > + * Returns ERR_PTR otherwise.
> > > > */
> > > > struct dma_buf *dma_buf_get(int fd)
> > > > {
> > > > struct file *file;
> > > > + struct dma_buf *dmabuf;
> > > >
> > > > file = fget(fd);
> > > >
> > > > @@ -643,7 +649,12 @@ struct dma_buf *dma_buf_get(int fd)
> > > > return ERR_PTR(-EINVAL);
> > > > }
> > > >
> > > > - return file->private_data;
> > > > + dmabuf = file->private_data;
> > > > + /* replace file count increase as ref increase for kernel
> > > > user
> > > > */
> > > > + get_dma_buf(dmabuf);
> > > > + fput(file);
> > > > +
> > > > + return dmabuf;
> > > > }
> > > > EXPORT_SYMBOL_GPL(dma_buf_get);
> > > >
> > > > @@ -662,7 +673,11 @@ void dma_buf_put(struct dma_buf *dmabuf)
> > > > if (WARN_ON(!dmabuf || !dmabuf->file))
> > > > return;
> > > >
> > > > - fput(dmabuf->file);
> > > > + if (WARN_ON(!atomic64_read(&dmabuf->kernel_ref)))
> > > > + return;
> > > > +
> > > > + if (!atomic64_dec_return(&dmabuf->kernel_ref))
> > > > + fput(dmabuf->file);
> > > > }
> > > > EXPORT_SYMBOL_GPL(dma_buf_put);
> > > >
> > > > diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h
> > > > index efdc56b9d95f..bc790cb028eb 100644
> > > > --- a/include/linux/dma-buf.h
> > > > +++ b/include/linux/dma-buf.h
> > > > @@ -308,6 +308,7 @@ struct dma_buf_ops {
> > > > struct dma_buf {
> > > > size_t size;
> > > > struct file *file;
> > > > + atomic64_t kernel_ref;
> > > > struct list_head attachments;
> > > > const struct dma_buf_ops *ops;
> > > > struct mutex lock;
> > > > @@ -436,7 +437,7 @@ struct dma_buf_export_info {
> > > > .owner = THIS_MODULE }
> > > >
> > > > /**
> > > > - * get_dma_buf - convenience wrapper for get_file.
> > > > + * get_dma_buf - increase a kernel ref of dma-buf
> > > > * @dmabuf: [in] pointer to dma_buf
> > > > *
> > > > * Increments the reference count on the dma-buf, needed in
> > > > case
> > > > of drivers
> > > > @@ -446,7 +447,8 @@ struct dma_buf_export_info {
> > > > */
> > > > static inline void get_dma_buf(struct dma_buf *dmabuf)
> > > > {
> > > > - get_file(dmabuf->file);
> > > > + if (atomic64_inc_return(&dmabuf->kernel_ref) == 1)
> > > > + get_file(dmabuf->file);
> > > > }
> > > >
> > > > /**
>
>
More information about the dri-devel
mailing list