[RFC PATCH 12/17] dt-bindings: display: bridge: samsung,mipi-dsim: Add i.MX8MM support

[Rob Herring]

On Sun, Jul 04, 2021 at 02:32:25PM +0530, Jagan Teki wrote:
> Samsung MIPI DSIM bridge can also be found in i.MX8MM SoC.
> 
> Add dt-bingings for it.
> 
> Cc: Rob Herring <robh+dt at kernel.org>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  .../display/bridge/samsung,mipi-dsim.yaml     | 84 ++++++++++++++++++-
>  1 file changed, 83 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> index b2970734ffd7..bd12d5706291 100644
> --- a/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/samsung,mipi-dsim.yaml
> @@ -26,6 +26,7 @@ properties:
>        - samsung,exynos5410-mipi-dsi
>        - samsung,exynos5422-mipi-dsi
>        - samsung,exynos5433-mipi-dsi
> +      - fsl,imx8mm-mipi-dsim
>  
>    reg:
>      maxItems: 1
> @@ -39,6 +40,10 @@ properties:
>    '#size-cells':
>      const: 0
>  
> +  assigned-clock-parents: true
> +  assigned-clock-rates: true
> +  assigned-clocks: true

You don't need these. They are always allowed if 'clocks' is present.

> +
>    clocks:
>      minItems: 2
>      maxItems: 5
> @@ -102,7 +107,7 @@ properties:
>          properties:
>            endpoint at 0:
>              $ref: /schemas/graph.yaml#/properties/endpoint
> -            description: sub-node describing the input from MIC
> +            description: sub-node describing the input from MIC or LCDIF
>  
>          unevaluatedProperties: false
>  
> @@ -128,6 +133,30 @@ required:
>  
>  allOf:
>    - $ref: ../dsi-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: fsl,imx8mm-mipi-dsim
> +
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +
> +        clock-names:
> +          items:
> +            - const: bus_clk
> +            - const: sclk_mipi
> +
> +        ports:
> +          required:
> +            - port at 0
> +            - port at 1
> +
> +      required:
> +        - ports
> +
>    - if:
>        properties:
>          compatible:
> @@ -221,6 +250,59 @@ additionalProperties:
>    type: object
>  
>  examples:
> +  - |
> +    #include <dt-bindings/clock/imx8mm-clock.h>
> +    #include <dt-bindings/power/imx8mm-power.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    dsi at 32e10000 {
> +       compatible = "fsl,imx8mm-mipi-dsim";
> +       reg = <0x32e10000 0x400>;
> +       clocks = <&clk IMX8MM_CLK_DSI_CORE>,
> +                <&clk IMX8MM_CLK_DSI_PHY_REF>;
> +       clock-names = "bus_clk", "sclk_mipi";
> +       assigned-clocks = <&clk IMX8MM_CLK_DSI_CORE>,
> +                         <&clk IMX8MM_VIDEO_PLL1_OUT>,
> +                         <&clk IMX8MM_CLK_DSI_PHY_REF>;
> +       assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
> +                         <&clk IMX8MM_VIDEO_PLL1_BYPASS>,
> +                         <&clk IMX8MM_VIDEO_PLL1_OUT>;
> +       assigned-clock-rates = <266000000>, <594000000>, <27000000>;
> +       interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +       phys = <&mipi_phy 0>;
> +       phy-names = "dsim";
> +       power-domains = <&dispmix_blk_ctl IMX8MM_BLK_CTL_PD_DISPMIX_MIPI_DSI>;
> +       samsung,burst-clock-frequency = <891000000>;
> +       samsung,esc-clock-frequency = <54000000>;
> +       samsung,pll-clock-frequency = <27000000>;
> +       status = "disabled";
> +
> +       ports {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +
> +          port at 0 {
> +             reg = <0>;
> +             #address-cells = <1>;
> +             #size-cells = <0>;
> +
> +             dsi_in_lcdif: endpoint at 0 {
> +                reg = <0>;
> +                remote-endpoint = <&lcdif_out_dsi>;
> +             };
> +          };
> +
> +          port at 1 {
> +             reg = <1>;
> +
> +             dsi_out_panel: endpoint {
> +                remote-endpoint = <&panel_in_dsi>;
> +             };
> +          };
> +       };
> +    };
> +
>    - |
>      #include <dt-bindings/clock/exynos5433.h>
>      #include <dt-bindings/gpio/gpio.h>
> -- 
> 2.25.1
> 
>