[PATCH 08/13] vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set

Jason Gunthorpe jgg at nvidia.com
Thu Jul 15 00:20:37 UTC 2021


Keep track of all the vfio_devices that have been added to the device set
and use this list in vfio_pci_try_bus_reset() instead of trying to work
backwards from the pci_device.

The dev_set->lock directly prevents devices from joining/leaving the set,
which further implies the pci_device cannot change drivers or that the
vfio_device be freed, eliminating the need for get/put's.

Completeness of the device set can be directly measured by checking if
every PCI device in the reset group is also in the device set - which
proves that VFIO drivers are attached to everything.

This restructuring corrects a call to pci_dev_driver() without holding the
device_lock() and removes a hard wiring to &vfio_pci_driver.

Signed-off-by: Jason Gunthorpe <jgg at nvidia.com>
---
 drivers/vfio/pci/vfio_pci.c | 110 ++++++++++++++----------------------
 drivers/vfio/vfio.c         |  10 ++++
 include/linux/vfio.h        |   2 +
 3 files changed, 53 insertions(+), 69 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 22774e447b5f4a..fbc20f6d2dd412 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -404,6 +404,9 @@ static void vfio_pci_disable(struct vfio_pci_device *vdev)
 	struct vfio_pci_ioeventfd *ioeventfd, *ioeventfd_tmp;
 	int i, bar;
 
+	/* For needs_reset */
+	lockdep_assert_held(&vdev->vdev.dev_set->lock);
+
 	/* Stop the device from further DMA */
 	pci_clear_master(pdev);
 
@@ -2139,34 +2142,17 @@ static struct pci_driver vfio_pci_driver = {
 	.err_handler		= &vfio_err_handlers,
 };
 
-static int vfio_pci_get_unused_devs(struct pci_dev *pdev, void *data)
+static int vfio_pci_check_all_devices_bound(struct pci_dev *pdev, void *data)
 {
-	struct vfio_devices *devs = data;
-	struct vfio_device *device;
-	struct vfio_pci_device *vdev;
-
-	if (devs->cur_index == devs->max_index)
-		return -ENOSPC;
+	struct vfio_device_set *dev_set = data;
+	struct vfio_device *cur;
 
-	device = vfio_device_get_from_dev(&pdev->dev);
-	if (!device)
-		return -EINVAL;
-
-	if (pci_dev_driver(pdev) != &vfio_pci_driver) {
-		vfio_device_put(device);
-		return -EBUSY;
-	}
-
-	vdev = container_of(device, struct vfio_pci_device, vdev);
-
-	/* Fault if the device is not unused */
-	if (device->open_count) {
-		vfio_device_put(device);
-		return -EBUSY;
-	}
+	lockdep_assert_held(&dev_set->lock);
 
-	devs->devices[devs->cur_index++] = vdev;
-	return 0;
+	list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
+		if (cur->dev == &pdev->dev)
+			return 0;
+	return -EBUSY;
 }
 
 static int vfio_pci_try_zap_and_vma_lock_cb(struct pci_dev *pdev, void *data)
@@ -2210,8 +2196,7 @@ static int vfio_pci_try_zap_and_vma_lock_cb(struct pci_dev *pdev, void *data)
  *    needs_reset (such as by lack of FLR support)
  * Then attempt to perform that bus or slot reset.  Callers are required
  * to hold vdev->dev_set->lock, protecting the bus/slot reset group from
- * concurrent opens.  A vfio_device reference is acquired for each device
- * to prevent unbinds during the reset operation.
+ * concurrent opens.
  *
  * NB: vfio-core considers a group to be viable even if some devices are
  * bound to drivers like pci-stub or pcieport.  Here we require all devices
@@ -2220,61 +2205,48 @@ static int vfio_pci_try_zap_and_vma_lock_cb(struct pci_dev *pdev, void *data)
  */
 static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
 {
-	struct vfio_devices devs = { .cur_index = 0 };
-	int i = 0, ret = -EINVAL;
-	bool slot = false;
-	struct vfio_pci_device *tmp;
-
-	if (!pci_probe_reset_slot(vdev->pdev->slot))
-		slot = true;
-	else if (pci_probe_reset_bus(vdev->pdev->bus))
-		return;
+	struct vfio_device_set *dev_set = vdev->vdev.dev_set;
+	struct vfio_pci_device *to_reset = NULL;
+	struct vfio_pci_device *cur;
+	int ret;
 
-	if (vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_count_devs,
-					  &i, slot) || !i)
+	if (pci_probe_reset_slot(vdev->pdev->slot) &&
+	    pci_probe_reset_bus(vdev->pdev->bus))
 		return;
 
-	devs.max_index = i;
-	devs.devices = kcalloc(i, sizeof(struct vfio_device *), GFP_KERNEL);
-	if (!devs.devices)
-		return;
+	lockdep_assert_held(&vdev->vdev.dev_set->lock);
 
-	if (vfio_pci_for_each_slot_or_bus(vdev->pdev,
-					  vfio_pci_get_unused_devs,
-					  &devs, slot))
-		goto put_devs;
+	/* All VFIO devices have a closed FD */
+	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
+		if (cur->vdev.open_count)
+			return;
+
+	/* All devices in the group to be reset need VFIO devices */
+	if (vfio_pci_for_each_slot_or_bus(
+		    vdev->pdev, vfio_pci_check_all_devices_bound, dev_set,
+		    !pci_probe_reset_slot(vdev->pdev->slot)))
+		return;
 
 	/* Does at least one need a reset? */
-	for (i = 0; i < devs.cur_index; i++) {
-		tmp = devs.devices[i];
-		if (tmp->needs_reset) {
-			ret = pci_reset_bus(vdev->pdev);
+	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list) {
+		if (cur->needs_reset) {
+			to_reset = cur;
 			break;
 		}
 	}
+	if (!to_reset)
+		return;
 
-put_devs:
-	for (i = 0; i < devs.cur_index; i++) {
-		tmp = devs.devices[i];
-
-		/*
-		 * If reset was successful, affected devices no longer need
-		 * a reset and we should return all the collateral devices
-		 * to low power.  If not successful, we either didn't reset
-		 * the bus or timed out waiting for it, so let's not touch
-		 * the power state.
-		 */
-		if (!ret) {
-			tmp->needs_reset = false;
+	ret = pci_reset_bus(to_reset->pdev);
+	if (ret)
+		return;
 
-			if (tmp != vdev && !disable_idle_d3)
-				vfio_pci_set_power_state(tmp, PCI_D3hot);
-		}
+	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list) {
+		cur->needs_reset = false;
 
-		vfio_device_put(&tmp->vdev);
+		if (cur != to_reset && !disable_idle_d3)
+			vfio_pci_set_power_state(cur, PCI_D3hot);
 	}
-
-	kfree(devs.devices);
 }
 
 static void __exit vfio_pci_cleanup(void)
diff --git a/drivers/vfio/vfio.c b/drivers/vfio/vfio.c
index 6908c2ae9b36f6..26d340283044e7 100644
--- a/drivers/vfio/vfio.c
+++ b/drivers/vfio/vfio.c
@@ -127,7 +127,12 @@ int vfio_assign_device_set(struct vfio_device *device, void *set_id)
 	if (dev_set) {
 		dev_set->device_count++;
 		xa_unlock(&vfio_device_set_xa);
+
+		mutex_lock(&dev_set->lock);
 		device->dev_set = dev_set;
+		list_add_tail(&device->dev_set_list, &dev_set->device_list);
+		mutex_unlock(&dev_set->lock);
+
 		if (dev_set != alloc_dev_set)
 			kfree(alloc_dev_set);
 		return 0;
@@ -141,6 +146,7 @@ int vfio_assign_device_set(struct vfio_device *device, void *set_id)
 	if (!alloc_dev_set)
 		return -ENOMEM;
 	mutex_init(&alloc_dev_set->lock);
+	INIT_LIST_HEAD(&alloc_dev_set->device_list);
 	alloc_dev_set->set_id = set_id;
 	goto again;
 }
@@ -153,6 +159,10 @@ static void vfio_release_device_set(struct vfio_device *device)
 	if (!dev_set)
 		return;
 
+	mutex_lock(&dev_set->lock);
+	list_del(&device->dev_set_list);
+	mutex_unlock(&dev_set->lock);
+
 	xa_lock(&vfio_device_set_xa);
 	dev_set->device_count--;
 	if (!dev_set->device_count) {
diff --git a/include/linux/vfio.h b/include/linux/vfio.h
index 128b4db00adc57..f0e6a72875e471 100644
--- a/include/linux/vfio.h
+++ b/include/linux/vfio.h
@@ -23,6 +23,7 @@
 struct vfio_device_set {
 	void *set_id;
 	struct mutex lock;
+	struct list_head device_list;
 	unsigned int device_count;
 };
 
@@ -31,6 +32,7 @@ struct vfio_device {
 	const struct vfio_device_ops *ops;
 	struct vfio_group *group;
 	struct vfio_device_set *dev_set;
+	struct list_head dev_set_list;
 
 	/* Members below here are private, not for driver use */
 	refcount_t refcount;
-- 
2.32.0



More information about the dri-devel mailing list