[PATCH v9 1/4] dt-bindings:drm/bridge:anx7625:add vendor define flags

[Xin Ji]

On Wed, Jul 14, 2021 at 11:32:35AM +0300, Laurent Pinchart wrote:
> Hi Xin,
> 
> On Wed, Jul 07, 2021 at 03:30:51PM +0800, Xin Ji wrote:
> > On Thu, Jun 24, 2021 at 01:57:22PM +0200, Robert Foss wrote:
> > > Hey Xin,
> > > 
> > > I would like to merge this series now, but this patch needs a review
> > > first. Maybe Laurent/Rob Herring are good candidates.
> >
> > Hi Rob, I get Laurent/Rob comments before, and explained why we needs
> > these DT properties, so far, I didn't get any response.
> > 
> > Hi Rob Herring and Laurent, for the DT property lane0/1-swing, Google
> > engineer has strong demond for them, they don't want to move DP swing
> > adjusting to kernel, thus may cause change the driver code in each
> > project, so config them in DT is a best option.
> 
> Hardcoding it in the driver is certainly not a good option, but
> hardcoding it in DT isn't either unless you can explain how the value
> should be computed. "Contact the vendor" isn't good enough.
Hi Laurent Pinchart, thanks for the coment, I'll add more detail explain
about the value means.

Thanks,
Xin
> 
> > > On Tue, 22 Jun 2021 at 14:31, Xin Ji <xji at analogixsemi.com> wrote:
> > > >
> > > > Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0,
> > > > lane1 swing register array define, and audio enable flag.
> > > >
> > > > Signed-off-by: Xin Ji <xji at analogixsemi.com>
> > > > ---
> > > >  .../display/bridge/analogix,anx7625.yaml      | 57 ++++++++++++++++++-
> > > >  1 file changed, 56 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > index ab48ab2f4240..9e604d19a3d5 100644
> > > > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > > > @@ -43,6 +43,26 @@ properties:
> > > >    vdd33-supply:
> > > >      description: Regulator that provides the supply 3.3V power.
> > > >
> > > > +  analogix,lane0-swing:
> > > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > > +    minItems: 1
> > > > +    maxItems: 20
> > > > +    description:
> > > > +      an array of swing register setting for DP tx lane0 PHY, please don't
> > > > +      add this property, or contact vendor.
> > > > +
> > > > +  analogix,lane1-swing:
> > > > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> > > > +    minItems: 1
> > > > +    maxItems: 20
> > > > +    description:
> > > > +      an array of swing register setting for DP tx lane1 PHY, please don't
> > > > +      add this property, or contact vendor.
> > > > +
> > > > +  analogix,audio-enable:
> > > > +    type: boolean
> > > > +    description: let the driver enable audio HDMI codec function or not.
> > > > +
> > > >    ports:
> > > >      $ref: /schemas/graph.yaml#/properties/ports
> > > >
> > > > @@ -50,13 +70,43 @@ properties:
> > > >        port at 0:
> > > >          $ref: /schemas/graph.yaml#/properties/port
> > > >          description:
> > > > -          Video port for MIPI DSI input.
> > > > +          MIPI DSI/DPI input.
> > > > +
> > > > +        properties:
> > > > +          endpoint:
> > > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > > +            type: object
> > > > +            additionalProperties: false
> > > > +
> > > > +            properties:
> > > > +              remote-endpoint: true
> > > > +              bus-type: true
> > > > +              data-lanes: true
> > > > +
> > > > +            required:
> > > > +              - remote-endpoint
> > > > +
> > > > +        required:
> > > > +          - endpoint
> > > > +
> > > >
> > > >        port at 1:
> > > >          $ref: /schemas/graph.yaml#/properties/port
> > > >          description:
> > > >            Video port for panel or connector.
> > > >
> > > > +        properties:
> > > > +          endpoint:
> > > > +            $ref: /schemas/media/video-interfaces.yaml#
> > > > +            type: object
> > > > +            additionalProperties: false
> > > > +
> > > > +            properties:
> > > > +              remote-endpoint: true
> > > > +
> > > > +            required:
> > > > +              - remote-endpoint
> > > > +
> > > >      required:
> > > >        - port at 0
> > > >        - port at 1
> > > > @@ -87,6 +137,9 @@ examples:
> > > >              vdd10-supply = <&pp1000_mipibrdg>;
> > > >              vdd18-supply = <&pp1800_mipibrdg>;
> > > >              vdd33-supply = <&pp3300_mipibrdg>;
> > > > +            analogix,audio-enable;
> > > > +            analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > > +            analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>;
> > > >
> > > >              ports {
> > > >                  #address-cells = <1>;
> > > > @@ -96,6 +149,8 @@ examples:
> > > >                      reg = <0>;
> > > >                      anx7625_in: endpoint {
> > > >                          remote-endpoint = <&mipi_dsi>;
> > > > +                        bus-type = <5>;
> > > > +                        data-lanes = <0 1 2 3>;
> > > >                      };
> > > >                  };
> > > >
> 
> -- 
> Regards,
> 
> Laurent Pinchart