[PATCH] drm/lima: Convert to clk_bulk API
Qiang Yu
yuq825 at gmail.com
Sat Jul 17 12:34:29 UTC 2021
On Sat, Jul 17, 2021 at 2:20 AM Marek Vasut <marex at denx.de> wrote:
>
> Instead of requesting two separate clock and then handling them
> separately in various places of the driver, use clk_bulk_*() API.
> This permits handling devices with more than "bus"/"core" clock,
> like ZynqMP, which has "gpu"/"gpu_pp0"/"gpu_pp1" all as separate
> clock.
I can't find the ZynqMP DTS file under arch/arm64/boot/dts/xilinx
which has mali GPU node with an upstream kernel, where is it?
So what's the relationship between "gpu" clk and "gpu_pp0"/"gpu_pp1"
clk? Do they need to be controlled separately or we can just control the
"gpu" clk? Because the devfreq code just controls a single module clk.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Qiang Yu <yuq825 at gmail.com>
> Cc: lima at lists.freedesktop.org
> ---
> drivers/gpu/drm/lima/lima_devfreq.c | 17 +++++++++---
> drivers/gpu/drm/lima/lima_devfreq.h | 1 +
> drivers/gpu/drm/lima/lima_device.c | 42 +++++++++++------------------
> drivers/gpu/drm/lima/lima_device.h | 4 +--
> 4 files changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/drivers/gpu/drm/lima/lima_devfreq.c b/drivers/gpu/drm/lima/lima_devfreq.c
> index 8989e215dfc9..533b36932f79 100644
> --- a/drivers/gpu/drm/lima/lima_devfreq.c
> +++ b/drivers/gpu/drm/lima/lima_devfreq.c
> @@ -58,7 +58,7 @@ static int lima_devfreq_get_dev_status(struct device *dev,
> struct lima_devfreq *devfreq = &ldev->devfreq;
> unsigned long irqflags;
>
> - status->current_frequency = clk_get_rate(ldev->clk_gpu);
> + status->current_frequency = clk_get_rate(devfreq->clk_gpu);
>
> spin_lock_irqsave(&devfreq->lock, irqflags);
>
> @@ -110,12 +110,23 @@ int lima_devfreq_init(struct lima_device *ldev)
> struct lima_devfreq *ldevfreq = &ldev->devfreq;
> struct dev_pm_opp *opp;
> unsigned long cur_freq;
> - int ret;
> + int i, ret;
>
> if (!device_property_present(dev, "operating-points-v2"))
> /* Optional, continue without devfreq */
> return 0;
>
> + /* Find first clock which are not "bus" clock */
> + for (i = 0; i < ldev->nr_clks; i++) {
> + if (!strcmp(ldev->clks[i].id, "bus"))
> + continue;
> + ldevfreq->clk_gpu = ldev->clks[i].clk;
> + break;
> + }
I'd prefer an explicit name for the required clk name. If some DTS has different
name other than "core" for the module clk (ie. "gpu"), it should be changed to
"core".
> +
> + if (!ldevfreq->clk_gpu)
> + return -ENODEV;
> +
> spin_lock_init(&ldevfreq->lock);
>
> ret = devm_pm_opp_set_clkname(dev, "core");
> @@ -135,7 +146,7 @@ int lima_devfreq_init(struct lima_device *ldev)
>
> lima_devfreq_reset(ldevfreq);
>
> - cur_freq = clk_get_rate(ldev->clk_gpu);
> + cur_freq = clk_get_rate(ldevfreq->clk_gpu);
>
> opp = devfreq_recommended_opp(dev, &cur_freq, 0);
> if (IS_ERR(opp))
> diff --git a/drivers/gpu/drm/lima/lima_devfreq.h b/drivers/gpu/drm/lima/lima_devfreq.h
> index b8e50feaeab6..ffef5c91795d 100644
> --- a/drivers/gpu/drm/lima/lima_devfreq.h
> +++ b/drivers/gpu/drm/lima/lima_devfreq.h
> @@ -17,6 +17,7 @@ struct lima_devfreq {
> struct devfreq *devfreq;
> struct thermal_cooling_device *cooling;
> struct devfreq_simple_ondemand_data gov_data;
> + struct clk *clk_gpu;
>
> ktime_t busy_time;
> ktime_t idle_time;
> diff --git a/drivers/gpu/drm/lima/lima_device.c b/drivers/gpu/drm/lima/lima_device.c
> index 65fdca366e41..9f7bde7e9d22 100644
> --- a/drivers/gpu/drm/lima/lima_device.c
> +++ b/drivers/gpu/drm/lima/lima_device.c
> @@ -85,29 +85,23 @@ static int lima_clk_enable(struct lima_device *dev)
> {
> int err;
>
> - err = clk_prepare_enable(dev->clk_bus);
> + err = clk_bulk_prepare_enable(dev->nr_clks, dev->clks);
> if (err)
> return err;
>
> - err = clk_prepare_enable(dev->clk_gpu);
> - if (err)
> - goto error_out0;
> -
> if (dev->reset) {
> err = reset_control_deassert(dev->reset);
> if (err) {
> dev_err(dev->dev,
> "reset controller deassert failed %d\n", err);
> - goto error_out1;
> + goto error;
> }
> }
>
> return 0;
>
> -error_out1:
> - clk_disable_unprepare(dev->clk_gpu);
> -error_out0:
> - clk_disable_unprepare(dev->clk_bus);
> +error:
> + clk_bulk_disable_unprepare(dev->nr_clks, dev->clks);
> return err;
> }
>
> @@ -115,31 +109,23 @@ static void lima_clk_disable(struct lima_device *dev)
> {
> if (dev->reset)
> reset_control_assert(dev->reset);
> - clk_disable_unprepare(dev->clk_gpu);
> - clk_disable_unprepare(dev->clk_bus);
> + clk_bulk_disable_unprepare(dev->nr_clks, dev->clks);
> }
>
> static int lima_clk_init(struct lima_device *dev)
> {
> int err;
>
> - dev->clk_bus = devm_clk_get(dev->dev, "bus");
> - if (IS_ERR(dev->clk_bus)) {
> - err = PTR_ERR(dev->clk_bus);
> + err = devm_clk_bulk_get_all(dev->dev, &dev->clks);
> + if (err < 1) {
> + if (err == 0) /* No clock at all is an error too */
> + err = -ENODEV;
> if (err != -EPROBE_DEFER)
> - dev_err(dev->dev, "get bus clk failed %d\n", err);
> - dev->clk_bus = NULL;
> + dev_err(dev->dev, "get clk failed %d\n", err);
> return err;
> }
>
> - dev->clk_gpu = devm_clk_get(dev->dev, "core");
> - if (IS_ERR(dev->clk_gpu)) {
> - err = PTR_ERR(dev->clk_gpu);
> - if (err != -EPROBE_DEFER)
> - dev_err(dev->dev, "get core clk failed %d\n", err);
> - dev->clk_gpu = NULL;
> - return err;
> - }
> + dev->nr_clks = err;
>
> dev->reset = devm_reset_control_array_get_optional_shared(dev->dev);
> if (IS_ERR(dev->reset)) {
> @@ -412,8 +398,10 @@ int lima_device_init(struct lima_device *ldev)
> INIT_LIST_HEAD(&ldev->error_task_list);
> mutex_init(&ldev->error_task_list_lock);
>
> - dev_info(ldev->dev, "bus rate = %lu\n", clk_get_rate(ldev->clk_bus));
> - dev_info(ldev->dev, "mod rate = %lu", clk_get_rate(ldev->clk_gpu));
> + for (i = 0; i < ldev->nr_clks; i++) {
> + dev_info(ldev->dev, "clk %s = %lu Hz\n", ldev->clks[i].id,
> + clk_get_rate(ldev->clks[i].clk));
> + }
>
> return 0;
>
> diff --git a/drivers/gpu/drm/lima/lima_device.h b/drivers/gpu/drm/lima/lima_device.h
> index 41b9d7b4bcc7..de11570c9903 100644
> --- a/drivers/gpu/drm/lima/lima_device.h
> +++ b/drivers/gpu/drm/lima/lima_device.h
> @@ -85,8 +85,8 @@ struct lima_device {
> int num_pp;
>
> void __iomem *iomem;
> - struct clk *clk_bus;
> - struct clk *clk_gpu;
> + struct clk_bulk_data *clks;
> + int nr_clks;
> struct reset_control *reset;
> struct regulator *regulator;
>
> --
> 2.30.2
>
More information about the dri-devel
mailing list