[PATCH resend 3/5] video: fbdev: ssd1307fb: Extract ssd1307fb_set_address_range()
Sam Ravnborg
sam at ravnborg.org
Mon Jul 19 19:07:32 UTC 2021
Hi Geert,
On Wed, Jul 14, 2021 at 04:58:02PM +0200, Geert Uytterhoeven wrote:
> Extract the code to set the column and page ranges into a helper
> function.
>
> Signed-off-by: Geert Uytterhoeven <geert at linux-m68k.org>
> ---
> drivers/video/fbdev/ssd1307fb.c | 61 +++++++++++++++++++--------------
> 1 file changed, 36 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
> index 6d7bd025bca1a175..cfa27ea0feab4f01 100644
> --- a/drivers/video/fbdev/ssd1307fb.c
> +++ b/drivers/video/fbdev/ssd1307fb.c
> @@ -152,6 +152,38 @@ static inline int ssd1307fb_write_cmd(struct i2c_client *client, u8 cmd)
> return ret;
> }
>
> +static int ssd1307fb_set_address_range(struct ssd1307fb_par *par, u8 col_start,
> + u8 cols, u8 page_start, u8 pages)
> +{
Bikeshedding, but I think a dedicated function for col_range and another
for page_range had been simpler to read.
With or wihout this change:
Acked-by: Sam Ravnborg <sam at ravnborg.org>
Sam
> + u8 col_end = col_start + cols - 1;
> + u8 page_end = page_start + pages - 1;
> + int ret;
> +
> + /* Set column range */
> + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
> + if (ret < 0)
> + return ret;
> +
> + ret = ssd1307fb_write_cmd(par->client, col_start);
> + if (ret < 0)
> + return ret;
> +
> + ret = ssd1307fb_write_cmd(par->client, col_end);
> + if (ret < 0)
> + return ret;
> +
> + /* Set page range */
> + ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
> + if (ret < 0)
> + return ret;
> +
> + ret = ssd1307fb_write_cmd(par->client, page_start);
> + if (ret < 0)
> + return ret;
> +
> + return ssd1307fb_write_cmd(par->client, page_end);
> +}
> +
> static int ssd1307fb_update_display(struct ssd1307fb_par *par)
> {
> struct ssd1307fb_array *array;
> @@ -461,31 +493,10 @@ static int ssd1307fb_init(struct ssd1307fb_par *par)
> if (ret < 0)
> return ret;
>
> - /* Set column range */
> - ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE);
> - if (ret < 0)
> - return ret;
> -
> - ret = ssd1307fb_write_cmd(par->client, par->col_offset);
> - if (ret < 0)
> - return ret;
> -
> - ret = ssd1307fb_write_cmd(par->client, par->col_offset + par->width - 1);
> - if (ret < 0)
> - return ret;
> -
> - /* Set page range */
> - ret = ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE);
> - if (ret < 0)
> - return ret;
> -
> - ret = ssd1307fb_write_cmd(par->client, par->page_offset);
> - if (ret < 0)
> - return ret;
> -
> - ret = ssd1307fb_write_cmd(par->client,
> - par->page_offset +
> - DIV_ROUND_UP(par->height, 8) - 1);
> + /* Set column and page range */
> + ret = ssd1307fb_set_address_range(par, par->col_offset, par->width,
> + par->page_offset,
> + DIV_ROUND_UP(par->height, 8));
> if (ret < 0)
> return ret;
>
> --
> 2.25.1
More information about the dri-devel
mailing list