[PATCH 08/14] drm/i915/guc/slpc: Add get max/min freq hooks

Vinay Belgaumkar vinay.belgaumkar at intel.com
Wed Jul 21 16:11:14 UTC 2021


Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read.

v2: Address review comments (Michal W)

Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar at intel.com>
Signed-off-by: Sundaresan Sujaritha <sujaritha.sundaresan at intel.com>
---
 drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c | 52 +++++++++++++++++++++
 drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h |  2 +
 2 files changed, 54 insertions(+)

diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
index b40c39ba4049..c1cf8d46e360 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.c
@@ -290,6 +290,32 @@ int intel_guc_slpc_set_max_freq(struct intel_guc_slpc *slpc, u32 val)
 	return ret;
 }
 
+/**
+ * intel_guc_slpc_get_max_freq() - Get max frequency limit for SLPC.
+ * @slpc: pointer to intel_guc_slpc.
+ * @val: pointer to val which will hold max frequency (MHz)
+ *
+ * This function will invoke GuC SLPC action to read the max frequency
+ * limit for unslice.
+ *
+ * Return: 0 on success, non-zero error code on failure.
+ */
+int intel_guc_slpc_get_max_freq(struct intel_guc_slpc *slpc, u32 *val)
+{
+	intel_wakeref_t wakeref;
+	struct drm_i915_private *i915 = guc_to_gt(slpc_to_guc(slpc))->i915;
+	int ret = 0;
+
+	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
+		/* Force GuC to update task data */
+		slpc_query_task_state(slpc);
+
+		*val = slpc_decode_max_freq(slpc);
+	}
+
+	return ret;
+}
+
 /**
  * intel_guc_slpc_set_min_freq() - Set min frequency limit for SLPC.
  * @slpc: pointer to intel_guc_slpc.
@@ -322,6 +348,32 @@ int intel_guc_slpc_set_min_freq(struct intel_guc_slpc *slpc, u32 val)
 	return ret;
 }
 
+/**
+ * intel_guc_slpc_get_min_freq() - Get min frequency limit for SLPC.
+ * @slpc: pointer to intel_guc_slpc.
+ * @val: pointer to val which will hold min frequency (MHz)
+ *
+ * This function will invoke GuC SLPC action to read the min frequency
+ * limit for unslice.
+ *
+ * Return: 0 on success, non-zero error code on failure.
+ */
+int intel_guc_slpc_get_min_freq(struct intel_guc_slpc *slpc, u32 *val)
+{
+	intel_wakeref_t wakeref;
+	struct drm_i915_private *i915 = guc_to_gt(slpc_to_guc(slpc))->i915;
+	int ret = 0;
+
+	with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
+		/* Force GuC to update task data */
+		slpc_query_task_state(slpc);
+
+		*val = slpc_decode_min_freq(slpc);
+	}
+
+	return ret;
+}
+
 /*
  * intel_guc_slpc_enable() - Start SLPC
  * @slpc: pointer to intel_guc_slpc.
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
index 3a1a7eaafc12..627c71a95777 100644
--- a/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
+++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_slpc.h
@@ -32,5 +32,7 @@ int intel_guc_slpc_enable(struct intel_guc_slpc *slpc);
 void intel_guc_slpc_fini(struct intel_guc_slpc *slpc);
 int intel_guc_slpc_set_max_freq(struct intel_guc_slpc *slpc, u32 val);
 int intel_guc_slpc_set_min_freq(struct intel_guc_slpc *slpc, u32 val);
+int intel_guc_slpc_get_max_freq(struct intel_guc_slpc *slpc, u32 *val);
+int intel_guc_slpc_get_min_freq(struct intel_guc_slpc *slpc, u32 *val);
 
 #endif
-- 
2.25.0



More information about the dri-devel mailing list