[PATCH 3/3] drm/panel-simple: add Gopher 2b LCD panel
Artjom Vejsel
akawolf0 at gmail.com
Thu Jul 22 14:04:32 UTC 2021
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver,
but SPI lines are not connected.
It has no specific name, since it's unique to that handhelds.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG
NV3047 Drive IC 480(RGB)*272 No Touch 24Bit RGB Interface
Signed-off-by: Artjom Vejsel <akawolf0 at gmail.com>
---
drivers/gpu/drm/panel/panel-simple.c | 44 ++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 9b286bd4444f..9cce6b63a147 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -4306,6 +4306,47 @@ static const struct panel_desc yes_optoelectronics_ytc700tlag_05_201c = {
.connector_type = DRM_MODE_CONNECTOR_LVDS,
};
+static const struct drm_display_mode qishenglong_gopher2b_lcd_panel_modes[] = {
+ { /* 60 Hz */
+ .clock = 10800,
+ .hdisplay = 480,
+ .hsync_start = 480 + 77,
+ .hsync_end = 480 + 77 + 41,
+ .htotal = 480 + 77 + 41 + 2,
+ .vdisplay = 272,
+ .vsync_start = 272 + 16,
+ .vsync_end = 272 + 16 + 10,
+ .vtotal = 272 + 16 + 10 + 2,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+ },
+ { /* 50 Hz */
+ .clock = 10800,
+ .hdisplay = 480,
+ .hsync_start = 480 + 17,
+ .hsync_end = 480 + 17 + 41,
+ .htotal = 480 + 17 + 41 + 2,
+ .vdisplay = 272,
+ .vsync_start = 272 + 116,
+ .vsync_end = 272 + 116 + 10,
+ .vtotal = 272 + 116 + 10 + 2,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+ },
+};
+
+static const struct panel_desc qishenglong_gopher2b_lcd_panel = {
+ .modes = qishenglong_gopher2b_lcd_panel_modes,
+ .num_modes = ARRAY_SIZE(qishenglong_gopher2b_lcd_panel_modes),
+ .num_modes = 1,
+ .bpc = 8,
+ .size = {
+ .width = 95,
+ .height = 54,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode arm_rtsm_mode[] = {
{
.clock = 65000,
@@ -4753,6 +4794,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "yes-optoelectronics,ytc700tlag-05-201c",
.data = &yes_optoelectronics_ytc700tlag_05_201c,
+ }, {
+ .compatible = "qishenglong,gopher2b-lcd-panel",
+ .data = &qishenglong_gopher2b_lcd_panel,
}, {
/* Must be the last entry */
.compatible = "panel-dpi",
--
2.32.0
More information about the dri-devel
mailing list