[PATCH v2 09/14] vfio/pci: Change vfio_pci_try_bus_reset() to use the dev_set

[Jason Gunthorpe]

On Fri, Jul 23, 2021 at 10:05:43AM +0200, Christoph Hellwig wrote:
> On Tue, Jul 20, 2021 at 02:42:55PM -0300, Jason Gunthorpe wrote:
> > Keep track of all the vfio_devices that have been added to the device set
> > and use this list in vfio_pci_try_bus_reset() instead of trying to work
> > backwards from the pci_device.
> > 
> > The dev_set->lock directly prevents devices from joining/leaving the set,
> > which further implies the pci_device cannot change drivers or that the
> > vfio_device be freed, eliminating the need for get/put's.
> > 
> > Completeness of the device set can be directly measured by checking if
> > every PCI device in the reset group is also in the device set - which
> > proves that VFIO drivers are attached to everything.
> > 
> > This restructuring corrects a call to pci_dev_driver() without holding the
> > device_lock() and removes a hard wiring to &vfio_pci_driver.
> > 
> > Signed-off-by: Jason Gunthorpe <jgg at nvidia.com>
> 
> I think the addition of the list to the dev_set should be a different
> patch.  Or maybe even go into the one adding the dev_set concept.

OK

> > +static int vfio_pci_check_all_devices_bound(struct pci_dev *pdev, void *data)
> >  {
> > +	struct vfio_device_set *dev_set = data;
> > +	struct vfio_device *cur;
> >  
> > +	lockdep_assert_held(&dev_set->lock);
> >  
> > +	list_for_each_entry(cur, &dev_set->device_list, dev_set_list)
> > +		if (cur->dev == &pdev->dev)
> > +			return 0;
> > +	return -EBUSY;
> 
> I don't understand this logic.  If there is any device in the set that
> does now have the same struct device we're in trouble?  Please clearly
> document what this is trying to do.  If the bound in the name makes sense
> you probably want to check the driver instead.

The PCI reset this code is tring to do effects a set of PCI devices,
due to how the HW works.

Along with the vfio_pci_for_each_slot_or_bus() this is computing a set
wise 'is superset' between the list of pci_dev's the reset will affect
(the reset group) and the list of vfio_devices that we have locking
control over to sequence the reset (the dev_set).

If every PCI device we will reset is under the dev_set then we
directly know it is safe to trigger the reset. If any PCI device is
not in this dev_set then we cannot use the reset as we can't know what
will happen to the device that we don't control.

Let's use a different word than bound? vfio_pci_check_device_in_set()?

> >  static void vfio_pci_try_bus_reset(struct vfio_pci_device *vdev)
> >  {
> > +	/* All VFIO devices have a closed FD */
> > +	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
> > +		if (cur->vdev.open_count)
> > +			return;
> > +
> > +	/* All devices in the group to be reset need VFIO devices */
> > +	if (vfio_pci_for_each_slot_or_bus(
> > +		    vdev->pdev, vfio_pci_check_all_devices_bound, dev_set,
> > +		    !pci_probe_reset_slot(vdev->pdev->slot)))
> > +		return;
> >  
> >  	/* Does at least one need a reset? */
> 
> These checks look a little strange, and the comments don't make much
> sense.  What about an incremental patch like this?

Sure, it can go in a function

> diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
> index fbc20f6d2dd412..d8375a5e77e07c 100644
> +++ b/drivers/vfio/pci/vfio_pci.c
> @@ -2188,10 +2188,34 @@ static int vfio_pci_try_zap_and_vma_lock_cb(struct pci_dev *pdev, void *data)
>  	return 0;
>  }
>  
> +static struct pci_dev *vfio_pci_reset_target(struct vfio_pci_device *vdev)
> +{
> +	struct vfio_device_set *dev_set = vdev->vdev.dev_set;
> +	struct vfio_pci_device *cur;
> +
> +	/* none of the device is allowed to be currently open: */
> +	list_for_each_entry(cur, &dev_set->device_list, vdev.dev_set_list)
> +		if (cur->vdev.open_count)
> +			return NULL;
> +
> +	/* all devices in the group to be reset need to be VFIO devices: */

It is not "need to be VFIO devices" it is "need to be in our
dev_set". Have the PCI dev bound to, say, a mdev VFIO device isn't
good enough.

Thanks,
Jason