[Freedreno] [PATCH 5/5] drm/msm/dp: Allow sub-regions to be specified in DT
abhinavk at codeaurora.org
abhinavk at codeaurora.org
Fri Jul 23 20:33:07 UTC 2021
On 2021-07-21 19:42, Bjorn Andersson wrote:
> Not all platforms has P0 at an offset of 0x1000 from the base address,
> so add support for specifying each sub-region in DT. The code falls
> back
> to the predefined offsets in the case that only a single reg is
> specified, in order to support existing DT.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson at linaro.org>
The change itself looks good, hence
Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
But as a follow up to this change, can we move the existing DP DT on
sc7180 to this model and then drop this legacy path?
That will clean this up nicely.
> ---
> drivers/gpu/drm/msm/dp/dp_parser.c | 49 +++++++++++++++++++++++-------
> 1 file changed, 38 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_parser.c
> b/drivers/gpu/drm/msm/dp/dp_parser.c
> index 1a10901ae574..fc8a6452f641 100644
> --- a/drivers/gpu/drm/msm/dp/dp_parser.c
> +++ b/drivers/gpu/drm/msm/dp/dp_parser.c
> @@ -63,18 +63,45 @@ static int dp_parser_ctrl_res(struct dp_parser
> *parser)
> return PTR_ERR(dss->ahb);
> }
>
> - if (dss->ahb_len < DP_DEFAULT_P0_OFFSET + DP_DEFAULT_P0_SIZE) {
> - DRM_ERROR("legacy memory region not large enough\n");
> - return -EINVAL;
> - }
> + dss->aux = dp_ioremap(pdev, 1, &dss->aux_len);
> + if (IS_ERR(dss->aux)) {
> + /*
> + * The initial binding had a single reg, but in order to
> + * support variation in the sub-region sizes this was split.
> + * dp_ioremap() will fail with -ENODEV here if only a single
> + * reg is specified, so fill in the sub-region offsets and
> + * lengths based on this single region.
> + */
> + if (PTR_ERR(dss->aux) == -ENODEV) {
> + if (dss->ahb_len < DP_DEFAULT_P0_OFFSET + DP_DEFAULT_P0_SIZE) {
> + DRM_ERROR("legacy memory region not large enough\n");
> + return -EINVAL;
> + }
> +
> + dss->ahb_len = DP_DEFAULT_AHB_SIZE;
> + dss->aux = dss->ahb + DP_DEFAULT_AUX_OFFSET;
> + dss->aux_len = DP_DEFAULT_AUX_SIZE;
> + dss->link = dss->ahb + DP_DEFAULT_LINK_OFFSET;
> + dss->link_len = DP_DEFAULT_LINK_SIZE;
> + dss->p0 = dss->ahb + DP_DEFAULT_P0_OFFSET;
> + dss->p0_len = DP_DEFAULT_P0_SIZE;
> + } else {
> + DRM_ERROR("unable to remap aux region: %pe\n", dss->aux);
> + return PTR_ERR(dss->aux);
> + }
> + } else {
> + dss->link = dp_ioremap(pdev, 2, &dss->link_len);
> + if (IS_ERR(dss->link)) {
> + DRM_ERROR("unable to remap link region: %pe\n", dss->link);
> + return PTR_ERR(dss->link);
> + }
>
> - dss->ahb_len = DP_DEFAULT_AHB_SIZE;
> - dss->aux = dss->ahb + DP_DEFAULT_AUX_OFFSET;
> - dss->aux_len = DP_DEFAULT_AUX_SIZE;
> - dss->link = dss->ahb + DP_DEFAULT_LINK_OFFSET;
> - dss->link_len = DP_DEFAULT_LINK_SIZE;
> - dss->p0 = dss->ahb + DP_DEFAULT_P0_OFFSET;
> - dss->p0_len = DP_DEFAULT_P0_SIZE;
> + dss->p0 = dp_ioremap(pdev, 3, &dss->p0_len);
> + if (IS_ERR(dss->p0)) {
> + DRM_ERROR("unable to remap p0 region: %pe\n", dss->p0);
> + return PTR_ERR(dss->p0);
> + }
> + }
>
> io->phy = devm_phy_get(&pdev->dev, "dp");
> if (IS_ERR(io->phy))
More information about the dri-devel
mailing list