[PATCH v2 0/6] Support second Image Signal Processor on rk3399

Heiko Stübner heiko at sntech.de
Sun Jul 25 22:58:29 UTC 2021


Am Mittwoch, 10. Februar 2021, 12:10:14 CEST schrieb Heiko Stuebner:
> The rk3399 has two ISPs and right now only the first one is usable.
> The second ISP is connected to the TXRX dphy on the soc.
> 
> The phy of ISP1 is only accessible through the DSI controller's
> io-memory, so this series adds support for simply using the dsi
> controller is a phy if needed.
> 
> That solution is needed at least on rk3399 and rk3288 but no-one
> has looked at camera support on rk3288 at all, so right now
> only implement the rk3399 specifics.
> 
> changes in v2:
> - enable grf-clock also for init callback
>   to not break if for example hdmi is connected on boot
>   and disabled the grf clock during its probe
> - add Sebastian's Tested-by
> - add Rob's Ack for the phy-cells property

finally found the time and applied patches 1-3 to drmmisc-next
after fixing the alphabetical kconfig ordering Helen pointed out
and also applied patches 4-6 to my rockchip tree for 5.15


> 
> Heiko Stuebner (6):
>   drm/rockchip: dsi: add own additional pclk handling
>   dt-bindings: display: rockchip-dsi: add optional #phy-cells property
>   drm/rockchip: dsi: add ability to work as a phy instead of full dsi
>   arm64: dts: rockchip: add #phy-cells to mipi-dsi1
>   arm64: dts: rockchip: add cif clk-control pinctrl for rk3399
>   arm64: dts: rockchip: add isp1 node on rk3399
> 
>  .../display/rockchip/dw_mipi_dsi_rockchip.txt |   1 +
>  arch/arm64/boot/dts/rockchip/rk3399.dtsi      |  39 ++
>  drivers/gpu/drm/rockchip/Kconfig              |   2 +
>  .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 349 ++++++++++++++++++
>  4 files changed, 391 insertions(+)
> 
> 






More information about the dri-devel mailing list