[PATCH 09/14] drm/kmb : W/A for planar formats

[Chrisanthus, Anitha]

Please ignore this patch. Will combine this with 256B w/a patch.

> -----Original Message-----
> From: Chrisanthus, Anitha <anitha.chrisanthus at intel.com>
> Sent: Tuesday, July 27, 2021 5:31 PM
> To: dri-devel at lists.freedesktop.org; Chrisanthus, Anitha
> <anitha.chrisanthus at intel.com>; Dea, Edmund J <edmund.j.dea at intel.com>
> Subject: [PATCH 09/14] drm/kmb : W/A for planar formats
> 
> This is a work around for fully planar formats, where color corruption
> was observed for formats like YU12, YU16 etc. Set the DMA Vstride and
> Line width for U and V planes to the same as the Y plane and not the
> actual pitch. For decoded video frames, continue to use the info from
> metadata.
> 
> Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
> Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus at intel.com>
> ---
>  drivers/gpu/drm/kmb/kmb_plane.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/kmb/kmb_plane.c
> b/drivers/gpu/drm/kmb/kmb_plane.c
> index dacec5c4266f..4523af949ea1 100644
> --- a/drivers/gpu/drm/kmb/kmb_plane.c
> +++ b/drivers/gpu/drm/kmb/kmb_plane.c
> @@ -333,6 +333,7 @@ static void kmb_plane_atomic_update(struct
> drm_plane *plane,
>  	struct disp_cfg *init_disp_cfg;
>  	struct viv_vidmem_metadata *md = NULL;
>  	struct drm_gem_object *gem_obj;
> +	unsigned int cb_stride, cr_stride;
> 
>  	if (!plane || !new_plane_state || !old_plane_state)
>  		return;
> @@ -397,8 +398,10 @@ static void kmb_plane_atomic_update(struct
> drm_plane *plane,
>  	val |= get_bits_per_pixel(fb->format);
>  	/* Program Cb/Cr for planar formats */
>  	if (num_planes > 1) {
> -		kmb_write_lcd(kmb,
> LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
> -				fb->pitches[1]);
> +		cb_stride = md ? fb->pitches[1] : width * fb->format->cpp[0];
> +		kmb_write_lcd(kmb,
> +			      LCD_LAYERn_DMA_CB_LINE_VSTRIDE(plane_id),
> +			      cb_stride);
>  		kmb_write_lcd(kmb,
> LCD_LAYERn_DMA_CB_LINE_WIDTH(plane_id),
>  			      (width * fb->format->cpp[0]));
> 
> @@ -419,9 +422,11 @@ static void kmb_plane_atomic_update(struct
> drm_plane *plane,
>  					addr[U_PLANE]);
> 
>  		if (num_planes == 3) {
> +			cr_stride = md ? fb->pitches[2] :
> +				    width * fb->format->cpp[0];
>  			kmb_write_lcd(kmb,
> 
> LCD_LAYERn_DMA_CR_LINE_VSTRIDE(plane_id),
> -				      fb->pitches[2]);
> +				      cr_stride);
> 
>  			kmb_write_lcd(kmb,
> 
> LCD_LAYERn_DMA_CR_LINE_WIDTH(plane_id),
> --
> 2.25.1