[PATCH v2 09/14] soc: mediatek: mmsys: Add reset controller support for MT8195 vdosys1
Nancy.Lin
nancy.lin at mediatek.com
Fri Jul 30 03:47:07 UTC 2021
Hi Enric,
On Wed, 2021-07-28 at 12:31 +0200, Enric Balletbo Serra wrote:
> Hi Nancy,
>
> Missatge de Nancy.Lin <nancy.lin at mediatek.com> del dia dc., 28 de
> jul.
> 2021 a les 8:01:
> >
> > Hi Enric,
> >
> > Thanks for your review.
> >
> > On Fri, 2021-07-23 at 12:57 +0200, Enric Balletbo Serra wrote:
> > > Hi Nancy,
> > >
> > > Thank you for your patch.
> > >
> > > Missatge de Nancy.Lin <nancy.lin at mediatek.com> del dia dj., 22 de
> > > jul.
> > > 2021 a les 11:46:
> > > >
> > > > Among other features the mmsys driver should implement a reset
> > > > controller to be able to reset different bits from their space.
> > > >
> > >
> > > I'm working on a series that does the same, it should be nice if
> > > we
> > > can coordinate [1]
> > >
> > > [1]
> > >
https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=515355__;!!CTRNKA9wMg0ARbw!xP6Ko9hF-3KasGgr7-8Aby_tCwiU2M6gFBAngDLVcJjzooj-MEeTcNG8cf2e9wGb$
> > >
> > >
> >
> > OK, I will add this series to my reference base in the next patch
> > revision.
> >
> > > > Signed-off-by: Nancy.Lin <nancy.lin at mediatek.com>
> > > > ---
> > > > drivers/soc/mediatek/mt8195-mmsys.h | 1 +
> > > > drivers/soc/mediatek/mtk-mmsys.c | 77
> > > > +++++++++++++++++++++++++++++
> > > > drivers/soc/mediatek/mtk-mmsys.h | 1 +
> > > > 3 files changed, 79 insertions(+)
> > > >
> > > > diff --git a/drivers/soc/mediatek/mt8195-mmsys.h
> > > > b/drivers/soc/mediatek/mt8195-mmsys.h
> > > > index 4bdb2087250c..a7f6e275bfe5 100644
> > > > --- a/drivers/soc/mediatek/mt8195-mmsys.h
> > > > +++ b/drivers/soc/mediatek/mt8195-mmsys.h
> > > > @@ -154,6 +154,7 @@
> > > > #define
> > > > DISP_DP_INTF0_SEL_IN_FROM_VDO0_MERGE_DL_ASYNC_MOUT (1
> > > > << 0)
> > > > #define
> > > > DISP_DP_INTF0_SEL_IN_FROM_VDO0_DSC_DL_ASYNC_MOUT (2
> > > > << 0)
> > > >
> > > > +#define MT8195_VDO1_SW0_RST_B 0x1d0
> > > > #define MT8195_VDO1_MERGE0_ASYNC_CFG_WD 0xe30
> > > > #define MT8195_VDO1_MERGE1_ASYNC_CFG_WD 0xe40
> > > > #define MT8195_VDO1_MERGE2_ASYNC_CFG_WD 0xe50
> > > > diff --git a/drivers/soc/mediatek/mtk-mmsys.c
> > > > b/drivers/soc/mediatek/mtk-mmsys.c
> > > > index d0f4a407f8f8..1ae04efeadab 100644
> > > > --- a/drivers/soc/mediatek/mtk-mmsys.c
> > > > +++ b/drivers/soc/mediatek/mtk-mmsys.c
> > > > @@ -4,10 +4,12 @@
> > > > * Author: James Liao <jamesjj.liao at mediatek.com>
> > > > */
> > > >
> > > > +#include <linux/delay.h>
> > > > #include <linux/device.h>
> > > > #include <linux/io.h>
> > > > #include <linux/of_device.h>
> > > > #include <linux/platform_device.h>
> > > > +#include <linux/reset-controller.h>
> > > > #include <linux/soc/mediatek/mtk-mmsys.h>
> > > >
> > > > #include "mtk-mmsys.h"
> > > > @@ -15,6 +17,8 @@
> > > > #include "mt8183-mmsys.h"
> > > > #include "mt8195-mmsys.h"
> > > >
> > > > +#define MMSYS_SW_RESET_PER_REG 32
> > > > +
> > > > static const struct mtk_mmsys_driver_data
> > > > mt2701_mmsys_driver_data
> > > > = {
> > > > .clk_driver = "clk-mt2701-mm",
> > > > .routes = mmsys_default_routing_table,
> > > > @@ -65,12 +69,15 @@ static const struct mtk_mmsys_driver_data
> > > > mt8195_vdosys1_driver_data = {
> > > > .num_routes = ARRAY_SIZE(mmsys_mt8195_routing_table),
> > > > .config = mmsys_mt8195_config_table,
> > > > .num_configs = ARRAY_SIZE(mmsys_mt8195_config_table),
> > > > + .sw_reset_start = MT8195_VDO1_SW0_RST_B,
> > >
> > > That change is interesting and I think I should also take it into
> > > consideration with my series.
> > >
> > > > };
> > > >
> > > > struct mtk_mmsys {
> > > > void __iomem *regs;
> > > > struct cmdq_client_reg cmdq_base;
> > > > const struct mtk_mmsys_driver_data *data;
> > > > + spinlock_t lock; /* protects mmsys_sw_rst_b reg */
> > >
> > > Seems that mmsys_sw_rst_b reg has different names for different
> > > SoCs?
> > > I mean I know that for MT8173 and MT8183 the register is called
> > > mmsys_sw0_rst_b but looks like for MT8195 the name is
> > > vdo1_sw0_rst_b?
> > > So maybe we should update this comment to be more generic.
> > >
> >
> > Yes, the name of MT8195 vdosys1 sw reset is called
> > VDOSYS1_SW0_RST_B
> > and the name of vdosys0 sw reset is called GLOBAL0_SW0_RST_B. They
> > have
> > a different name. Maybe we can change the comment to "protects
> > mmsys sw
> > reset reg".
> >
> > > >
> > > > + struct reset_controller_dev rcdev;
> > > > };
> > > >
> > > > void mtk_mmsys_ddp_connect(struct device *dev,
> > > > @@ -148,6 +155,63 @@ void mtk_mmsys_ddp_config(struct device
> > > > *dev,
> > > > enum mtk_mmsys_config_type config,
> > > > }
> > > > EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_config);
> > > >
> > > > +static int mtk_mmsys_reset_update(struct reset_controller_dev
> > > > *rcdev, unsigned long id,
> > > > + bool assert)
> > > > +{
> > > > + struct mtk_mmsys *mmsys = container_of(rcdev, struct
> > > > mtk_mmsys, rcdev);
> > > > + unsigned long flags;
> > > > + u32 reg;
> > > > + int i;
> > > > + u32 offset;
> > > > +
> > > > + offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
> > > > + id = 1 << (id % MMSYS_SW_RESET_PER_REG);
> > > > +
> > > > + spin_lock_irqsave(&mmsys->lock, flags);
> > > > +
> > > > + reg = readl_relaxed(mmsys->regs + mmsys->data-
> > > > > sw_reset_start + offset);
> > > >
> > > > +
> > > > + if (assert)
> > > > + reg &= ~BIT(id);
> > > > + else
> > > > + reg |= BIT(id);
> > > > +
> > > > + writel_relaxed(reg, mmsys->regs + mmsys->data-
> > > > > sw_reset_start + offset);
> > > >
> > > > +
> > > > + spin_unlock_irqrestore(&mmsys->lock, flags);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int mtk_mmsys_reset_assert(struct reset_controller_dev
> > > > *rcdev, unsigned long id)
> > > > +{
> > > > + return mtk_mmsys_reset_update(rcdev, id, true);
> > > > +}
> > > > +
> > > > +static int mtk_mmsys_reset_deassert(struct
> > > > reset_controller_dev
> > > > *rcdev, unsigned long id)
> > > > +{
> > > > + return mtk_mmsys_reset_update(rcdev, id, false);
> > > > +}
> > > > +
> > > > +static int mtk_mmsys_reset(struct reset_controller_dev *rcdev,
> > > > unsigned long id)
> > > > +{
> > > > + int ret;
> > > > +
> > > > + ret = mtk_mmsys_reset_assert(rcdev, id);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > + usleep_range(1000, 1100);
> > > > +
> > >
> > > One question that I received in my series, and I couldn't answer
> > > because I don't have the datasheet, is if
> > > is this known to be enough for all IP cores that can be reset by
> > > this
> > > controller? Is this time specified in the datasheet?
> >
> > It only takes few cycles for the reset. The 1000us is enough for
> > the
> > reset to take effect.
> >
>
> Saying enough looks to me that 1000us is a random number, is there
> any
> specific real number in the datasheet?
>
> Note that I'm not against it, just want to make sure the number makes
> sense.
>
No real number is specified in the datasheet. I checked with the
hardware designer, and the reset takes four cycles of mm IP cores.
For example: If the mm IP cores run at 200MHz, it will take
20ns(4/200M) for the reset to take effect.
>
> > > > + return mtk_mmsys_reset_deassert(rcdev, id);
> > > > +}
> > > > +
> > > > +static const struct reset_control_ops mtk_mmsys_reset_ops = {
> > > > + .assert = mtk_mmsys_reset_assert,
> > > > + .deassert = mtk_mmsys_reset_deassert,
> > > > + .reset = mtk_mmsys_reset,
> > > > +};
> > > > +
> > > > static int mtk_mmsys_probe(struct platform_device *pdev)
> > > > {
> > > > struct device *dev = &pdev->dev;
> > > > @@ -174,6 +238,19 @@ static int mtk_mmsys_probe(struct
> > > > platform_device *pdev)
> > > > if (ret)
> > > > dev_dbg(dev, "No mediatek,gce-client-reg!\n");
> > > > #endif
> > > > +
> > > > + spin_lock_init(&mmsys->lock);
> > > > +
> > > > + mmsys->rcdev.owner = THIS_MODULE;
> > > > + mmsys->rcdev.nr_resets = 64;
> > >
> > > Is the number of resets 64 for MT8195? I think is 32 for MT8173
> > > and
> > > MT8183. Can you confirm?
> > >
> > > Thanks,
> > > Enric
> > >
> >
> > The number of resets in MT8195 vdosys1 is 64 (43 resets are used,
> > 21
> > are not used).
> >
>
> Ok, thanks for the information.
>
> > > > + mmsys->rcdev.ops = &mtk_mmsys_reset_ops;
> > > > + mmsys->rcdev.of_node = pdev->dev.of_node;
> > > > + ret = devm_reset_controller_register(&pdev->dev,
> > > > &mmsys-
> > > > > rcdev);
> > > >
> > > > + if (ret) {
> > > > + dev_err(&pdev->dev, "Couldn't register mmsys
> > > > reset
> > > > controller: %d\n", ret);
> > > > + return ret;
> > > > + }
> > > > +
> > > > platform_set_drvdata(pdev, mmsys);
> > > >
> > > > clks = platform_device_register_data(&pdev->dev, mmsys-
> > > > > data->clk_driver,
> > > >
> > > > diff --git a/drivers/soc/mediatek/mtk-mmsys.h
> > > > b/drivers/soc/mediatek/mtk-mmsys.h
> > > > index 084b1f5f3c88..cc57c3895c51 100644
> > > > --- a/drivers/soc/mediatek/mtk-mmsys.h
> > > > +++ b/drivers/soc/mediatek/mtk-mmsys.h
> > > > @@ -87,6 +87,7 @@ struct mtk_mmsys_driver_data {
> > > > const unsigned int num_routes;
> > > > const struct mtk_mmsys_config *config;
> > > > const unsigned int num_configs;
> > > > + u32 sw_reset_start;
> > > > };
> > > >
> > > > /*
> > > > --
> > > > 2.18.0
> > > >
More information about the dri-devel
mailing list