[Freedreno] [RFC PATCH 00/13] drm/msm: Add Display Stream Compression Support

[Rob Clark]

On Wed, Jun 2, 2021 at 4:01 AM Vinod Koul <vkoul at kernel.org> wrote:
>
> On 27-05-21, 16:30, Rob Clark wrote:
> > On Wed, May 26, 2021 at 8:00 AM Jeffrey Hugo <jeffrey.l.hugo at gmail.com> wrote:
> > > On Tue, May 25, 2021 at 11:46 PM Vinod Koul <vkoul at kernel.org> wrote:
>
> > > Frankly, I don't like the MSM ACPI solution that I've seen on the laptops.
> > > The ACPI assumes the entire MDSS (including DSI parts) and GPU is one
> > > device, and ultimately handled by one driver.  That driver needs to
> > > get a value from UEFI (set by the bootloader) that is the "panel id".
> > > Then the driver calls into ACPI (I think its _ROM, but I might be
> > > mistaken, doing this from memory) with that id.  It gets back a binary
> > > blob which is mostly an xml file (format is publicly documented) that
> > > contains the panel timings and such.
> >
> > tbh, I kinda suspect that having a single "gpu" device (which also
> > includes venus, in addition to display, IIRC) in the ACPI tables is a
> > windowsism, trying to make things look to userspace like a single "GPU
> > card" in the x86 world.. but either way, I think the ACPI tables on
> > the windows arm laptops which use dsi->bridge->edp is too much of a
> > lost cause to even consider here.  Possibly ACPI boot on these devices
> > would be more feasible on newer devices which have direct eDP out of
> > the SoC without requiring external bridge/panel glue.
>
> yeah that is always a very different world. although it might make sense
> to use information in tables and try to deduce information about the
> system can be helpful...
>
> > I'd worry more about what makes sense in a DT world, when it comes to
> > DT bindings.
>
> And do you have thoughts on that..?

Only that I wouldn't get too hung up on existing snapdragon ACPI
tables.. not sure if there is prior art as far as ACPI tables for this
on x86 systems, if so that *might* be a thing to consider, but
otherwise it does sound a bit like we want less qcom specific bindings
here.  But other than that I'll leave it to folks who spend more time
thinking about bindings.. left to my own devices I'd come up with a
point solution and go back to working on mesa, so that probably isn't
the opinion you want to follow ;-)

BR,
-R