[PATCH] drm/i915: only disable default vga device

Emil Velikov emil.l.velikov at gmail.com
Fri Jun 4 15:53:28 UTC 2021


On Fri, 4 Jun 2021 at 15:08, Ville Syrjälä
<ville.syrjala at linux.intel.com> wrote:
>
> On Fri, Jun 04, 2021 at 02:47:16PM +0100, Emil Velikov wrote:
> > On Wed, 26 May 2021 at 17:21, Emil Velikov <emil.l.velikov at gmail.com> wrote:
> > >
> > > Hi Ville,
> > >
> > > On Tue, 18 May 2021 at 12:17, Ville Syrjälä
> > > <ville.syrjala at linux.intel.com> wrote:
> > > >
> > > > On Tue, May 18, 2021 at 12:09:56PM +0100, Emil Velikov wrote:
> > > > > Hi Ville,
> > > > >
> > > > > On Mon, 17 May 2021 at 18:24, Ville Syrjälä
> > > > > <ville.syrjala at linux.intel.com> wrote:
> > > > > >
> > > > > > On Sun, May 16, 2021 at 06:14:32PM +0100, Emil Velikov wrote:
> > > > > > > From: Vivek Das Mohapatra <vivek at collabora.com>
> > > > > > >
> > > > > > > This patch is to do with seamless handover, eg when the sequence is
> > > > > > > bootloader → plymouth → desktop.
> > > > > > >
> > > > > > > It switches the vga arbiter from the "other" GPU to the default one
> > > > > > > (intel in this case), so the driver can issue some io().
> > > > > >
> > > > > > I don't understand what this commit message is trying to say.
> > > > > >
> > > > > Bunch of context is lost due to the patch age, so I'm not 100% sure of
> > > > > the actual hardware setup where this occurs.
> > > > > Does the following make sense?
> > > > >
> > > > > Currently on dual GPU systems, we do not get seamless handover as the
> > > > > output flickers during the transition bootloader -> plymouth ->
> > > > > desktop.
> > > > > This happens as a result of switching (via the VGA arbiter) from the
> > > > > "other" GPU back to the default i915 one and issuing io() commands.
> > > >
> > > > Hmm. Does this work?
> > > >
> > > > --- a/drivers/gpu/drm/i915/display/intel_vga.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_vga.c
> > > > @@ -29,6 +29,9 @@ void intel_vga_disable(struct drm_i915_private *dev_priv)
> > > >         i915_reg_t vga_reg = intel_vga_cntrl_reg(dev_priv);
> > > >         u8 sr1;
> > > >
> > > > +       if (intel_de_read(dev_priv, vga_reg) & VGA_DISP_DISABLE)
> > > > +               return;
> > > > +
> > > >         /* WaEnableVGAAccessThroughIOPort:ctg,elk,ilk,snb,ivb,vlv,hsw */
> > > >         vga_get_uninterruptible(pdev, VGA_RSRC_LEGACY_IO);
> > > >         outb(SR01, VGA_SR_INDEX);
> > > >
> > > Was able to replicate the issue somewhat and the above does help quite a lot.
> > > Feel free to add my:
> > > Reviewed-by: Emil Velikov <emil.velikov at collabora.com>
> > > Tested-by: Emil Velikov <emil.velikov at collabora.com>
> > >
> > Humble poke.
> >
> > Cannot see this patch in the drm-misc or drm-intel trees. Is there
> > anything I do to help move it forward?
>
> Can you just respin the patch with this?
>
I've used your suggestion and redone the commit message completely.
Hope it's far less cryptic now.
Patch is on the ML - realised I didn't CC you, just as it went out.

https://lore.kernel.org/dri-devel/20210604154905.660142-1-emil.l.velikov@gmail.com/T/#u

Thanks
-Emil


More information about the dri-devel mailing list