[PATCH] drm: Don't test for IRQ support in VBLANK ioctls

Thomas Zimmermann tzimmermann at suse.de
Tue Jun 8 09:03:01 UTC 2021


Replace the IRQ check in VBLANK ioctls with a check for vblank
support. IRQs might be enabled wthout vblanking being supported.

This change also removes the DRM framework's only dependency on
IRQ state for non-legacy drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann at suse.de>
---
 drivers/gpu/drm/drm_irq.c    | 10 +++-------
 drivers/gpu/drm/drm_vblank.c |  6 +++---
 2 files changed, 6 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index c3bd664ea733..1d7785721323 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -74,10 +74,8 @@
  * only supports devices with a single interrupt on the main device stored in
  * &drm_device.dev and set as the device paramter in drm_dev_alloc().
  *
- * These IRQ helpers are strictly optional. Drivers which roll their own only
- * need to set &drm_device.irq_enabled to signal the DRM core that vblank
- * interrupts are working. Since these helpers don't automatically clean up the
- * requested interrupt like e.g. devm_request_irq() they're not really
+ * These IRQ helpers are strictly optional. Since these helpers don't automatically
+ * clean up the requested interrupt like e.g. devm_request_irq() they're not really
  * recommended.
  */
 
@@ -91,9 +89,7 @@
  * and after the installation.
  *
  * This is the simplified helper interface provided for drivers with no special
- * needs. Drivers which need to install interrupt handlers for multiple
- * interrupts must instead set &drm_device.irq_enabled to signal the DRM core
- * that vblank interrupts are available.
+ * needs.
  *
  * @irq must match the interrupt number that would be passed to request_irq(),
  * if called directly instead of using this helper function.
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c
index 3417e1ac7918..165286fef478 100644
--- a/drivers/gpu/drm/drm_vblank.c
+++ b/drivers/gpu/drm/drm_vblank.c
@@ -1748,7 +1748,7 @@ int drm_wait_vblank_ioctl(struct drm_device *dev, void *data,
 	unsigned int pipe_index;
 	unsigned int flags, pipe, high_pipe;
 
-	if (!dev->irq_enabled)
+	if (!drm_dev_has_vblank(dev))
 		return -EOPNOTSUPP;
 
 	if (vblwait->request.type & _DRM_VBLANK_SIGNAL)
@@ -2023,7 +2023,7 @@ int drm_crtc_get_sequence_ioctl(struct drm_device *dev, void *data,
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EOPNOTSUPP;
 
-	if (!dev->irq_enabled)
+	if (!drm_dev_has_vblank(dev))
 		return -EOPNOTSUPP;
 
 	crtc = drm_crtc_find(dev, file_priv, get_seq->crtc_id);
@@ -2082,7 +2082,7 @@ int drm_crtc_queue_sequence_ioctl(struct drm_device *dev, void *data,
 	if (!drm_core_check_feature(dev, DRIVER_MODESET))
 		return -EOPNOTSUPP;
 
-	if (!dev->irq_enabled)
+	if (!drm_dev_has_vblank(dev))
 		return -EOPNOTSUPP;
 
 	crtc = drm_crtc_find(dev, file_priv, queue_seq->crtc_id);
-- 
2.31.1



More information about the dri-devel mailing list