[PATCH v9 11/11] arm64: dts: qcom: sc7180-trogdor: Move panel under the bridge chip

[Bjorn Andersson]

On Mon 07 Jun 12:05 CDT 2021, Douglas Anderson wrote:

> Putting the panel under the bridge chip (under the aux-bus node)
> allows the panel driver to get access to the DP AUX bus, enabling all
> sorts of fabulous new features.
> 
> While we're at this, get rid of a level of hierarchy for the panel
> node. It doesn't need "ports / port" and can just have a "port" child.
> 
> For Linux, this patch has a hard requirement on the patches adding DP
> AUX bus support to the ti-sn65dsi86 bridge chip driver. See the patch
> ("drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus").
> 
> Signed-off-by: Douglas Anderson <dianders at chromium.org>
> Acked-by: Linus Walleij <linus.walleij at linaro.org>

In case you want to merge this together with the driver changes
(even though there's no direct need for them to go together):

Acked-by: Bjorn Andersson <bjorn.andersson at linaro.org>

Regards,
Bjorn

> ---
> 
> (no changes since v7)
> 
> Changes in v7:
> - Panel now under bridge chip instead of getting a link to ddc-i2c
> 
>  arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 30 ++++++++++----------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 24d293ef56d7..c76afd857b54 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -260,21 +260,6 @@ max98357a: audio-codec-0 {
>  		#sound-dai-cells = <0>;
>  	};
>  
> -	panel: panel {
> -		/* Compatible will be filled in per-board */
> -		power-supply = <&pp3300_dx_edp>;
> -		backlight = <&backlight>;
> -		hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> -
> -		ports {
> -			port {
> -				panel_in_edp: endpoint {
> -					remote-endpoint = <&sn65dsi86_out>;
> -				};
> -			};
> -		};
> -	};
> -
>  	pwmleds {
>  		compatible = "pwm-leds";
>  		keyboard_backlight: keyboard-backlight {
> @@ -674,6 +659,21 @@ sn65dsi86_out: endpoint {
>  				};
>  			};
>  		};
> +
> +		aux-bus {
> +			panel: panel {
> +				/* Compatible will be filled in per-board */
> +				power-supply = <&pp3300_dx_edp>;
> +				backlight = <&backlight>;
> +				hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> +
> +				port {
> +					panel_in_edp: endpoint {
> +						remote-endpoint = <&sn65dsi86_out>;
> +					};
> +				};
> +			};
> +		};
>  	};
>  };
>  
> -- 
> 2.32.0.rc1.229.g3e70b5a671-goog
>