[PATCH v4 22/24] drm/msm/dsi: remove temp data from global pll structure

[Dmitry Baryshkov]

Hi,

On Fri, 11 Jun 2021 at 10:07, John Stultz <john.stultz at linaro.org> wrote:
>
> On Wed, Mar 31, 2021 at 3:58 AM Dmitry Baryshkov
> <dmitry.baryshkov at linaro.org> wrote:
> >
> > The 7nm, 10nm and 14nm drivers would store interim data used during
> > VCO/PLL rate setting in the global dsi_pll_Nnm structure. Move this data
> > structures to the onstack storage. While we are at it, drop
> > unused/static 'config' data, unused config fields, etc.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > Reviewed-by: Abhinav Kumar <abhinavk at codeaurora.org>
> > Tested-by: Stephen Boyd <swboyd at chromium.org> # on sc7180 lazor
>
> Hey Dmitry,
>   Just wanted to give you a heads up.  Peter Collingbourne reported
> today that his db845c wasn't booting to display for him on his 4k
> monitor. It works fine on a 1080p screen, and while 4k isn't supported
> (yet?),  normally the board should fall back to 1080p when connected
> to a 4k monitor.  I was able to reproduce this myself and I see the
> errors below[1].

It looks like I made a mistake testing these patches with the splash
screen disabled.
Stephen Boyd has proposed a fix few days ago (will be included into
the 5.13). Could you check that it fixes the problem for you?

https://lore.kernel.org/linux-arm-msm/20210608195519.125561-1-swboyd@chromium.org/

>
> I dug back and found that things were working ok on v5.12 w/ the
> recently merged commit d1a97648ae028 ("drm/bridge: lt9611: Fix
> handling of 4k panels"), and started digging around.
>
> Seeing a bunch of changes to the
> drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c file, I tried reverting a
> chunk of the changes since 5.12 to that, and that got it working
> again. I've narrowed it down to this change -
> 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll
> structure") upstream (also reverting following 6e2ad9c3bfca and
> 36c5dde5fdf0 first - but its reverting this change that actually makes
> it work again).
>
> I've not managed to really look into the change to see what might be
> going wrong yet (its late and I'm about to crash), but I wanted to
> give you a heads up. If you have any ideas for me to try I'm happy to
> give them a go.
>
> thanks
> -john
>
> [1]:
> [   19.846857] msm_dsi_phy ae94400.dsi-phy:
> [drm:dsi_pll_10nm_vco_prepare] *ERROR* DSI PLL(0) lock failed,
> status=0x00000000
> [   19.857925] msm_dsi_phy ae94400.dsi-phy:
> [drm:dsi_pll_10nm_vco_prepare] *ERROR* PLL(0) lock failed
> [   19.866978] dsi_link_clk_enable_6g: Failed to enable dsi byte clk
> [   19.873124] msm_dsi_host_power_on: failed to enable link clocks. ret=-110
> [   19.879987] dsi_mgr_bridge_pre_enable: power on host 0 failed, -110
> [   19.886309] Turning OFF PHY while PLL is on
> [   20.415019] lt9611 10-003b: video check: hactive_a=0, hactive_b=0,
> vactive=0, v_total=0, h_total_sysclk=0
> [   20.481062] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> [   20.489306] [drm:dpu_kms_wait_for_commit_done:453] [dpu error]wait
> for commit done returned -110
> [   20.513031] [drm:dpu_encoder_frame_done_timeout:2161] [dpu
> error]enc31 frame done timeout
> [   20.553059] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> [   20.561300] [drm:dpu_kms_wait_for_commit_done:453] [dpu error]wait
> for commit done returned -110
> [   20.625054] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> [   20.633299] [drm:dpu_kms_wait_for_commit_done:453] [dpu error]wait
> for commit done returned -110
> [   20.657033] [drm:dpu_encoder_frame_done_timeout:2161] [dpu
> error]enc31 frame done timeout
> [   20.697065] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> [   20.705316] [drm:dpu_kms_wait_for_commit_done:453] [dpu error]wait
> for commit done returned -110
> [   20.769066] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> [   20.777330] [drm:dpu_kms_wait_for_commit_done:453] [dpu error]wait
> for commit done returned -110
> [   20.801035] [drm:dpu_encoder_frame_done_timeout:2161] [dpu
> error]enc31 frame done timeout
> [   20.845049] [drm:dpu_encoder_phys_vid_wait_for_commit_done:528]
> [dpu error]vblank timeout
> ...



-- 
With best wishes
Dmitry