[RESEND PATCH 2/3] drm/panel: Add connector_type for some EDT displays

[Stefan Riedmueller]

The connector_type for following two EDT displays is missing:
 - EDT ETM0430G0DH6
 - EDT ETM0700G0BDH6

Both are parallel displays thus add the corresponding connector_type.

Signed-off-by: Stefan Riedmueller <s.riedmueller at phytec.de>
---
 drivers/gpu/drm/panel/panel-simple.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 99edd640d700..109dc8c85947 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1940,6 +1940,7 @@ static const struct panel_desc edt_etm0430g0dh6 = {
 		.width = 95,
 		.height = 54,
 	},
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
 static const struct drm_display_mode edt_et057090dhu_mode = {
@@ -2004,6 +2005,7 @@ static const struct panel_desc edt_etm0700g0bdh6 = {
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
 };
 
 static const struct display_timing evervision_vgg804821_timing = {
-- 
2.25.1