[PATCH v2 0/2] R-Car DU: Add DSI encoder driver for V3U

[Sam Ravnborg]

Hi Laurent,
On Wed, Jun 23, 2021 at 04:56:37PM +0300, Laurent Pinchart wrote:
> Hello,
> 
> This patch series adds a driver for the DSI encoder found in the R-Car
> V3U SoC, which is the first SoC in the family that supports DSI.
> 
> The driver is based on an implementation from the BSP written by Luu
> Hoai, with lots of further rework. If anyone is interested in the
> history, a broken down v1 is available from [1].
> 
> The driver has been successfully tested on the Falcon board, which
> connects an SN65DSI86 to the output of the DSI encoder. Further patches
> are needed for the ti-sn65dsi86 driver to enable usage in plain DP
> (non-eDP) mode, as the Falcon board has a mini-DP connector wired to the
> output of the SN65DSI86. This is work in progress (see [2]).
> 
> [1] https://lore.kernel.org/linux-renesas-soc/189c7a07-29cd-39f4-1dec-56aa94c11fba@ideasonboard.com/T/#mafbe130386cbc8326f85cad46860813516ef4a80
> [2] https://lore.kernel.org/linux-renesas-soc/20210322030128.2283-1-laurent.pinchart+renesas@ideasonboard.com/
> 
> LUU HOAI (1):
>   drm: rcar-du: Add R-Car DSI driver
> 
> Laurent Pinchart (1):
>   dt-bindings: display: bridge: Add binding for R-Car MIPI DSI/CSI-2 TX

I have browsed both patches. Both looks good:

Acked-by: Sam Ravnborg <sam at ravnborg.org>

	Sam