[v8 4/6] drm/panel-simple: Update validation warnings for eDP panel description

[Laurent Pinchart]

Hi Rajeev,

On Sat, Jun 26, 2021 at 10:21:06PM +0530, Rajeev Nandan wrote:
> Do not give a warning for the eDP panels if the "bus_format" is
> not specified, since most eDP panels can support more than one
> bus formats and this can be auto-detected.
> Also, update the check to include bpc=10 for the eDP panel.
> 
> Signed-off-by: Rajeev Nandan <rajeevny at codeaurora.org>
> ---
> 
> Changes in v8:
> - New patch, to address the review comments of Sam Ravnborg [1]
> 
> [1] https://lore.kernel.org/dri-devel/20210621184157.GB918146@ravnborg.org/
> 
>  drivers/gpu/drm/panel/panel-simple.c | 6 ++----
>  1 file changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 86e5a45..f966b562 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -772,10 +772,8 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc,
>  			desc->bpc != 8);
>  		break;
>  	case DRM_MODE_CONNECTOR_eDP:
> -		if (desc->bus_format == 0)
> -			dev_warn(dev, "Specify missing bus_format\n");
> -		if (desc->bpc != 6 && desc->bpc != 8)
> -			dev_warn(dev, "Expected bpc in {6,8} but got: %u\n", desc->bpc);
> +		if (desc->bpc != 6 && desc->bpc != 8 && desc->bpc != 10)
> +			dev_warn(dev, "Expected bpc in {6,8,10} but got: %u\n", desc->bpc);

You'll still get a warning is bpc == 0, is that intentional ?

>  		break;
>  	case DRM_MODE_CONNECTOR_DSI:
>  		if (desc->bpc != 6 && desc->bpc != 8)

-- 
Regards,

Laurent Pinchart