[PATCH v2] drm/panfrost:report the full raw fault information instead

Chunyou Tang tangchunyou at 163.com
Tue Jun 29 03:04:53 UTC 2021 

Hi Steve,
	thinks for your reply.
	I set the pte in arm_lpae_prot_to_pte(),
***********************************************************************
	/*
	 * Also Mali has its own notions of shareability wherein its
Inner
	 * domain covers the cores within the GPU, and its Outer domain
is
	 * "outside the GPU" (i.e. either the Inner or System domain in
CPU
	 * terms, depending on coherency).
	 */
	if (prot & IOMMU_CACHE && data->iop.fmt != ARM_MALI_LPAE)
		pte |= ARM_LPAE_PTE_SH_IS;
	else
		pte |= ARM_LPAE_PTE_SH_OS;
***********************************************************************
I set pte |= ARM_LPAE_PTE_SH_NS.

	If I set pte to ARM_LPAE_PTE_SH_OS or
	ARM_LPAE_PTE_SH_IS,whether I use singel core GPU or multi core
	GPU,it will occur GPU Fault.
	if I set pte to ARM_LPAE_PTE_SH_NS,whether I use singel core
	GPU or multi core GPU,it will not occur GPU Fault.

Thinks

Chunyou

于 Mon, 28 Jun 2021 11:48:59 +0100
Steven Price <steven.price at arm.com> 写道:

> On 25/06/2021 10:49, Chunyou Tang wrote:
> > Hi Steve,
> > 	Thinks for your reply.
> > 	When I only set the pte |= ARM_LPAE_PTE_SH_NS;there have no
> > "GPU Fault",When I set the pte |= ARM_LPAE_PTE_SH_IS(or
> > ARM_LPAE_PTE_SH_OS);there have "GPU Fault".I don't know how the pte
> > effect this issue?
> > 	Can you give me some suggestions again?
> > 
> > Thinks.
> > 
> > Chunyou
> 
> Hi Chunyou,
> 
> You haven't given me much context so I'm not entirely sure which PTE
> you are talking about (GPU or CPU), or indeed where you are changing
> the PTE values.
> 
> The PTEs control whether a page is shareable or not, the GPU requires
> that accesses are consistent (i.e. either all accesses to a page are
> shareable or all are non-shareable) and will race a fault if it
> detects this isn't the case. Mali also has a quirk for its version of
> 'LPAE' where inner shareable actually means only within the GPU and
> outer shareable means outside the GPU (which I think usually means
> Inner Shareable on the external bus).
> 
> Steve
> 
> > 于 Thu, 24 Jun 2021 14:22:04 +0100
> > Steven Price <steven.price at arm.com> 写道:
> > 
> >> On 22/06/2021 02:40, Chunyou Tang wrote:
> >>> Hi Steve,
> >>> 	I will send a new patch with suitable subject/commit
> >>> message. But I send a V3 or a new patch?
> >>
> >> Send a V3 - it is a new version of this patch.
> >>
> >>> 	I met a bug about the GPU,I have no idea about how to fix
> >>> it, If you can give me some suggestion,it is perfect.
> >>>
> >>> You can see such kernel log:
> >>>
> >>> Jun 20 10:20:13 icube kernel: [  774.566760] mvp_gpu 0000:05:00.0:
> >>> GPU Fault 0x00000088 (SHAREABILITY_FAULT) at 0x000000000310fd00
> >>> Jun 20 10:20:13 icube kernel: [  774.566764] mvp_gpu 0000:05:00.0:
> >>> There were multiple GPU faults - some have not been reported Jun
> >>> 20 10:20:13 icube kernel: [  774.667542] mvp_gpu 0000:05:00.0:
> >>> AS_ACTIVE bit stuck Jun 20 10:20:13 icube kernel: [  774.767900]
> >>> mvp_gpu 0000:05:00.0: AS_ACTIVE bit stuck Jun 20 10:20:13 icube
> >>> kernel: [  774.868546] mvp_gpu 0000:05:00.0: AS_ACTIVE bit stuck
> >>> Jun 20 10:20:13 icube kernel: [  774.968910] mvp_gpu 0000:05:00.0:
> >>> AS_ACTIVE bit stuck Jun 20 10:20:13 icube kernel: [  775.069251]
> >>> mvp_gpu 0000:05:00.0: AS_ACTIVE bit stuck Jun 20 10:20:22 icube
> >>> kernel: [  783.693971] mvp_gpu 0000:05:00.0: gpu sched timeout,
> >>> js=1, config=0x7300, status=0x8, head=0x362c900, tail=0x362c100,
> >>> sched_job=000000003252fb84
> >>>
> >>> In
> >>> https://lore.kernel.org/dri-devel/20200510165538.19720-1-peron.clem@gmail.com/
> >>> there had a same bug like mine,and I found you at the mail list,I
> >>> don't know how it fixed?
> >>
> >> The GPU_SHAREABILITY_FAULT error means that a cache line has been
> >> accessed both as shareable and non-shareable and therefore
> >> coherency cannot be guaranteed. Although the "multiple GPU faults"
> >> means that this may not be the underlying cause.
> >>
> >> The fact that your dmesg log has PCI style identifiers
> >> ("0000:05:00.0") suggests this is an unusual platform - I've not
> >> previously been aware of a Mali device behind PCI. Is this device
> >> working with the kbase/DDK proprietary driver? It would be worth
> >> looking at the kbase kernel code for the platform to see if there
> >> is anything special done for the platform.
> >>
> >> From the dmesg logs all I can really tell is that the GPU seems
> >> unhappy about the memory system.
> >>
> >> Steve
> >>
> >>> I need your help!
> >>>
> >>> thinks very much!
> >>>
> >>> Chunyou
> >>>
> >>> 于 Mon, 21 Jun 2021 11:45:20 +0100
> >>> Steven Price <steven.price at arm.com> 写道:
> >>>
> >>>> On 19/06/2021 04:18, Chunyou Tang wrote:
> >>>>> Hi Steve,
> >>>>> 	1,Now I know how to write the subject
> >>>>> 	2,the low 8 bits is the exception type in spec.
> >>>>>
> >>>>> and you can see prnfrost_exception_name()
> >>>>>
> >>>>> switch (exception_code) {
> >>>>>                 /* Non-Fault Status code */
> >>>>> case 0x00: return "NOT_STARTED/IDLE/OK";
> >>>>> case 0x01: return "DONE";
> >>>>> case 0x02: return "INTERRUPTED";
> >>>>> case 0x03: return "STOPPED";
> >>>>> case 0x04: return "TERMINATED";
> >>>>> case 0x08: return "ACTIVE";
> >>>>> ........
> >>>>> ........
> >>>>> case 0xD8: return "ACCESS_FLAG";
> >>>>> case 0xD9 ... 0xDF: return "ACCESS_FLAG";
> >>>>> case 0xE0 ... 0xE7: return "ADDRESS_SIZE_FAULT";
> >>>>> case 0xE8 ... 0xEF: return "MEMORY_ATTRIBUTES_FAULT";
> >>>>> }
> >>>>> return "UNKNOWN";
> >>>>> }
> >>>>>
> >>>>> the exception_code in case is only 8 bits,so if fault_status
> >>>>> in panfrost_gpu_irq_handler() don't & 0xFF,it can't get correct
> >>>>> exception reason,it will be always UNKNOWN.
> >>>>
> >>>> Yes, I'm happy with the change - I just need a patch that I can
> >>>> apply. At the moment this patch only changes the first '0x%08x'
> >>>> output rather than the call to panfrost_exception_name() as well.
> >>>> So we just need a patch which does:
> >>>>
> >>>> - fault_status & 0xFF, panfrost_exception_name(pfdev,
> >>>> fault_status),
> >>>> + fault_status, panfrost_exception_name(pfdev, fault_status &
> >>>> 0xFF),
> >>>>
> >>>> along with a suitable subject/commit message describing the
> >>>> change. If you can send me that I can apply it.
> >>>>
> >>>> Thanks,
> >>>>
> >>>> Steve
> >>>>
> >>>> PS. Sorry for going round in circles here - I'm trying to help
> >>>> you get setup so you'll be able to contribute patches easily in
> >>>> future. An important part of that is ensuring you can send a
> >>>> properly formatted patch to the list.
> >>>>
> >>>> PPS. I'm still not receiving your emails directly. I don't think
> >>>> it's a problem at my end because I'm receiving other emails, but
> >>>> if you can somehow fix the problem you're likely to receive a
> >>>> faster response.
> >>>>
> >>>>> 于 Fri, 18 Jun 2021 13:43:24 +0100
> >>>>> Steven Price <steven.price at arm.com> 写道:
> >>>>>
> >>>>>> On 17/06/2021 07:20, ChunyouTang wrote:
> >>>>>>> From: ChunyouTang <tangchunyou at icubecorp.cn>
> >>>>>>>
> >>>>>>> of the low 8 bits.
> >>>>>>
> >>>>>> Please don't split the subject like this. The first line of the
> >>>>>> commit should be a (very short) summary of the patch. Then a
> >>>>>> blank line and then a longer description of what the purpose of
> >>>>>> the patch is and why it's needed.
> >>>>>>
> >>>>>> Also you previously had this as part of a series (the first
> >>>>>> part adding the "& 0xFF" in the panfrost_exception_name()
> >>>>>> call). I'm not sure we need two patches for the single line,
> >>>>>> but as it stands this patch doesn't apply.
> >>>>>>
> >>>>>> Also I'm still not receiving any emails from you directly (only
> >>>>>> via the list), so it's possible I might have missed something
> >>>>>> you sent.
> >>>>>>
> >>>>>> Steve
> >>>>>>
> >>>>>>>
> >>>>>>> Signed-off-by: ChunyouTang <tangchunyou at icubecorp.cn>
> >>>>>>> ---
> >>>>>>>  drivers/gpu/drm/panfrost/panfrost_gpu.c | 2 +-
> >>>>>>>  1 file changed, 1 insertion(+), 1 deletion(-)
> >>>>>>>
> >>>>>>> diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c
> >>>>>>> b/drivers/gpu/drm/panfrost/panfrost_gpu.c index
> >>>>>>> 1fffb6a0b24f..d2d287bbf4e7 100644 ---
> >>>>>>> a/drivers/gpu/drm/panfrost/panfrost_gpu.c +++
> >>>>>>> b/drivers/gpu/drm/panfrost/panfrost_gpu.c @@ -33,7 +33,7 @@
> >>>>>>> static irqreturn_t panfrost_gpu_irq_handler(int irq, void
> >>>>>>> *data) address |= gpu_read(pfdev, GPU_FAULT_ADDRESS_LO); 
> >>>>>>>  		dev_warn(pfdev->dev, "GPU Fault 0x%08x (%s)
> >>>>>>> at 0x%016llx\n",
> >>>>>>> -			 fault_status & 0xFF,
> >>>>>>> panfrost_exception_name(pfdev, fault_status & 0xFF),
> >>>>>>> +			 fault_status,
> >>>>>>> panfrost_exception_name(pfdev, fault_status & 0xFF), address);
> >>>>>>>  
> >>>>>>>  		if (state & GPU_IRQ_MULTIPLE_FAULT)
> >>>>>>>
> >>>>>
> >>>>>
> >>>
> >>>
> > 
> >

More information about the dri-devel mailing list