[PATCH 1/4] drm/vc4: hdmi: Mark the device as active if running

[Maxime Ripard]

If we detect the device as running we make sure we get the reference
count right for clocks, but we don't do as such for the runtime PM
count, let's call pm_runtime_enable to make sure it's accurate.

Fixes: 5b0060004236 ("drm/vc4: hdmi: Prevent clock unbalance")
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index aab1b36ceb3c..707fe43ffeea 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -2182,6 +2182,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	if ((of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi0") ||
 	     of_device_is_compatible(dev->of_node, "brcm,bcm2711-hdmi1")) &&
 	    HDMI_READ(HDMI_VID_CTL) & VC4_HD_VID_CTL_ENABLE) {
+		pm_runtime_set_active(dev);
 		clk_prepare_enable(vc4_hdmi->pixel_clock);
 		clk_prepare_enable(vc4_hdmi->hsm_clock);
 		clk_prepare_enable(vc4_hdmi->pixel_bvb_clock);
-- 
2.31.1