[PATCH v4 2/2] drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge
Jagan Teki
jagan at amarulasolutions.com
Thu Mar 4 09:21:33 UTC 2021
ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.
It has a flexible configuration of MIPI DSI signal input and
produce RGB565, RGB666, RGB888 output format.
Add bridge driver for it.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v4:
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated the driver to inline with new drm bridge style
MAINTAINERS | 1 +
drivers/gpu/drm/bridge/Kconfig | 13 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/chipone-icn6211.c | 293 +++++++++++++++++++++++
4 files changed, 308 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/chipone-icn6211.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 065cbdc889d3..9c59402e51bc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5533,6 +5533,7 @@ DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
M: Jagan Teki <jagan at amarulasolutions.com>
S: Maintained
F: Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+F: drivers/gpu/drm/bridge/chipone-icn6211.c
DRM DRIVER FOR FARADAY TVE200 TV ENCODER
M: Linus Walleij <linus.walleij at linaro.org>
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index e4110d6ca7b3..330ee70ed746 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -27,6 +27,19 @@ config DRM_CDNS_DSI
Support Cadence DPI to DSI bridge. This is an internal
bridge and is meant to be directly embedded in a SoC.
+config DRM_CHIPONE_ICN6211
+ tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge"
+ depends on OF
+ select DRM_MIPI_DSI
+ select DRM_PANEL_BRIDGE
+ help
+ ICN6211 is MIPI-DSI/RGB Converter bridge from chipone.
+
+ It has a flexible configuration of MIPI DSI signal input
+ and produce RGB565, RGB666, RGB888 output format.
+
+ If in doubt, say "N".
+
config DRM_CHRONTEL_CH7033
tristate "Chrontel CH7033 Video Encoder"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index 86e7acc76f8d..3eb84b638988 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_CDNS_DSI) += cdns-dsi.o
+obj-$(CONFIG_DRM_CHIPONE_ICN6211) += chipone-icn6211.o
obj-$(CONFIG_DRM_CHRONTEL_CH7033) += chrontel-ch7033.o
obj-$(CONFIG_DRM_DISPLAY_CONNECTOR) += display-connector.o
obj-$(CONFIG_DRM_LONTIUM_LT9611) += lontium-lt9611.o
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c
new file mode 100644
index 000000000000..a6151db95586
--- /dev/null
+++ b/drivers/gpu/drm/bridge/chipone-icn6211.c
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Amarula Solutions(India)
+ * Author: Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+#include <drm/drm_of.h>
+#include <drm/drm_print.h>
+#include <drm/drm_mipi_dsi.h>
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#define HACTIVE_LI 0x20
+#define VACTIVE_LI 0x21
+#define VACTIVE_HACTIVE_HI 0x22
+#define HFP_LI 0x23
+#define HSYNC_LI 0x24
+#define HBP_LI 0x25
+#define HFP_HSW_HBP_HI 0x26
+#define VFP 0x27
+#define VSYNC 0x28
+#define VBP 0x29
+
+struct chipone {
+ struct device *dev;
+ struct drm_bridge bridge;
+ struct drm_bridge *panel_bridge;
+ struct gpio_desc *enable_gpio;
+ struct regulator *vdd1;
+ struct regulator *vdd2;
+ struct regulator *vdd3;
+};
+
+static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct chipone, bridge);
+}
+
+static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge)
+{
+ return &bridge->encoder->crtc->state->adjusted_mode;
+}
+
+static inline int chipone_dsi_write(struct chipone *icn, const void *seq,
+ size_t len)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev);
+
+ return mipi_dsi_generic_write(dsi, seq, len);
+}
+
+#define ICN6211_DSI(icn, seq...) \
+ { \
+ const u8 d[] = { seq }; \
+ chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \
+ }
+
+static void chipone_enable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ struct drm_display_mode *mode = bridge_to_mode(bridge);
+
+ ICN6211_DSI(icn, 0x7a, 0xc1);
+
+ ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff);
+
+ ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff);
+
+ /**
+ * lsb nibble: 2nd nibble of hdisplay
+ * msb nibble: 2nd nibble of vdisplay
+ */
+ ICN6211_DSI(icn, VACTIVE_HACTIVE_HI,
+ ((mode->hdisplay >> 8) & 0xf) |
+ (((mode->vdisplay >> 8) & 0xf) << 4));
+
+ ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay);
+
+ ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start);
+
+ ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end);
+
+ ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00);
+
+ ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay);
+
+ ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start);
+
+ ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end);
+
+ /* dsi specific sequence */
+ ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80);
+ ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28);
+ ICN6211_DSI(icn, 0xb5, 0xa0);
+ ICN6211_DSI(icn, 0x5c, 0xff);
+ ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01);
+ ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92);
+ ICN6211_DSI(icn, 0x6b, 0x71);
+ ICN6211_DSI(icn, 0x69, 0x2b);
+ ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40);
+ ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98);
+
+ /* icn6211 specific sequence */
+ ICN6211_DSI(icn, 0xb6, 0x20);
+ ICN6211_DSI(icn, 0x51, 0x20);
+ ICN6211_DSI(icn, 0x09, 0x10);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_pre_enable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+ int ret;
+
+ if (icn->vdd1) {
+ ret = regulator_enable(icn->vdd1);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD1 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd2) {
+ ret = regulator_enable(icn->vdd2);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD2 regulator: %d\n", ret);
+ }
+
+ if (icn->vdd3) {
+ ret = regulator_enable(icn->vdd3);
+ if (ret)
+ DRM_DEV_ERROR(icn->dev,
+ "failed to enable VDD3 regulator: %d\n", ret);
+ }
+
+ gpiod_set_value(icn->enable_gpio, 1);
+
+ usleep_range(10000, 11000);
+}
+
+static void chipone_post_disable(struct drm_bridge *bridge)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ if (icn->vdd1)
+ regulator_disable(icn->vdd1);
+
+ if (icn->vdd2)
+ regulator_disable(icn->vdd2);
+
+ if (icn->vdd3)
+ regulator_disable(icn->vdd3);
+
+ gpiod_set_value(icn->enable_gpio, 0);
+}
+
+static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags)
+{
+ struct chipone *icn = bridge_to_chipone(bridge);
+
+ return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags);
+}
+
+static const struct drm_bridge_funcs chipone_bridge_funcs = {
+ .attach = chipone_attach,
+ .post_disable = chipone_post_disable,
+ .pre_enable = chipone_pre_enable,
+ .enable = chipone_enable,
+};
+
+static int chipone_parse_dt(struct chipone *icn)
+{
+ struct device *dev = icn->dev;
+ struct drm_panel *panel;
+ int ret;
+
+ icn->vdd1 = devm_regulator_get_optional(dev, "vdd1");
+ if (IS_ERR(icn->vdd1)) {
+ ret = PTR_ERR(icn->vdd1);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd1 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD1 regulator: %d\n", ret);
+ }
+
+ icn->vdd2 = devm_regulator_get_optional(dev, "vdd2");
+ if (IS_ERR(icn->vdd2)) {
+ ret = PTR_ERR(icn->vdd2);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd2 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD2 regulator: %d\n", ret);
+ }
+
+ icn->vdd3 = devm_regulator_get_optional(dev, "vdd3");
+ if (IS_ERR(icn->vdd3)) {
+ ret = PTR_ERR(icn->vdd3);
+ if (ret == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ icn->vdd3 = NULL;
+ DRM_DEV_DEBUG(dev, "failed to get VDD3 regulator: %d\n", ret);
+ }
+
+ icn->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(icn->enable_gpio)) {
+ DRM_DEV_ERROR(dev, "failed to get enable GPIO\n");
+ return PTR_ERR(icn->enable_gpio);
+ }
+
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+ if (ret)
+ return ret;
+
+ icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(icn->panel_bridge))
+ return PTR_ERR(icn->panel_bridge);
+
+ return 0;
+}
+
+static int chipone_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct chipone *icn;
+ int ret;
+
+ icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL);
+ if (!icn)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, icn);
+ icn->dev = dev;
+
+ ret = chipone_parse_dt(icn);
+ if (ret)
+ return ret;
+
+ icn->bridge.funcs = &chipone_bridge_funcs;
+ icn->bridge.type = DRM_MODE_CONNECTOR_DPI;
+ icn->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&icn->bridge);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_bridge_remove(&icn->bridge);
+ dev_err(dev, "failed to attach dsi\n");
+ }
+
+ return ret;
+}
+
+static int chipone_remove(struct mipi_dsi_device *dsi)
+{
+ struct chipone *icn = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_bridge_remove(&icn->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id chipone_of_match[] = {
+ { .compatible = "chipone,icn6211", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, chipone_of_match);
+
+static struct mipi_dsi_driver chipone_driver = {
+ .probe = chipone_probe,
+ .remove = chipone_remove,
+ .driver = {
+ .name = "chipone-icn6211",
+ .owner = THIS_MODULE,
+ .of_match_table = chipone_of_match,
+ },
+};
+module_mipi_dsi_driver(chipone_driver);
+
+MODULE_AUTHOR("Jagan Teki <jagan at amarulasolutions.com>");
+MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge");
+MODULE_LICENSE("GPL");
--
2.25.1
More information about the dri-devel
mailing list