[PATCH v7] dt-bindings: display: panel: one file of all simple LVDS panels with dual ports

[Rob Herring]

On Thu, 11 Feb 2021 12:27:52 +0800, Liu Ying wrote:
> To complement panel-simple.yaml, create panel-simple-lvds-dual-ports.yaml.
> panel-simple-lvds-dual-ports.yaml is for all simple LVDS panels that
> have dual LVDS ports and require only a single power-supply.
> The first port receives odd pixels, and the second port receives even pixels.
> Optionally, a backlight and an enable GPIO can be specified as properties.
> 
> Panels with swapped pixel order, if any, need dedicated bindings.
> 
> Migrate 'auo,g133han01', 'auo,g185han01', 'auo,g190ean01',
> 'koe,tx26d202vm0bwa' and 'nlt,nl192108ac18-02d' over to the new file.
> 
> The objectives with one file for all the simple LVDS panels with dual ports are:
> - Make it simpler to add bindings for this kind of LVDS panels
> - Keep the number of bindings file lower
> - Keep the binding documentation for this kind of LVDS panels more consistent
> - Make it possible for drivers to get pixel order via
>   drm_of_lvds_get_dual_link_pixel_order(), as the 'ports' property is required
> 
> Suggested-by: Sam Ravnborg <sam at ravnborg.org>
> Cc: Thierry Reding <thierry.reding at gmail.com>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> Cc: David Airlie <airlied at linux.ie>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Lucas Stach <l.stach at pengutronix.de>
> Cc: Sebastian Reichel <sebastian.reichel at collabora.com>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v6->v7:
> * Reference '#/$defs/port-base' instead of '#/properties/port'. (Rob)
> 
> v5->v6:
> * Use OF graph schema.
> * Drop Rob's R-b tag, as review is needed.
> 
> v4->v5:
> * Require the 'ports' property and update commit message accordingly. (Rob)
> * Add Rob's R-b tag.
> 
> v3->v4:
> * Add type and descriptions for dual-lvds-{odd,even}-pixels properties.
>   Also, update descriptions for port at 0 and port at 1 properties accordingly. (Rob)
> 
> v2->v3:
> * Do not allow 'port' property. (Rob)
> * Define port number. (Rob)
> * Specify 'dual-lvds-odd-pixels' and 'dual-lvds-even-pixels' properties. (Rob)
> 
> v1->v2:
> * Correct pixel order in example LVDS panel node.
> 
>  .../panel/panel-simple-lvds-dual-ports.yaml        | 118 +++++++++++++++++++++
>  .../bindings/display/panel/panel-simple.yaml       |  10 --
>  2 files changed, 118 insertions(+), 10 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/panel-simple-lvds-dual-ports.yaml
> 

Reviewed-by: Rob Herring <robh at kernel.org>